Reo Grand VV heads up please

Status
Not open for further replies.

CaptSteve

Airborn ECF Guru
ECF Veteran
Verified Member
Nov 20, 2011
14,537
40,523
41,000ft at M 0.85
Hey Reonauts just need your help with my Reo Grand VV. I'm using it with dual 18350's and I'm noticing that overnight when not in use there is battery drainage. Is this something normal with the Grand VV or has mine some sort of problem. I'll tell you that the only thing I've done to it is change out the spring for the upgraded spring. Everything else is bone stock.
BTW I don't put the on/off switch to off overnight if this makes any difference.
Thanks
Steve
 

CaptSteve

Airborn ECF Guru
ECF Veteran
Verified Member
Nov 20, 2011
14,537
40,523
41,000ft at M 0.85
I have an RM2 on it and what I did to test it is I put a fresh set of 18350's in it and placed my multimeter on the two posts of the RM2 without firing the button and it shows zero volts so it certainly doesn't look like there's a voltage release/leak.
Just doesn't make sense how there is a battery drain
 

CaptSteve

Airborn ECF Guru
ECF Veteran
Verified Member
Nov 20, 2011
14,537
40,523
41,000ft at M 0.85
Thanks for that, I knew it was notcigs board but didn't know about the drain. Button going to off overnight.

The chip that Rob used from notcigs was known for draining some overnight. I believe that is why there was an on/off switch on them. If memory serves me correctly even the Boggers drained when not in use also...
 

MamaTried

Resting In Peace
ECF Veteran
Verified Member
May 31, 2013
7,404
48,068
Northern California
My VVW seems to not have this issue. It's not my go to device but it sits right here next to my laptop. I don't notice any drop on mine as a matter of fact it might sit there idle for a couple of days. Of course I don't measure the voltage every day either. Think I better watch it now.

you should....

i have several VVs. now i usually only keep one or 2 in my daily rotation, cuz i'm too lazy to check all the batts. if i use the mechs in my rotation and let the VVs sit a while, they will drain
 

Yerakon

Full Member
Dec 17, 2012
38
181
Cremona, Italy
... Just doesn't make sense how there is a battery drain

A little drain is normal in the Reo VV; only if batteries are old, the drain will be more evident. This happens when you do not turn off the little switch that disconnects the batteries (and my advice is to disconnect the switch when you're not using the Reo VV for a long time).

The circuit has inside a small LED that emits red light when the Reo is at rest (thus occurs a small current consumption) and blue when is active for delivery the current to the atomizer.

The LED normally is not visible, it is hidden behind the black cover so in my Reo VV, I made small hole and then I put a small fiber optic see the LED light; the light is very low, but I'm glad to see it :)

The Reo at rest:

img5574mu.jpg



The Reo active:

img5575go.jpg
 
Last edited:

CaptSteve

Airborn ECF Guru
ECF Veteran
Verified Member
Nov 20, 2011
14,537
40,523
41,000ft at M 0.85
Never thought of it that way, makes perfect sense LOL

That explains sooooo much. My VV can be steaming along at night, but some mornings I'll pick it up and ... nothing. Spontaneous battery drain never occurred to me. I think the Reo is so good that at night, when nobody's watching, it vapes itself.
 

Yerakon

Full Member
Dec 17, 2012
38
181
Cremona, Italy
Hmmm, I have no LED...

Sorry Mackman, I was inaccurate in describing! :) All Reos VV have the LED, your too, and the LED normally is not visible, it is hidden behind the black cover. You can see the LED in operation, looking through the space that you find near the adjusting wheel; you can do this in a dark room because the light is very low.
 
Last edited:

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA
A little drain is normal in the Reo VV; only if batteries are old, the drain will be more evident. This happens when you do not turn off the little switch that disconnects the batteries (and my advice is to disconnect the switch when you're not using the Reo VV for a long time).

The circuit has inside a small LED that emits red light when the Reo is at rest (thus occurs a small current consumption) and blue when is active for delivery the current to the atomizer.

The LED normally is not visible, it is hidden behind the black cover so in my Reo VV, I made small hole and then I put a small fiber optic see the LED light; the light is very low, but I'm glad to see it :)

I know what I'm gonna be checking for today. :) Thanks man!
 
Status
Not open for further replies.

Users who are viewing this thread