Recently I purchased a black proveri with the 18650 extension cap. For two months, it has been well worth the money. However, two days ago I woke up, put a freshly charged battery in, and the device failed to fire. I did a automizer check and found that the atomizer was reading 1.3. After switching to a different attiy, the same thing happened. No firing, attiy reading at 1.3. I know the atties work, since I am using the same one on a different mod. I cleaned out the device the best I could, put a new battery in and it came back to life for about five minutes, then the same thing. Has anyone else experienced this? Is there something I can do to fix the problem? I emailed provape and haven't gotten a reply. I wouldn't be so pushy, but the proveri worked so well, I gave away my other two mods and am now vaping on an old blu. Thank you if you can help.
- Status
Try a higher resistance atomizer? I find that LR is NOT the way to go on a Provari... and have never even tried anything lower then 1.5Ω.
Every attiy is giving me a reading of 1.3, regardless of the actually resistance of it.
If you haven't already, you may want to read this thread: http://www.e-cigarette-forum.com/fo...e-getting-false-low-battery-flashing-led.html. Apparently there was an issue with overspray on some Provaris with the black extended cap (somewhere around post 50). There's also a good description on how to clean the Provari if you are experiencing problems.
ProVape is located on the west cost and they have been very busy lately. I would give them some time to respond.
I'm sure ProVape will contact you ASAP!
Do you have a digital multi meter?
If so, check the resistance of your atomizers with a meter.
I'm sure ProVape will contact you ASAP!
Do you have a digital multi meter?
If so, check the resistance of your atomizers with a meter.
Sounds like you have a internal short then, perhaps the atomiser connection point is damaged (rubber seal broken down?).
Good luck... as you know, overwhelming majority of Vari's are getting raves... I have 2 no issues. They are good CS...
this is why I am never never never without backups backups backups. I even have 2 chargers.
this is why I am never never never without backups backups backups. I even have 2 chargers.
Backups are good, god forbid any of us end up without chargers/batteries/atomisers and end up sucking on the evil analogs again.
I have a total of 9 batteries units, 4 chargers and about 80 ato/carto misers... And about 1.5 litres of juice
I ain't touching an analog again.
I have a total of 9 batteries units, 4 chargers and about 80 ato/carto misers... And about 1.5 litres of juice
I ain't touching an analog again.
Please read the above comments, check for over spray on the end cap or threads, did the atomizer post get moved accidentally? if this problem continues please send me a PM and we can figure out exactly what is going on!
Just to update...I did receive an email from provape after including my order number. Also, I cleaned out the PV with some rubbing alcohol. The unit seems to be working fine. Hopefully, it will continue. I want to make it known that provape did contact me with a willingness to resolve the issue.
Hubby has never had problems with his 2 ProVari's. Once a week, usually on saturday, I do spring cleaning on all of my mods, then apply fresh noalox to the threads. So far, it has kept all of them including mine, in tip top shape. I'm glad to hear ProVape got back to you. They are a great bunch of folks to deal with.
- Status
