PrecisePlus 16340 and PrecisePlus 10440 Clearance Sale!

[Freckle]

I ordered 5 of the 10440 batteries. I know it is so not recommended to use anything but the aw, but I found tonight a efest imr 700 mah 10440. Though about ordering a few just to try out.



**Edit I just tried to find those batteries again, and no luck, I must of been confused. Typical, it happens a lot. I think I found 16340's at 700 mah not 10440's

 

[forcedfuel50]

Just a note, there is an old photo of a 10440 with brass end caps on the site, but we no longer carry the brass (we found out long ago brass only lasts about 3-6 months before it strips out in the fine atomizer thread area due to brass being soft).

We have the 10440 in both all satin or two tone, both of which are all stainless steel.

Did i mention these are in stock and ship within 1-2 business days of ordering?

 

[Freckle]

I am actually glad the 10440 is not brass, I almost ordered the satin one because I was scared I would get brass.

 

[forcedfuel50]

You know I didn't think about this before, but these will still come with the warranties right?

Yes, they have a full lifetime warranty.

 

[Jacoji]

Yes, Thanks Snork. I would need that classy Tanbur tip too.

 

[snork]

Uh-oh. There I go influencing people again.
I'm glad my videos have been useful.

 

[Freckle]

Yes, they have a full lifetime warranty.

That is great news! Time to stalk the mailman! Stoked!

 

[rcbell.N51]

You know, I've got a good number of expensive mods and high end genesis atomizers, and I still find the setup snork uses in his video is my go to vape at home. I use a long barrel HH357 and polished standard length Super-T velocity tip to avoid the spitting issue on my P10. You really couldn't ask for more then a P10 for small devices. I may have to pick up another.

I think that may be a standard HH357 in the picture rather then the long barrel I use now.

 

[RaymondK]

Is it possible to get the Tanbur Tip also with the 10440?

 

[Jacoji]

... and a 10440. OK, so that puts me at 4 PrecisePlus. Not quite collector status - just a healthy use-specific variety.

 

[Riverboat]

You know, I've got a good number of expensive mods and high end genesis atomizers, and I still find the setup snork uses in his video is my go to vape at home. I use a long barrel HH357 and polished standard length Super-T velocity tip to avoid the spitting issue on my P10. You really couldn't ask for more then a P10 for small devices. I may have to pick up another.
I think that may be a standard HH357 in the picture rather then the long barrel I use now.

P+10.........I would hate to miss out...will I use it though? I just sent 4 of my new HH357 attys back to Hanna, he upgraded them from standard barrels to long barrels......way better IMO.........

 

[Freckle]

What is the diameter of the P+10? I truly think the hornet may look great on it. Never tried an hh357, I guess there is a first time for most everything, if the hornet doesn't work, I may go that route.

 

[vaptamist]

12.7mm, I think

 

[Riverboat]

Never tried an hh357, I guess there is a first time for most everything, if the hornet doesn't work, I may go that route.

HH357's Rock! especially the new VII specs...Im using a 901 thats 5+ weeks old and it hits as good as the day I first fired it....

 

[Freckle]

12.7mm, I think

Hornet I believe is 13mm. Very close, very close indeed, I guess I will find out when it gets here. Thank you for the answer!

 

[forcedfuel50]

What is the diameter of the P+10?

12.2 mm at its widest.

 

[snork]

HH357's Rock! especially the new VII specs...Im using a 901 thats 5+ weeks old and it hits as good as the day I first fired it....

So you and I had talked about me revisiting a 357, specifically the 901 version. I got a custom PG 3ohm standard barrel 901 on Friday and used it over the weekend with my ShockWave and a Kick. Somehow I lucked out and my Kick has been kicking along very nicely without me having to baby it.
This 901 357 does indeed rock. Awesome vapor and a great draw. Runs a little hotter than I like so I turned down the Kick to about 7.5and the flavor shines then too. This configuration eliminates my major gripes with the standard 510 HH, the leaking and spitting. Still quite gurgly sounding, the nature of it.
Hopefully I'll get some longevity out of it. Thanks for the collaboration. You and I hit on something nice there.

 

[vaptamist]

I'm going to have to try the 901 again. I think the one I got was bad. I also can't stand using adapters on my Precise. I'm OCD about the rhodium plated contacts and so I'm reluctant to compromise with an adapter.

 

[Riverboat]

So you and I had talked about me revisiting a 357, specifically the 901 version. I got a custom PG 3ohm standard barrel 901 on Friday and used it over the weekend with my ShockWave and a Kick. Somehow I lucked out and my Kick has been kicking along very nicely without me having to baby it.
This 901 357 does indeed rock. Awesome vapor and a great draw. Runs a little hotter than I like so I turned down the Kick to about 7.5and the flavor shines then too. This configuration eliminates my major gripes with the standard 510 HH, the leaking and spitting. Still quite gurgly sounding, the nature of it.
Hopefully I'll get some longevity out of it. Thanks for the collaboration. You and I hit on something nice there.

The new HH357 VII spec 510's are just as good, same coil setup as the 901...I talked to Hanna about this....He was right, no spiting or leaking anymore...... My kick was having problems last night, I had to keep removing and reinserting it...tody it is working flawless..Tempermental little things...

I'm going to have to try the 901 again. I think the one I got was bad. I also can't stand using adapters on my Precise. I'm OCD about the rhodium plated contacts and so I'm reluctant to compromise with an adapter.

You must of, of all the HH's I have had in the past 13 months I only had 1 bad one..it died after 4-5 days, tossed it.. Try a 901 you will like it....
I cant belive how long mine is lasting.....and I vape em at 10 watts all day long....
One thing I stoped doing was dry burning them...it seemed to make the resistance drop way to fast...
The 5 1/2 week old one I have started at 3.0 ohm and has settled at 2.5 ohms where it has been for 2 1/2 weeks....

 

[forcedfuel50]

Just a note, there was an old photo of a 10440 with brass end caps on the site, but we no longer carry the brass (we found out long ago brass only lasts about 3-6 months before it strips out in the fine atomizer thread area due to brass being soft).

We have the 10440 in both all satin or two tone, both of which are all stainless steel. Two tone has a satin SS body with polished SS caps.

Did i mention these are in stock and ship within 1-2 business days of ordering?