I recently just got the new provape
mod from provape.com
I use cartomizers from vapor4life
I have an 801/901 adapter from thagbuilt.com for my little chuck
Can I use this adapter with the provape mod? I can't seem to get it to screw on?
Or do I need a different adapter to use it? I'm lost when it comes to adapters. ANy help would be greatly appreciated.
Let's get you unlost ;-)
First, the term 'adapter' is being used in two different ways unfortunately. When a mod is made to use with a 510, for example, some vendors say this as it having a "510 adapter". And what this means is that the battery connection (a better description, imo) is for the 510 atomizer. It is a fixed connection.
Then there's actual 'adapters' that despite what the battery connection on the mod might be, they can be used to change the connection to some other atomizer. How they do that, is that they have one side of the adapter that has the 510 threads (as in the example above) and on the other side, it has the threads for some other atomizer - a 901,801, cartomizer, 400 or something else.
So, first you need to know what type of 'battery connection' that came with the provape 1 - check your invoice if you don't know - (they call it 'adapter'). Your choice was either a 510 or 901.
IF you got the 510 connector, then you need a "510 to Cartomizer" adapter if you want to use Cartomizers on your provape 1. And it is likely that the adapter that you have for the Chuck is Not going to fit - whether it's a battery connector or adapter.
If you got the 901 connector, then you need a "901 to Cartomizer" adapter to run Cartomizers on the provape 1. And again, it is unlikely that the connector/adapter from the Chuck will work.
So, you can go here:
Adapters
If you have the 510 connection on the provape 1 choose this one:
510 to Cartomizer Adapter
If you have the 901 connection on the provape:
CARTOMIZER ADAPTERS fo 901 Tips
There are other vendors that carry these.
Any questions, PM me.
