RDA Round-Table Discussion and Lookout

[jhhollier]

I was tempted by the Subzero after Mr.Mann posted about it a couple months ago but I think it would be lost on me. I'm not going to rock a .2 build at 130W. Not even close. It just seems like way too much airflow for the builds I use.

I like the idea of the Goon's posts but I worry that it might be like the Hobo 3.1's locking barrel: great in theory not so much in application. Also seems too open for me.

 

[Mr.Mann]

I was tempted by the Subzero after Mr.Mann posted about it a couple months ago but I think it would be lost on me. I'm not going to rock a .2 build at 130W. Not even close. It just seems like way too much airflow for the builds I use.

I like the idea of the Goon's posts but I worry that it might be like the Hobo 3.1's locking barrel: great in theory not so much in application. Also seems too open for me.

I can't go to 130w either, but at 80-90w, I am set! I have done some .5Ω builds on it and run it at about 60-70w with no real drop off, but I am sure that may even still be considered high.

Edit: It can also run in single coil mode too, and it does quite well. But I get that this atomizer ain't for everyone (not that any ever are).

 

[jhhollier]

I can't go to 130w either, but at 80-90w, I am set! I have done some .5Ω builds on it and run it at about 60-70w with no real drop off, but I am sure that may even still be considered high.

60-70 is fine and even 80-90 on a rare occasion but the 40-45 range is where I usually hang. I guess that's why I love the NarDA, Pancake, Hobo 3.1, Snapdragon and Viper V2. They all perform well near or below that range. I would like one atty that is a little more fiesty and needs more power but at the moment that would probably be the Velocity V2 for me.

 

[fishwater]

Does anyone have an idea when the NoPitty will be available? I'm not on facebook but understand vapinart will be (eventually) getting some. This one is hitting all my buttons, can't wait to get my hands on one.

 

[jhhollier]

Does anyone have an idea when the NoPitty will be available? I'm not on facebook but understand vapinart will be (eventually) getting some. This one is hitting all my buttons, can't wait to get my hands on one.

If I see a post about it I'll share it here.

 

[fishwater]

If I see a post about it I'll share it here.

Awesome, thank you, I appreciate it.

 

[Tom Forde]

I was in the whole Goon vs SOISZ24 debate up until yesterday. I ended up ordering a black SOISZ24 based on a few reasons:
1) I have a SubZero mod and it just makes sense.
2) Been trying to figure out which to get since each was announced
3) Angry logic. I entered the Goon Buildoff on Instagram & I believe I had a solid shot at winning one of the 3 spots in tier1. The contest was split into 3 tiers & tier1 was 1-999 followers on Instagram. I got beat by 2 people with over 1000 followers (which would have been tier2). One of them I didn't care because I'm friends with him & he had 992 followers at time of entry. The other had over 1k & now has over 1200, 1190 as of yesterday. However I didn't win & lost to a person that should have been in tier2 which is 1000-(X) followers.
So angry logic dictated that if my build wasn't good enough for his atty, his atty isn't good enough for my money! Lol. Btw, this was my entry build:
One of the winners builds was a similar wrap to the right Tsuka coil, but with completely different cores. I'm not mad anymore though & I'll probably pick up a goon in good time.

 

[inswva]

Does anyone have an idea when the NoPitty will be available? I'm not on facebook but understand vapinart will be (eventually) getting some. This one is hitting all my buttons, can't wait to get my hands on one.

Production was delayed by a week or so due to machine problems. Mine should be shipping tomorrow or the next day. I'd expect Vapinart will have theirs before too long.

 

[Mr.Mann]

60-70 is fine and even 80-90 on a rare occasion but the 40-45 range is where I usually hang. I guess that's why I love the NarDA, Pancake, Hobo 3.1, Snapdragon and Viper V2. They all perform well near or below that range. I would like one atty that is a little more fiesty and needs more power but at the moment that would probably be the Velocity V2 for me.

I really think you will like the NoPity. I LOVE it because I've been wanting to return to lower wattage dripping. It had gotten to a point that I couldn't vape with RDAs until late in the evening--ripping massive hot hits was too much for the early day. Now I can vape with my rda at 40 watts on a Mini Volt until the battery dies, then it's time to step it up (to another atty that has more bite!).

 

[mycarsifarst]

...It had gotten to a point that I couldn't vape with RDAs until late in the evening--ripping massive hot hits was too much for the early day...

Huge rips are the only way to start the day, especially sitting on the throne.

 

[Mr.Mann]

Huge rips are the only way to start the day, especially sitting on the throne.

I will ALWAYS start the day with an eGo-C Twist and a bridged 510 Cisco Spec atty with 24 mg/mL! TH, that's how I start my day. And, yeah, while taking a whizz!

 

[HeiSINberg]

Forgot to post this yesterday. Ruthless ejuice is releasing an rda soon. Only 1,000 pieces made.

Sent from my SM-G925V using Tapatalk

 

[Sed8op8]

Does anyone have an idea when the NoPitty will be available? I'm not on facebook but understand vapinart will be (eventually) getting some. This one is hitting all my buttons, can't wait to get my hands on one.

I'm right there with you as soon as I saw that build deck I knew I must have it straight gollum Lord of the Rings my precious , one RDA to rule them all and in the cloudiness bind them haha not really I have found out by now that there isn't an "end game" the newest shiniest thing is my end game and I have made my leave with that ! I mean I Could be shooting .......... Money wise its a close thing but in the end having a mean case of G.A.S gear acquisition syndrome keeps me happy and cigarette free

 

[Atlantisboy]

Good afternoon folks, I am trying to find a bottom feed pin for my Hobo 3.1 but having no luck. Can anyone help please?Thanks.

 

[Sed8op8]

Forgot to post this yesterday. Ruthless ejuice is releasing an rda soon. Only 1,000 pieces made.

Sent from my SM-G925V using Tapatalk

Oh wow I have never heard of ruthless before.... As far as 4 posts go I think the drifter is going to be m next one but it looks nice what do you guys think...?

 

[Sed8op8]

Good afternoon folks, I am trying to find a bottom feed pin for my Hobo 3.1 but having no luck. Can anyone help please?Thanks.

@ Atlantisboy
You and me both the Narda one is sold out I am waiting for an email back from them concerning restock and will let you know if I find another option good luck in your search

 

[Atlantisboy]

@ Atlantisboy
You and me both the Narda one is sold out I am waiting for an email back from them concerning restock and will let you know if I find another option good luck in your search

Thank you, I will let you know if I have any luck too

 

[Uncletattoowhat]

From a quick google search, it's available for pre-order (Netherlands) here NoPity by NoName Mods With a note stating *ETA: End of March 2016. Limited quantities, Pre-Order now!

 

[HeiSINberg]

Oh wow I have never heard of ruthless before.... As far as 4 posts go I think the drifter is going to be m next one but it looks nice what do you guys think...?

They make some pretty good juice, but as far as this goes, it's nice but I'm not getting it. I mostly just post what I find for the people that aren't on instagram or Facebook.

Sent from my SM-G925V using Tapatalk

 

[Mr.Mann]

Oh wow I have never heard of ruthless before.... As far as 4 posts go I think the drifter is going to be m next one but it looks nice what do you guys think...?

Looks like a good RDA, but it doesn't quite look different enough from countless others. Anyone know the price tag?