Question...

[NightNurse]

I know that some people drip directly into the carto by leaving the o-ring/cap off, and then putting the cart condom with a hole cut in the middle back on the cart to vape... my question is, does someone make an attachment like that? Something that's more of a mouthpiece that just slips over the end of the carto that can be removed/replaced easily in order to drip?

Thanks

 

[doots]

Hi Night.
a 510 cart will slip into the carto. isnt a tight fit but works fine for me.

 

[Twister]

A 901 or a 510 mouthpiece will fit into the carto. An 801 mouth piece will fit over the end of the carto.

I know that some people drip directly into the carto by leaving the o-ring/cap off, and then putting the cart condom with a hole cut in the middle back on the cart to vape... my question is, does someone make an attachment like that? Something that's more of a mouthpiece that just slips over the end of the carto that can be removed/replaced easily in order to drip?

Thanks

 

[WitchWay]

I use a 901 flat tip on my cartos and have some 801 soft tips on order to try. The 901 fits inside, but isn't completely tight. The 801 goes over and is suppose to be tighter. I'll have to report after I get mine and let everybody know.

 

[MrHyde]

I'm sure with a little tape to make the 901 cart thicker would work to make it fit tighter.

 

[LukeNM]

I gently bend the end of the carto with pliers making it slightly out-of-round to make the 510 cart fit tighter. I also snip off about 1/8 of an inch from the bottom of the 510 cart with scissors so it does not go down quite as far into the carto.

 

[WitchWay]

I'm sure with a little tape to make the 901 cart thicker would work to make it fit tighter.

They are tight enough to vape without a problem, but they get knocked off easily, especially when I put my setup in my pocket.

I gently bend the end of the carto with pliers making it slightly out-of-round to make the 510 cart fit tighter. I also snip off about 1/4 of an inch from the bottom of the 510 cart with scissors so it does not go down quite as far into the carto.

Yes, good tip, I cut some off the 901s too so they are not all the way down.

I'm anxious to get the 801 tips to try. They are suppose to be soft tips. I ordered from China, they shipped Monday, were in customs in San Fran on Friday so hope they are here on Monday or Tuesday.

 

[MrHyde]

They are tight enough to vape without a problem, but they get knocked off easily, especially when I put my setup in my pocket.

Hmm, I'd think you would loose flavor or vapor due to air leakage o.o

 

[WitchWay]

Hmm, I'd think you would loose flavor or vapor due to air leakage o.o

I don't think there is air leakage. I don't notice any and definitely no loss of vapor or flavor. The 901s fit snug, but I guess I'm not gentle and tend to knock them off. The 801s are suppose to go over instead of inside and have a tighter fit.

I just know I prefer the flat tip feel in my mouth over the hard round feel of the carto itself. The only thing I don't like is that it adds 7/8 of an inch in length. I've gotten use to it on the Bartleby and my shortie, but I got an XL yesterday and with the added length that thing is really long.

 

[MrHyde]

I don't think there is air leakage. I don't notice any and definitely no loss of vapor or flavor. The 901s fit snug, but I guess I'm not gentle and tend to knock them off. The 801s are suppose to go over instead of inside and have a tighter fit.

I just know I prefer the flat tip feel in my mouth over the hard round feel of the carto itself. The only thing I don't like is that it adds 7/8 of an inch in length. I've gotten use to it on the Bartleby and my shortie, but I got an XL yesterday and with the added length that thing is really long.

I got an KR8 battery to 510 atty adapter to test out juices and put it on my XL just for fun...hah, it was so long. Not a 2 piece, not a 3 piece, but a 4 piece super long xP

Personally, I just tailpipe my cartoz when topping off like that and only while at my desk. About time to clean these things out after a week of me switching between only 3 actual cartoz lol

 

[NightNurse]

I use a 901 flat tip on my cartos and have some 801 soft tips on order to try. The 901 fits inside, but isn't completely tight. The 801 goes over and is suppose to be tighter. I'll have to report after I get mine and let everybody know.

Do you have a link to where you ordered them from? Thank u..

 

[WitchWay]

Do you have a link to where you ordered them from? Thank u..

The 901s I bought off someone here in the Classifieds and Swaps section. The 801s I ordered from healthcabin.com in China, but I'm sure there are US sellers that have them. Just ask to make sure they are soft tips. I'm not sure if there are different types or not on the 801s. I just went on a recommendation from a friend.

 

[jebey29]

I know that some people drip directly into the carto by leaving the o-ring/cap off, and then putting the cart condom with a hole cut in the middle back on the cart to vape... my question is, does someone make an attachment like that? Something that's more of a mouthpiece that just slips over the end of the carto that can be removed/replaced easily in order to drip?

Thanks

Its really not cumbersome at all. Its just one step of removing the condom, dripping and then putting back on.

The cumbersome part is making 25/30 holes in the condoms so you can drip in the cartos.

 

[LukeNM]

I gently bend the end of the carto with pliers making it slightly out-of-round to make the 510 cart fit tighter. I also snip off about 1/8 of an inch from the bottom of the 510 cart with scissors so it does not go down quite as far into the carto.

Quoting my own post

I was stretched out on the sofa watching TV, vaping, last night and could not get a good angle on the carto, after taking the 510 tip off, to drip in it without getting e-juice down the center hole. So, I dripped about 7 drops into the empty 510 cart (tip) reservoir, inverted the e-cig, put the 510 cart back on and spun the e-cig as I brought it back over and it appears the e-liquid ran down the inside edges of the carto, into the filler, without getting any e-juice into the center hole. I then vaped away without having to adjust my sitting position… I guess sometimes laziness is the mother of invention.

 

[bornagainst]

I cut a hole into the condom, and place it on the end, after removing the plastic cap and rubber stopper. Vape this way...easy to tell when you are empty.

 

[rocks82]

I cut a hole into the condom, and place it on the end, after removing the plastic cap and rubber stopper. Vape this way...easy to tell when you are empty.

ooh! good tip! complete with pictures for people like me!

btw, i love the ever-evolving bornagainst facial hair