Putting liquid into Mini

[BigBuxNoWhammy]

My brother has a smartfixx mini, and we can't really figure out how to get liquid in it. When you put liquid in, it just pulls through into your mouth. Is there a special way you have to do it? Or are these things just not very good and there's no way to properly do it?

 

[CaSHMeRe]

drip straight on the atomizer. Pull the cartridge out, drip 1-3 drops on the atomizer, and puff away.

 

[BigBuxNoWhammy]

So you can't do it with the cartridges with these?

 

[vapors]

I think you are overfilling it. They can't hold much. 3-4 drops max will do it.

 

[CaSHMeRe]

you can do it with the cartridges, or just by dripping. Like vapors said, only use a few drops. Anything more will flood it and that may be the reason you are getting it in your mouth!

 

[dnakr]

If it is flooded - take the cartridge out and unscrew from the battery. Turn the atomizer upside down and blow into the end that connects with the battery. Any excess liquid will be blown out (use a napkin or something to catch the e-liquid) - then put a dummy mouth piece on and e-smoke until the smoke weakens - then put back in a cartridge and e-smoke away.

 

[BigBuxNoWhammy]

I did only put a few drops. I put like 2-3 max. :S

 

[trog100]

its poor design.. the eicig.com mini is very bad in this respect.. a pipe is the best.. he he he

the pent style and 901 are good.. the smaller and shorter they try and make these things the worse they get..

trog

 

[leaford]

You need to either use a syringe to inject the liquid to the bottom of the cartridge, or pop the cartridge out of the mouthpiece by pushing a paperclip through the airhole, then dripping liquid into the cat. You can push it back into the mouthpiece using the little rubber plug that comes with the cartgridge/mouthpiece combo.

 

[BigBuxNoWhammy]

You need to either use a syringe to inject the liquid to the bottom of the cartridge, or pop the cartridge out of the mouthpiece by pushing a paperclip through the airhole, then dripping liquid into the cat. You can push it back into the mouthpiece using the little rubber plug that comes with the cartgridge/mouthpiece combo.

But, injecting the liquid to the bottom of the cartridge, wouldnt that make it MORE likely to have liquid come through? If the liquid is closer to the hole?


PS - I just came across your video of your 5 fav e-cigs on youtube! haha. Good video. I wish you had the kissbox there for me to see though, cause I think I may order one.

 

[leaford]

But, injecting the liquid to the bottom of the cartridge, wouldnt that make it MORE likely to have liquid come through? If the liquid is closer to the hole?


PS - I just came across your video of your 5 fav e-cigs on youtube! haha. Good video. I wish you had the kissbox there for me to see though, cause I think I may order one.

Thanks. I'd meant to do the KB video for a while now, but I decided to wait until I got one from the latest production batch. I'm testing it out now, and will do a demo soon, with a review to follow.

On the smartfixx cartridges, the actual cartridge is a small tube inside the mouthpiece. If you look inside you cn see it. That tube has a bottom. Unless you force the needle to puncture the bottom, you'll be fine. Just don't inject too much and overflow the tube.

Also, you can always blow through the mouthpiece hard and blow out any loose droplets.