RDA PSO Designed Mutation x V4 by Indulgence

Status
Not open for further replies.

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
47
All over the place
Just bought one. I was right about to buy an authentic N22 but I see this MX has some aspects of that plus a whole lot more. I don't know if it will be as cool as I think it looks, but I will see soon. Sure seems like a great deal for ~$30. Anyone else got one coming?


p.s. I checked to see if there was a thread on this atty but I didn't see one, so forgive me if it is one (or two).

image1.jpg


Product Features:
  • Multi-sized Angled Bottom Airflow
    • 1.5mm, 2.0mm, and 3.0mm
    • Airflow Controlled By Included Silicon Sealing Plug
  • Dual Parallelogram Side Airflow Array
    • 18 Total / 3 x 3 Array
    • 2mm Each
  • Bladed Angular Side Airflow Control
    • Single, Dual, or Fully Closed
  • 11mm Widebore Competition Drip Cap
    • Delrin Tip
  • Flush Heat Reducing Delrin 510 Adaptor Top Cap
  • Polycarbonate Chamber Extender Compatible With Either Top Cap
  • Deckmilled Negative Posts
    • 2mm Postholes
  • Split Positive Post
    • 2mm Postholes
  • 5mm Deep juice Well
  • Philips Screw Heads
  • Triple O-Ring Secured Base
  • 304 Stainless Steel
  • Available in Stainless Steel, Black, White, and Copper
  • Silver Plated Copper Connection
  • PEEK Insulators
  • Iconic Project Sub-Ohm™ Logo
  • Individually Serialized
  • 100% Designed, Engineered, and Developed in the USA solely by Project Sub-Ohm™

Product Includes:
  • Project Sub-Ohm™ Designed Mutation X V4 by Indulgence
  • Preinstalled 11mm Widebore Competition Drip Cap
  • Flush Heat Reducing Delrin 510 Adaptor Top Cap
  • Polycarbonate Chamber Extender
  • Silicon Bottom Airflow Sealing Plugs
  • Manual
  • Additional O-Rings, Screws, and Screwdriver
 

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
47
All over the place
Damn! Lucky duck you are!!!!!!! Mine was just sent today. I should have it by Monday or Tuesday. @cazmo, please let me know your reaction after you've gotten your mits on it!
I have one in the mailbox at home. 19 more minutes till I get off from work.

It's gotten real hard to imagine ever going back to paying big bucks on a dripper!
 

cazmo

Senior Member
Jul 9, 2010
70
39
55
Albuquerque, NM
Damn! Lucky duck you are!!!!!!! Mine was just sent today. I should have it by Monday or Tuesday. @cazmo, please let me know your reaction after you've gotten your mits on it!


It's gotten real hard to imagine ever going back to paying big bucks on a dripper!

This thing chucks the vapor like crazy and has an insane amount of air flow options. One thing I just learned a couple minutes ago. Be VERY careful of the fins that cover the side vents. Mine are very very sharp and I just gouged my thumb fairly deep while taking the plastic top cap off. This is my own fault as I noticed how sharp they were, but had a little juice on my hands, slip, ouch! I should have used a towel to grip it when changing the top cap.

Besides the sharp fins, I'm really liking this RDA. Hard to explain this, but this RDA feels so much more natural while taking hits than any other I own.
Machining is top notch, no machine oil. Vaped it right out of the box. It has a bit of iron taste, but I think that's my blood. ;)

One thing I am going to do is lightly sand down the sharp points of the fins. From what I can tell it won't effect airflow as the points sit lower than the air holes.
 

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
47
All over the place
I definately see a Mutation x V4 in my future. How's the flavor with it?

That's what I was wondering. But I bet with so many airflow options that you'd have, it may be a matter of just *finding* the right set-up. I don't see how this thing can't chuck whatever you want it to, whether it's flavor, vapor, or vapor and flavor.
 
  • Like
Reactions: rbferg

cazmo

Senior Member
Jul 9, 2010
70
39
55
Albuquerque, NM
That's what I was wondering. But I bet with so many airflow options that you'd have, it may be a matter of just *finding* the right set-up. I don't see how this thing can't chuck whatever you want it to, whether it's flavor, vapor, or vapor and flavor.

For flavor I found the best setup (for me) is close the side vents, and just use the bottom air flow. I've got mine set pretty tight just using the smallest of the two holes, and flavor is good. But also my taste buds even after 5 years of vaping are still trashed.
 

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
47
All over the place
For flavor I found the best setup (for me) is close the side vents, and just use the bottom air flow. I've got mine set pretty tight just using the smallest of the two holes, and flavor is good. But also my taste buds even after 5 years of vaping are still trashed.


I didn't know you could close off the side vents and just have the bottom open. Can you have all three bottom holes open with the sides closed, or just a couple?
 

McGarnagle

Senior Member
ECF Veteran
Verified Member
Feb 21, 2013
116
82
Cincinnati, OH
I have one and been using it for about 5 days. It's the best RDA I have owned (was using a Plume Veil prior to this one and had 5 others in the past). Fully open the airflow is massive. Too much for me. I normally close off 2/3 of the top airflow and leave the bottom open. Still creates big clouds and lots of flavor. The drip well is nice and deep. I have not had any leaking issues. Only condensation from all the vapor that sort of leaks out or if I blow out on the initial heat up. Building is pretty easy. I don't do anything too complicated. Just a typical dual coil but more complicated setups should not be too hard. It's a pretty standard setup in that respect. My only negatives are very minor. The cooling piece is just clear plastic. Besides being plastic (which of course would have issues with some juices) it looks pretty stupid. It does work and the vape is cooler, but it just makes the RDA look silly. The orings are a little thin and it doesn't hold the top very secure to the deck, but they work fine. If anyone has any other questions let me know. Overall it's great, especially for around $30.
 
  • Like
Reactions: cliff87
Status
Not open for further replies.

Users who are viewing this thread