question about batteries
- Thread starter Krewlife
- Start date
- th_trl_thread_readers 0
- Status
Which mech do you have? Some require one or the other. Most should allow both kinds.
Sent from my SM-N900T using Tapatalk
Sent from my SM-N900T using Tapatalk
All the mech mods I have will use both.
Just in case you don't know, make sure the batteries are not ICR li-ion chemistry, typically protected cells. You need IMR high drain or hybrid with high enough maximum amp limit to allow safe vaping at the current draw of your coil.
Vape on!
Just in case you don't know, make sure the batteries are not ICR li-ion chemistry, typically protected cells. You need IMR high drain or hybrid with high enough maximum amp limit to allow safe vaping at the current draw of your coil.
Vape on!
That all depends on what atomizer you will be building on and what resistances you want to achieve. You can use the ohms law calculator to calculate the current required for target resistances and add a few amps for headroom and that should tell you the current range. Here are some battery info links from one of our battery experts. Good luck.
http://guidetovaping.com/2012/02/28/ecigs-mods-batteries-and-safe-vaping/
http://www.e-cigarette-forum.com/fo...eeper-understanding-mod-batteries-part-i.html
http://www.e-cigarette-forum.com/fo...4690-protected-batteries-vs-imr-safety-5.html
What exactly does "IMR" mean?
http://www.e-cigarette-forum.com/fo...-discussion-safety-battery-info-warnings.html
Battery Data | Deus Ex Vaporis
https://www.commonsenserc.com/page.php?page=c_ratings_explained.html
http://guidetovaping.com/2012/02/28/ecigs-mods-batteries-and-safe-vaping/
http://www.e-cigarette-forum.com/fo...eeper-understanding-mod-batteries-part-i.html
http://www.e-cigarette-forum.com/fo...4690-protected-batteries-vs-imr-safety-5.html
What exactly does "IMR" mean?
http://www.e-cigarette-forum.com/fo...-discussion-safety-battery-info-warnings.html
Battery Data | Deus Ex Vaporis
https://www.commonsenserc.com/page.php?page=c_ratings_explained.html
use what the manufacture says , i have been a fan of AW brand for over 2yrs now but just got some orbtronic that blow the AW's away
BATTERIES
BATTERIES
thanks for the fast replies guys! i don't plan on going below 1ohm i was planning on getting this batterey for my mech
SONY US18650VTC4 2100mAh HIGH DRAIN 30A RECHARGEABLE Li-on 18650 Battery
SONY US18650VTC4 2100mAh HIGH DRAIN 30A RECHARGEABLE Li-on 18650 Battery
I use those in my mech mods. You should be fine even going sub ohms.
Sent from my cotton stuffed microcoiled Android unit.
where do you buy yours at? i was going to buy mine at bevapehappy.com but they are sold out at the moment :/
I got mine from 101vape but they are out of stock now too. Keep searching as those batteries sell out fast.
I just got a couple of those and like them. IMO, they are one of the safest batteries around
ok my battery question
I have a pair of the Panasonic NCR18650PD batterys that so far I have only used in my vamo
Are these ok in a mech with toppers that never go below 1.2 ohms? I have never been real sure what the chemistry of these are which is why I don't put them in the mechs.
I have a pair of the Panasonic NCR18650PD batterys that so far I have only used in my vamo
Are these ok in a mech with toppers that never go below 1.2 ohms? I have never been real sure what the chemistry of these are which is why I don't put them in the mechs.
Those are hybrid chemistry and are considered one of the safest around. You should be fine using those up to 10A rating so 1.2 ohms is no problem.
Ty much that opens up 2 more batterys for the devices I actually use these days woooohoooooo!
To follow up on Paul.K's reply, they should be safe down to .6Ω (7 amp draw). Though they're rated for 10 amp continuous discharge, I like to stay well within 80% of the limit. For safety's sake.
- Status
Similar threads
