Pro Line of Notcigs Pv's !!!!!!!!!!!!!!!!!

[BuzzKill]

Waiting on the new Pro. My Infinity now has an "expert user" mode -- periodically have to hit the bottom to get the batteries back working again. Something has to be slightly out of kilter, it does this with all 3 pairs of batteries, which are otherwise charging fine, not disformed, provide long run time between charges. Darned thing is, it does work well if I do this, and it's preferable to sending it back on RMA (I'd rather slap it once in a while rather than lose it for even a week )

Mark some of the batteries have a LEAN to them , put them on a table bottom down IF there is a lean put this one in the tube LAST this should help.

 

[nbourbaki]

I'm thinking about a Buzz Pro with an 801 connector as a dedicated IKV Fusion PV.

 

[mistinthewoods]

I'm thinking about a Buzz Pro with an 810 connector as a dedicated IKV Fusion PV.

An 801 connecter would work better than an 810. *teehee*
Just joshin', I know it was a typo.

 

[BuzzKill]

Nice catch Mist. !!!

 

[nbourbaki]

Thanks and fixed.

 

[Rosco]

Mark some of the batteries have a LEAN to them , put them on a table bottom down IF there is a lean put this one in the tube LAST this should help.

Ya know Mike, there was a time when I stood on the table, I leaned too. Just sayin'

 

[Bovinia]

LOL Rosco, me too.

 

[smilin0117]

Question on the pro version of both...are you able to "set" you voltage? Once you find the voltage you like is there a way to keep it set that way? A friend of mine has the infinity and i noticed how the wheel is pretty easy change which is great if you want to change often, but thats the reason why i love my buzz. I have found the voltage I like so i just leave it that way.

Thanks guys...

 

[Bovinia]

With my Infinity I have never had a problem with the wheel changing just by use. It isn't hard for me to change it, but mine does take intentional effort.

 

[markfm]

I haven't noticed the wheel moving at all, seems to take a pretty conscious effort. The only wheel-related thing is that the paint line on the wheel itself came off pretty quickly, but then again I just rotate it "to taste" with whatever I'm vaping. Voltage, resistance, whatever meters don't matter to me, just more points of failure -- turn the wheel to get the vapor/hit you want, it only takes a couple puffs for a given carto/liquid to tune it in. Infinity has been really solid for me, including no issues with the occasional user abuse (drops onto floors -- it does roll well )

 

[smilin0117]

Maybe its just her's then...but her wheel was pretty easy to move. Does this mean there is not a "locking" mechanism on the pro line? I love my Buzz..I actually own three. So I could always wait for the fire sale...and buy a few more!

 

[Rosco]

I have never seen or heard Mike mention a locking mechanism for any of the Notcig Pro PV's. Just load up on the existing Buzz's I guess. I don't collect PV's, but having a spare Buzz would suit me fine.

 

[BuzzKill]

I haven't noticed the wheel moving at all, seems to take a pretty conscious effort. The only wheel-related thing is that the paint line on the wheel itself came off pretty quickly, but then again I just rotate it "to taste" with whatever I'm vaping. Voltage, resistance, whatever meters don't matter to me, just more points of failure -- turn the wheel to get the vapor/hit you want, it only takes a couple puffs for a given carto/liquid to tune it in. Infinity has been really solid for me, including no issues with the occasional user abuse (drops onto floors -- it does roll well )

99% of the wheels are tight there will be a few that loosen up after a while , We found a new PAINT for the line ( YEP finger nail polish ! ) and it now lasts !
we are painting the new wheels with a green = lower , white = mid , red = higher lines for super easy eye settings .

 

[Ruppy]

Sooooo is the Pro done yet

 

[nbourbaki]

Tomorrow will be 3-5 weeks based on previous estimate. But I would be happy to be corrected.

 

[netbususer]

Tomorrow will be 3-5 weeks based on previous estimate. But I would be happy to be corrected.

Mike said on 05-05-2011 04:39 PM;

we are about 4 weeks out maybe 6 max .

So yeah... looks like we are three to five weeks out.

 

[PoliticallyIncorrect]

Mike said on 05-05-2011 04:39 PM;

So yeah... looks like we are three to five weeks out.

Not that we're hanging on your every word or marking dates down on calendars or anything, Mike. Relax.

 

[BuzzKill]

ok the Beta testing is still going on and the FINAL FINAL PCB's are one the way , also my FINAL FINAL Tubes are on the way , I have to match these up before I can place the 500 unit order for the Bizz Pro , this should take 10 day to do ( shipping etc,. ) THEN I will place my Order with my 2 suppliers , I have been quoted 20 days for delivery ( plus 5 days for shipping ) so 35 days is where I am at to get all of the parts in to us .

From there we will have to run a test production run say 10 units to work out production bugs ( maybe 3-5 days ) so really it is 40 days .

We are going to take our time to make sure the production is correct and the product is right .

 

[BuzzKill]

BTW I am vaping on a Infinity Pro prototype right now ! it is working GOOD , the battery life is much better , the top cap is 1,000% better , the tube is heavier and more robust and the threads are all good .

the Infinity Pro should be about 4 weeks behind the Buzz .

 

[Bovinia]

99% of the wheels are tight there will be a few that loosen up after a while , We found a new PAINT for the line ( YEP finger nail polish ! ) and it now lasts !
we are painting the new wheels with a green = lower , white = mid , red = higher lines for super easy eye settings .

LOL, I love that you used my idea!! And no charge...REALLY