Printed Mechanical Bottom Feeder Mod

[Fishcakes]

Oh wow. Didnt realize itd cost that much! Still, im subscribing just in case somebody plans one. Its a very cool idea to have a bottom feeder with completely user replaceable parts

 

[RGLP4Lyfe]

Yeah fish I love mine! I have one I've been vaping since Jan and have another shell coming soon! But after that I'm out of parts kits and I do want more Peko's!

-Mark

 

[MsLoud]

About to order from sculpteo...any coupon codes out right now? This is my first order and I tried gdeal, ambassador, fullcolor ...none of those work

 

[RGLP4Lyfe]

STATEOF3D
all caps!

-Mark

 

[MsLoud]

Sweet! Thanks!

 

[RGLP4Lyfe]

Sweet! Thanks!

Very welcome! Got mad love for the Peko and anybody wanting one! Hope you enjoy, i know you will! I have #2 on the way! Actually sold an LP grand to fund the 2nd Peko! And too boot, I'll have money left over!

-Mark

 

[MsLoud]

Yea. I have a few more kits so starting with these 2 to build. Excited!

 

[ronnbert]

Hey guys... Im kinda late to the party on this one.. Any plans for another coop for the v2.1 peko? Looks like a good weekend project

Its turned into more of a month long project for me lol. I am finally getting around to paint my shell, just finished the second coat (acrylic paint is doing well!) and going to try to get a primer coat or two tonight. That is if I don't get a bit too innebriated.

ETA: the reason it has taken so long is due to work and school keeping me very busy, not that it is hard.

 

[Fishcakes]

Its turned into more of a month long project for me lol. I am finally getting around to paint my shell, just finished the second coat (acrylic paint is doing well!) and going to try to get a primer coat or two tonight. That is if I don't get a bit too innebriated.

Haha. Im not too good at painting and sanding. I figure if i can just get the thing working in a weekend itll be a success. The guys at work always put me in charge of breaking things and putting stuff together that doesnt need to look pretty

 

[RGLP4Lyfe]

Its turned into more of a month long project for me lol. I am finally getting around to paint my shell, just finished the second coat (acrylic paint is doing well!) and going to try to get a primer coat or two tonight. That is if I don't get a bit too innebriated.

ETA: the reason it has taken so long is due to work and school keeping me very busy, not that it is hard.

Oh man I couldn't have stared at mine that long without wanting to vape it! The day after my birthday it came in the mail (it was a birthday present) I had it built and vaping in probably 45 minutes. And that was me sitting there with my 5 week old daughter in my lap and fiddling to get the mod together. I also was finicky about getting the 510 perfect and Nuppin flush. She stayed quiet and content while daddy built his birthday mod! Then a few days after I got my initial "can't put it down" phase I tore it apart and graffiti/ clear coated it.


-Mark

 

[ronnbert]

Haha. Im not too good at painting and sanding. I figure if i can just get the thing working in a weekend itll be a success. The guys at work always put me in charge of breaking things and putting stuff together that doesnt need to look pretty

I am not that great either, especially since I am a bit OCD. Everything has to be just right lol. If you have time to dedicate to it, I am sure you could get it going with little effort. You may want to chip a bit extra for the colored parts and in a polished finish. That way all you would need to do is clear coat and assemble! I just wanted it to be uniquely mine with my blood, sweat and tears in it.

Oh man I couldn't have stared at mine that long without wanting to vape it! The day after my birthday it came in the mail (it was a birthday present) I had it built and vaping in probably 45 minutes. And that was me sitting there with my 5 week old daughter in my lap and fiddling to get the mod together. I also was finicky about getting the 510 perfect and Nuppin flush. She stayed quiet and content while daddy built his birthday mod! Then a few days after I got my initial "can't put it down" phase I tore it apart and graffiti/ clear coated it.


-Mark

I have just been so busy with a new semester and work keeping me busy. Trust me, I have been drooling to get this together! I am hoping to get it together tonight. I saw your grafitti shell, it looks pretty sick! Who knows when I will get my other kits assembled lol.

 

[RGLP4Lyfe]

Thanks Ronnbert! I have been painting/ drawing since I was a kid. I specialize in graffiti/ lettering. I have also done tattoos. I use to work in a shop a few years back. But have since stopped and only do a few on the side. Glad you liked the graffiti! It is one of a kind!

-Mark

 

[Fishcakes]

Anybody got a link to the google doc with those cheaper/ lower quantity parts? The only parts list i can find is on shapeways site

 

[RGLP4Lyfe]

Order from sculpteo not shape ways! Holdup let me get ya a link! Coupon code for sculpteo is STATEOF3D all caps

-Mark
http://www.e-cigarette-forum.com/forum/showthread.php?t=649413

Parts list, first post at way bottom. Says Peko parts Google doc. At top of Google doc on left choose "sheet 3"

 

[kingdal]

Hi everyone. I'm getting ready to order parts for this mod. Quick question: the build doc says its for v1.1, but the parts on Sculpteo are for v1.1 and v2.1. Any major differences between the two? Is there any reason I should get one or the other? Thanks

EDIT: ehhh, ignore my question. Just noticed on the site it says v1.1 upgraded to v2.1. I'll learn to read better at some point....

 

[Fishcakes]

Order from sculpteo not shape ways! Holdup let me get ya a link! Coupon code for sculpteo is STATEOF3D all caps

-Mark
Gdeal Bottom Feeders (Tutorials/Parts List/Pictures) - Please take questions to the spec thread

Parts list, first post at way bottom. Says Peko parts Google doc. At top of Google doc on left choose "sheet 3"

Thanks!!!!

 

[ronnbert]

Thanks Ronnbert! I have been painting/ drawing since I was a kid. I specialize in graffiti/ lettering. I have also done tattoos. I use to work in a shop a few years back. But have since stopped and only do a few on the side. Glad you liked the graffiti! It is one of a kind!

-Mark

Thats pretty awesome! I am not that creative, cannot draw well (I blame OCD tendencies not being satisfied), though I did take a 3D Modelling class when I was working on my first Associates and my teacher and class enjoyed my work and said I grew as an artist. I also got one of my pieces published in a local art magazine. It was a fun class, but kept me on my toes.

 

[ronnbert]

So, do yall clear coat inside the shell or just the outside of all the parts?

 

[TyCreek]

Solder lugs are readily available as crimp terminals

Just snip off the crimp end and there's a nice spot for solder

Sent from my iPhone using Tapatalk

 

[ronnbert]

Preview pic!