Recommend me a Tank and coils.

[UncLeJunkLe]

Did you do any research on it?

 

[UncLeJunkLe]

You coulda had a tried and true xtar charger for like $2 more.

 

[Twiggy1995]

didn't buy it yet, so I will take a look at that.

 

[UncLeJunkLe]

Look for the XTAR VC2 or VC4 (not VC2s or VC4s).

batteries and chargers are not something you want to by off-brand just to save a few bucks or gain an extra bay. There's a lot of dangerous junk out there when it comes to batteries and chargers.

 

[Twiggy1995]

hmm, yeah the vc2 is $15, but it only has 2 slots, the vc4 has 4, but it's $35, just a couple dollars less than the one I need to wait until later to buy.

I need a 3 slot at minimum.

 

[UncLeJunkLe]

Buy from Fasttech and charge in your mod (like you said) while you wait for it.

$18.76 Authentic XTAR VC4 4 Slots Li-ion Ni-MH Premium USB Battery Charger - 4*0.5A / 2*1A at FastTech - Free Shipping

 

[Twiggy1995]

if it was $15, I'd buy it now, but since it is $35 (from fasttech) I'd need to wait to buy it even from fasttech.

Edit: Never mind, it's $18, I just somehow found something with the same name that was $35 for some reason lol.

Before I hit "buy", this it?

$18.76 Authentic XTAR VC4 4 Slots Li-ion Ni-MH Premium USB Battery Charger - 4*0.5A / 2*1A at FastTech - Free Shipping

 

[Katya]

if it was $15, I'd buy it now, but since it is $35 (from fasttech) I'd need to wait to buy it even from fasttech.

Edit: Never mind, it's $18, I just somehow found something with the same name that was $35 for some reason lol.

Before I hit "buy", this it?

$18.76 Authentic XTAR VC4 4 Slots Li-ion Ni-MH Premium USB Battery Charger - 4*0.5A / 2*1A at FastTech - Free Shipping

Yup.

 

[Katya]

I know that it's not recommended to do this, but for about two weeks until I get more green, could I get away with charging the batteries inside the mod, assuming I don't leave it over night, and am attentive?

I mean I am almost always by the computer anyways, so I can notice when they are getting to 90%+ charged. From what I understand the problem is leaving them charging inside mods, after they are already full?

Given I am an occasional/light vaper, for a 3 battery mod, I probably won't have to recharge very much anyways. I didn't even vape at all yesterday, and haven't yet today.

How are you going to charge your batteries? Do you have a wall adapter?

 

[Twiggy1995]

How are you going to charge your batteries? Do you have a wall adapter?

Just connect it to my computer, but yeah I have wall adapters too, mostly meant for phones and other devices like that though.

 

[Twiggy1995]

charger purchased.

Tank and batteries also purchased.

Decided to go with Sony Batteries because that's certainly a safe brand to go with.

 

[Katya]

Just connect it to my computer, but yeah I have wall adapters too, mostly meant for phones and other devices like that though.

I would use a wall adapter. I believe it's safer. Not to protect your mod, but to protect your computer. Those cell phone or tablet wall warts are perfectly fine (1A or 2A) for charging your mods.

Good luck!

 

[Seiggy]

A couple of other USB based charge related devices of note:
Xtar V101 USB Current/Voltage Detector to see what is actually being drawn from your USB power source.
Xtar U1 Six-U 45W 6-Port USB Charger Hub give you six 2.4A USB power ports

There are others that are out on the market, but I'm using both the above on a regular basis for phones, power banks, chargers and mods.

 

[Freemax_Jerry]

Hello,

I just bought a Cuboid 200, (200W) Mod, because it looks very elegant, I heard is pretty good, and suited all my needs of having Temperature Control, a 510 connection, and can do up to 200W. Which is a great upgrade from the Smok Novo I currently have.

@Mordacai suggested that I get a Freemax Twsiter 30w starter kit as well, and I already confirmed that the Fireluke 22 tank it comes with being a 22ml tank will fit on the Cuboid as well.

Unfortunately, I am having trouble finding a Twsiter 30w kit (only see the 80w version) from any source in Canada.

So in the mean time, can anyone recommend me a tank to get that will fit the Cuboid 200W without over hang (I heard from a review that it looks best with 22mm tanks, and 24mm or larger tanks will have overhang), and work well with it? Maybe specific coils for said tank as well?

I am mainly looking for good flavor, but good cloud would be a benefit.

P.S: If anyone knows where to find a Twister 30w kit within Canada, that'd be good to know as well.

P.S.S

I did just find freemax.com and they are selling it for $46.99, but the only shipping option that doesn't take a long ... time (20-40 days) costs $30, so that raises the price substantially, to the point where I am questioning if it'll make financial sense, and if maybe I am still better off just buying a tank and coils, from a local store, if they carry it.

So sorry about the delay for replying to you. Please visit Freemax website to find the page of gobal partners, you will find our Canada clients. Because of the forum rules, I cannot post the link here.
Twister 30W Kit is $46.99 on Freemax online vape store. Once the order is over $40, customers can enjoy the free shipment. If customers choose DHL for $30, it can arrive in 5-7 days.

 

[Twiggy1995]

Just came in today;

- Aspire Nautilus X
- 3 Sony 18650 batteries

The 6 on each battery box making "666" was a nice touch lol.

Gave me some free candies, and free e-liquid.

The e-liquid is "Monkey Breath" by them, 30ml. Unfortunately for me though I don't use nicotine and this has 6mg.

The thought was still nice of course.

 

[TrollDragon]

Don't expect a properly working or even remotely functional TC from that Cuboid. iJoy has absolutely no idea of how TC is supposed to work. The Cuboid 150 was the last bit of money Joyetech ever received from me, they might have attempted to fix the firmware with the 200 but I highly doubt it. All of the problems we pointed out to them with the 150 were totally ignored.

Good luck though.

 

[Twiggy1995]

Don't expect a properly working or even remotely functional TC from that Cuboid. iJoy has absolutely no idea of how TC is supposed to work. The Cuboid 150 was the last bit of money Joyetech ever received from me, they might have attempted to fix the firmware with the 200 but I highly doubt it. All of the problems we pointed out to them with the 150 were totally ignored.

Good luck though.

Well, this will be only my second vape device ever, and I got it on a massive 80% store closing sale, so even if that is the case it's not a big deal.

I was recommended to try TC, but I don't know if it's for me, as I never even used it once before.

 

[TrollDragon]

Well, this will be only my second vape device ever, and I got it on a massive 80% store closing sale, so even if that is the case it's not a big deal.

I was recommended to try TC, but I don't know if it's for me, as I never even used it once before.

Many people will have a really bad first experience with TC because of an improperly working device and write off TC as something that's not for them. TC can be an excellent vape on a device that implements it properly like Evolv's DNA, Dicodes or top end YiHi mods. Either way, wattage mode works quite well on the Cuboid and you don't require TC compatible coils to use it.