Looks to me like another cloudchaser. Anymore info on this or is it only going to be released at ECC?
RDA Round-Table Discussion and Lookout
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
Only other thing I've seen is this just a few min ago. Haven't looked into it but looks pretty tight lipped til ECC.
Funny u talk about rip and Claptons. I just watched his video on them for my MxV4 lol
Sent from my SPH-L710 using Tapatalk
I was literally about to say the same thing! Lol. I like it but my god that air flow is insane!
Sent from my VS986 using Tapatalk
Ya I only have used it at home. And chain it. So, haven't had much issues. I did tho leak bad and got all over my hands, under the sleeve on the vt. WAS very annoying. I can see that being frustrating.
Sent from my SPH-L710 using Tapatalk
@Michigan Chucker
Hey fellow gander! Good to see another around these parts. What area are you in? What shops do you go to?
Leaking doesn't bother me a ton when I am vaping because I can tend to it, but the issue I have--that REALLY irks me--is when I have leaking while the atty is left alone and especially on regulated devices where leaking can kill circuits! I doubt I am the only one that has had a mod rendered useless because of leaking. And that there folks is how leaking can cost $$$!
Last edited:
Hey hey! I'm New here, and loving it.
I live in port huron. The two shops I go to, one is in Richmond. Buffalo bills. Not so much there, but on occasion. The main one is Mr. Vapor. Really close to my house lol.
What about you?
Well its kinda bitter sweet... as I was just watching and reading reviews about some other rdas. (Looking for competition worthy
+ quad coiling would be awesome) ..and my mutation leaked :/ my hands are sticky, the barrels tacky, im not so happy right now lolAnd I think I need to re do my coils. :/
HOW'S YOUR NIGHT lol
Sent from my SPH-L710 using Tapatalk
Hey hey! I'm New here, and loving it.
I live in port huron. The two shops I go to, one is in Richmond. Buffalo bills. Not so much there, but on occasion. The main one is Mr. Vapor. Really close to my house lol.
What about you?
Well its kinda bitter sweet... as I was just watching and reading reviews about some other rdas. (Looking for competition worthy
And I think I need to re do my coils. :/
HOW'S YOUR NIGHT lol
Sent from my SPH-L710 using Tapatalk
All is well here. In Mount Clemens these days, so just a ways down on I-94. We got a few vape shops around here with the best one, Vapor Craft, in Clawson. For quads, if your building is up to snuff, I would recommend the 454 Big Block v2 (or even the v1 sans the drip tip if you're looking for massive clouds). It doesn't have the airflow you think would be required for chucking (and it may be a tad too tight for you), but it sure as hell can do it and it does it with a heft in the flavor department. That's why I like it. Clouds, to me, just require adequate airflow or drilling-out of barrels, but flavor is more of an engineering/design approach and is not standard in most chuckers. Maybe it's not for you though? Dunno.
Last edited:
Ah ya not far at all. My ex worked at the hospital there just past Meijers. (Can't think of street) hmm maybe I'll come check out the stores down there this weekend.
Well, considering I just started vaping about a week ago. Bought evic vt. Because had ability to be upgradeable. But not over the top. Yet
I have been doing custom car audio systems since I was about 13. & competing in mi, oh, indy,. Etc..I love to build my own things. And this I knew would be a addiction. So 3 days later, bought a Mutation x v4. It's meh. Should've waited and did more research. BUT I do like it. Just need to practice more coil building. So Ya, can't do quad. Yet but I love a challenge and to be, even at least a little, outside of normal.
Which is why I found this site. (Starting to blab lol Ima ....)
Sent from my SPH-L710 using Tapatalk
Well, considering I just started vaping about a week ago. Bought evic vt. Because had ability to be upgradeable. But not over the top. Yet
I have been doing custom car audio systems since I was about 13. & competing in mi, oh, indy,. Etc..I love to build my own things. And this I knew would be a addiction. So 3 days later, bought a Mutation x v4. It's meh. Should've waited and did more research. BUT I do like it. Just need to practice more coil building. So Ya, can't do quad. Yet
but I love a challenge and to be, even at least a little, outside of normal. Which is why I found this site. (Starting to blab lol Ima ....)
Sent from my SPH-L710 using Tapatalk
Also. I do have a little confusion with how "airy" this rda can be. I've been thinking it might just be cause my mod isn't able to make it shine but Idk. I actually have a few, maybe stupid questions. Just haven't focused enough yet to make the threads lol.
But ha I like flavour also! But with that said, I'm ok with having a tank for that.(will say tho, this mxv4 with lower afc open and top closed, I get nice flavor) Thinking tfv4 or w,e it's called. And use rda just for clouds, chucking.
Sent from my SPH-L710 using Tapatalk
But ha I like flavour also! But with that said, I'm ok with having a tank for that.(will say tho, this mxv4 with lower afc open and top closed, I get nice flavor) Thinking tfv4 or w,e it's called. And use rda just for clouds, chucking.
Sent from my SPH-L710 using Tapatalk
That thing looks really nice, I wonder if it has adjustable airflow. Reminds a lot of the tugboat, kinda like a tugboat v3 with crazy airflow.
thanks mann! hobo working great with dual claptons (went dual to lower the resistance and have better mass) the ramp up time is a bit longer than my previous build but works really great for long pulls
ECC and other events like it are why I work on my vape tricks everyday lol. I have a young face... and I want to go to these meets and sell my soul for some free juice dammit!!
First and foremost though, I'm working on being as good as people who are already sponsored, so it really is a labor of love.
Well the STRO mini 2 is already here. I didn't like the first version but I think they totally ruined it by adding bottom air flow. Cheap atty+ bottom air flow= crap.
Sent from my VS986 using Tapatalk
Sent from my VS986 using Tapatalk
What Mr Mann said a page back was DAMN TRUE. Non inovative standard cloud chuckers will continue to sell because that seems be what EVERYONE thinks is so great at most shops. Not a lot, (barely any actually) of vapers feel the way we do in this thread about atties. Im all over shops and I hear the same praises for generic crap.
The way I look at it is, no matter what an atty has or what we think of it as far as innovation there gonna sell, period. Prime example is the tugboat and dinghy. There basic as hell yet they sell like hot cakes. And what a lot of companies do is come out with 1 atty and then come out with a 2nd revision right after of the 1st and change minor things or make it smaller and BOOM they sell cause everyone always wants the next best or newest thing. It works with phones and tv's.
Sent from my VS986 using Tapatalk
Sent from my VS986 using Tapatalk
In my area its all about the hype. I don't know how many times I tried to tell a shop owner that I hang out with what the new cool innovations are, they are always concerned on what is selling and what is going to sell. Then 2 months down the road will start selling the innovative item I told them about because it is, in fact, living up to its hype late in the game.
The derringer for instance, I took into the shop a day after i got it. Nobody understood it, why it was so small, why there was "no airflow". The mutation Xv2 was the hot item. 2 weeks later i walk in and everyone has a derringer claiming it's the best thing since sliced bread. I just smh.
For anyone interested the LowProDripper is up for holding, or pre order whichever you wanna call it. Let me know and I'll post the Google doc for it.
Sent from my VS986 using Tapatalk
Sent from my VS986 using Tapatalk
- Status
Similar threads
