Precise ELA Telescoping MOD by Super-T Manufacturing PT 2

[anavidfan]

Yes, and wouldnt it be fabulous? Many will say , then why not get a P+? well for me at least, it would be heaven. I have always had a "crush" on the P+ , it was in my cart for almost a year, but the diameter was always the deterrent, I fell in love with a 23mm diameter atomizer. Not that it looks bad , but a 24mm P+ would be a dream come true

 

[StrikeIII]

Oh geez, that package was a couple weeks ago? I think it was posted that they were "found" pieces? or extras? NOt sure if they were the new production of ELAs? I think he also made up some new ELAs and they sold out fast. They were posted on the SUper-t friends page on Facebook? I sure hope any new units are posted here.

I especially hope that the solid tubes for ELA are also announced with a bit of fair warning. I tend to miss out a lot and I reallly want at least 1 satin and 1 polished 18500 tube and if they are not too expensive I want at least 1 each in the 18650 size. Even though there are many "not interesteds" I think the solid tubes will sell like hot cakes. 100's of those awkward tube made by a 3rd party are out there.

Thanks anavid.

Sent from my HTC One_M8 using Tapatalk

 

[anavidfan]

You are welcome, now... please dont take my information as the "truth" . I tend to be a bit delusional / or scatter brained....... My memory does not always serve me well....

 

[theECB]

+1 on the solid tube for 18650. I would like if if the package also came with a neg post and washer kit since that's how we'll then need to adjust for different atomizers and battery length combos. I still need to snag a 22mm slant cap too.


Sent from my iPhone using Tapatalk

 

[theECB]

Sent from my iPhone using Tapatalk

 

[anavidfan]

As long as we're dreaming, older Super-Ts had these really cool angled vent holes drilled through the thicker part of the body. I want some of those!

I forgot when you posted this, that I would love to see that one with the angled vents....... You wouldnt happen to have one in your "vintage" Super T collection?

 

[poconojo]

I just put the brass accent rings and the brass button on my ELA and it looks pretty cool. I still like the all stainless look better though. The ELA is my favorite mod of all time. I have to get another one! My super t products are growing and taking over my other vaping gear. I pretty much only use super t products now. I may start selling my other gear. I have never sold any of my vaping gear, but it is just collecting dust now.

 

[Cucco]

I just put the brass accent rings and the brass button on my ELA and it looks pretty cool. I still like the all stainless look better though. The ELA is my favorite mod of all time. I have to get another one! My super t products are growing and taking over my other vaping gear. I pretty much only use super t products now. I may start selling my other gear. I have never sold any of my vaping gear, but it is just collecting dust now.

All stainless = better.

 

[snork]

I forgot when you posted this, that I would love to see that one with the angled vents....... You wouldnt happen to have one in your "vintage" Super T collection?

Sorry, I'm in the middle of a seven day work stretch and I'm not paying attention.
Yes, my T1, Super 6 and new old Precise 16340 all have those holes. I'll try to take an anavidfan-worthy picture sometime soon.

 

[forcedfuel50]

Hello everyone. Feeling a bit blue today. On the brighter side of things i'll be unveiling some of the "tweaks" we did to the ELA. Believe it or not, the original ELA design is going on two years old! We'll also be putting up another small batch tomorrow. Those who have pending ELA orders, they do include the new revisions! I really think you are going to like what we did!

 

[anavidfan]

Sorry that you are feeling the "blues"

Listening to Blues music really helps , believe me............
I hope the coming of spring helps to snap you out of it. I cant wait to see what changes you bring us.

 

[Cucco]

Hello everyone. Feeling a bit blue today. On the brighter side of things i'll be unveiling some of the "tweaks" we did to the ELA. Believe it or not, the original ELA design is going on two years old! We'll also be putting up another small batch tomorrow. Those who have pending ELA orders, they do include the new revisions! I really think you are going to like what we did!

Blue.. So sorry to hear. Unfortunately, me too.

 

[StrikeIII]

Hello everyone. Feeling a bit blue today. On the brighter side of things i'll be unveiling some of the "tweaks" we did to the ELA. Believe it or not, the original ELA design is going on two years old! We'll also be putting up another small batch tomorrow. Those who have pending ELA orders, they do include the new revisions! I really think you are going to like what we did!

Sorry to hear that hope you and Cucoo get better quickly.

Do you know what time we should expect the ELAs to go up?

Sent from my HTC One_M8 using Tapatalk

 

[snork]

I forgot when you posted this, that I would love to see that one with the angled vents....... You wouldnt happen to have one in your "vintage" Super T collection?

Here's a picture (clicky enlargeable) of nonvented (EGADS) Precise 18650, sloped hole Precise 16340 and T1. My Super 6 is missing in action.

http://www.e-cigarette-forum.com/fo...t-picture-comment-thread-57.html#post13388722

 

[badwisdom]

Hello everyone. Feeling a bit blue today. On the brighter side of things i'll be unveiling some of the "tweaks" we did to the ELA. Believe it or not, the original ELA design is going on two years old! We'll also be putting up another small batch tomorrow. Those who have pending ELA orders, they do include the new revisions! I really think you are going to like what we did!

woooooooo......so cool

 

[EmE247]

Hello everyone. Feeling a bit blue today. On the brighter side of things i'll be unveiling some of the "tweaks" we did to the ELA. Believe it or not, the original ELA design is going on two years old! We'll also be putting up another small batch tomorrow. Those who have pending ELA orders, they do include the new revisions! I really think you are going to like what we did!

@forcedfuel50 Any ETA on the release tomorrow? Really don't want to F5 all day long.

 

[anavidfan]

Now, I wonder if I should take my ELA tube fund and put it into another ELA You know, the "Trio" thing

Any one know the new price of the ELAs and if there is still satin or polished as a choice?

 

[Riverboat]

@forcedfuel50 Any ETA on the release tomorrow? Really don't want to F5 all day long.

Details David......What improvements did you make to the ELA ???

I have an original Satin ELA and want a Flower top cap...before I sent in my center post for new fitting so it works with new cap....Will you be selling any Rhodium plated center top post so I can avoid down time?

 

[jkim5708]

Details David......What improvements did you make ???

+1...........

 

[forcedfuel50]

@forcedfuel50 Any ETA on the release tomorrow? Really don't want to F5 all day long.

We'll have some up around 300pm central time. I'll do my very best to get up some pics before then to detail some revisions we made. It does come in Satin or Polished if you'd like.