Polishing GG's

Status
Not open for further replies.

CaptSteve

Airborn ECF Guru
ECF Veteran
Verified Member
Nov 20, 2011
14,537
40,523
41,000ft at M 0.85
Huff what I did with the polishing was actually a big risk from what I know now. So I highly recommend you talk to guys in the know. If you just want some simple polish/maintenance then go with a cape cod cloth, for anything more than that I suggest you seek some knowledgeable advise.
 
Last edited:

PaulieD

Vaping Master
ECF Veteran
Verified Member
Jan 15, 2012
4,164
672
Beach
Huff,
After the Cape Cod polishing get a cotton rag...old tshirt..and so on. Now put a little bit of liquid wax on one corner and lightly rub the metal....the elbow grease part is done at this point.
When the light film of wax you coated it with turns like a dry haze just rub the crap out of it with that cotton t-shirt, just make sure there is nothing on the t-shirt...paint or anything that dried up on the shirt...making it a rag!...and voila.
Then the most important part!!!!
Take a pic and send it to dspin for approval!:laugh::ohmy:
 
Status
Not open for further replies.

Users who are viewing this thread