Please help me put together a kit! Please! :)

[Katya]

I moved on to the Vamo because it seems everyone eventually gets to vv or vw. It's relatively cheap and works well. Why spend all the money on growing pains. I will never recommend the provari unless they cut pricing half at least.

If they cut the price in half, people might stop seeing it as a status symbol and recommend it to every new vaper.

Don't shoot!

 

[Reach4theStars]

Is there a good Vamo kit? or do I have to find pieces and parts. LOL

 

[Rainocig]

New tech = more$
New toys = more $
More vaping = more $
Are we saving $ by vaping or spending more?
I thought this was a quit smoking device.
Not get a new addiction to tech.

 

[Rainocig]

Is there a good Vamo kit? or do I have to find pieces and parts. LOL

The kit isn't worth it

 

[Rainocig]

http://www.vaporbeast.com/product_p/sk44.htm

 

[Reach4theStars]

New tech = more$
New toys = more $
More vaping = more $
Are we saving $ by vaping or spending more?
I thought this was a quit smoking device.
Not get a new addiction to tech.

I look at it this way. In my book, its relaxing entertainment and it keeps me away from smoking. I'd have spent more money hanging at a bar drinking. So a few kits equals to a few nights at a bar. lol I'd rather be home vaping, then out at a bar. ROFL

 

[bfrie]

correction: my spinner from smokeless image has 808 threading, wasnt aware that there was other versions

 

[danimal40]

and a Penelope

Honestly the vamo is the way to go but, it's just too much too soon. Have a bud that is edging closer to trying vaping to quit every time we hang. Always stealing my Bobas and cc coffee. He is someone I'll be starting with the vamo set up. Others I just send the same link I posted..

It's simple and the EVODs work consistent enough and are real easy to use on top of giving a great vape to be comfortable enough to recommend to a new vaporee..?

did you give the the 10% off code "5H2XT"

 

[supertrunker]

silver bullet is reliable and fearsome too and all 510 tanks work! Was my first mod and never a day's trouble from it. Have about 15 Nova tanks and they all still work too. Do i like flashy displays you bet! dare i drop one? err nah!

My mrs has an eVic but you need to machine code to figure out 'help' it's saying. My advice for noobs has always been the same: get something you can grow into be it a SB or whatever. VV is likely confusing until you mess with different setups and only then is is remotely important - in which case you can 'kick' - add a vv board to a lot of them.

Far more important is reliablility and so i go Ego, SB and so on.

T

 

[Reach4theStars]

http://www.vaporbeast.com/product_p/sk44.htm

YAY! Thank you! That makes life super easy. Being new, that is my biggest problem, hunting for pieces and parts, when I have no idea what parts I need.

 

[danimal40]

correction: my spinner from smokeless image has 808 threading, wasnt aware that there was other versions

yea that is SI's own battery that they have produced all SI batteries have 808 thread...the vision spinner has 510/ego threads

 

[niczgreat]

Hi I got tired of duplicating my post so I just posted a thread with recommendations
http://www.e-cigarette-forum.com/fo...ew-vapors-bump-if-you-think-its-valuable.html

Itaste Mvp is simpler than the Vamo and more elegant.

 

[Rainocig]

Vv is confusing. I say go vw. Set it and forget it.

 

[bfrie]

yea that is SI's own battery that they have produced all SI batteries have 808 thread...the vision spinner has 510/ego threads

kind of annoyed me actually, thought they would have mentioned that on their site somewhere before i bought it.... oh well now ill just have to learn to love it i guess

 

[Sikko]

http://.........blogspot.com/2013/03/in-stock-chrome-vamo-deal-3697.html

Lowest In-stock price I've seen. This is only the tube however. You would still need batteries, here are some 18650's

ElectronicStix.Com · Efest IMR 18650 high drain Li-Mn 2000 mAH (pair)
(I'm not positive if the vamo will take button tops or flat tops you will want to verify this with someone that has one).

Charger:

http://www.electronicstix.com/collections/mod-battery-chargers/products/nitecore-intellicharge-i2

Evods:

ElectronicStix.Com · Kanger EVOD Bottom Coil Changeable Cartomizer

You might be able to find cheaper prices on parts, but here's your general kit. I used electronicstix because they are local to me and they have good prices for the most part.

 

[Reach4theStars]

Hi I got tired of duplicating my post so I just posted a thread with recommendations
http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/395952-recommendation-all-new-vapors-bump-if-you-think-its-valuable.html

Thanks! Very Very helpful! Sorry, I bet you get alot of noobies like me. I spent several weeks going through this forum and vendors, just to end up more confused. Everyone has been so helpful!!!!! Like I said, I think for me and I'm sure for other noobie's like myself, its easier for us if we can get a kit, simply because we are not familiar with the parts required at such an early stage in vaping.

 

[EddieAdams]

Is there a good Vamo kit? or do I have to find pieces and parts. LOL

oh no....
the vamo in full size 18650 battery is huge. fyi. If you're okay with that then fine. If it vibrated instead of vaped no one would be surprised. Don't leave it on the night stand.
New and improved all-star starter kit
vamo v2 free-cigs.com stainless
4 18350imr button tops
2 18650imr button tops
xtar wp2 charger$20 wherever you can find it
5Kanger EVOD clearomizers
5 replacement heads
32 and 30 Kanthal a-1 wire eBay
wick material of choice 1mm

I use natural 1mm hemp twine from lovepedal eBay
boil3 Times for 20 minutes changing water each time to remove corn starch used to make the twine. Then leave in oven overnight on warm setting to dry.160-170° prevents any mold growth.

 

[EddieAdams]

did you give the the 10% off code "5H2XT"

Will now. Think I only ever had a 5%.

No I won't. Let them learn the way I did...

 

[Reach4theStars]

http://.........blogspot.com/2013/03/in-stock-chrome-vamo-deal-3697.html

Lowest In-stock price I've seen. This is only the tube however. You would still need batteries, here are some 18650's

ElectronicStix.Com · Efest IMR 18650 high drain Li-Mn 2000 mAH (pair)
(I'm not positive if the vamo will take button tops or flat tops you will want to verify this with someone that has one).

Charger:

http://www.electronicstix.com/collections/mod-battery-chargers/products/nitecore-intellicharge-i2

Evods:

ElectronicStix.Com · Kanger EVOD Bottom Coil Changeable Cartomizer

You might be able to find cheaper prices on parts, but here's your general kit. I used electronicstix because they are local to me and they have good prices for the most part.

Awesome! I read that a bottom coil is so much better then the top, which is understandable as to why. Thank you for the combination of links.

 

[Rainocig]

oh no....
the vamo in full size 18650 battery is huge. fyi. If you're okay with that then fine. If it vibrated instead of vaped no one would be surprised. Don't leave it on the night stand.
New and improved all-star starter kit
vamo v2 free-cigs.com stainless
4 18350imr button tops
2 18650imr button tops
xtar wp2 charger$20 wherever you can find it
5Kanger EVOD clearomizers
5 replacement heads
32 and 30 Kanthal a-1 wire eBay
wick material of choice 1mm

I use natural 1mm hemp twine from lovepedal eBay
boil3 Times for 20 minutes changing water each time to remove corn starch used to make the twine. Then leave in oven overnight on warm setting to dry.160-170° prevents any mold growth.

Go with this.