REO Technical Issues/Shop Talk

[Paramaniac413]

Hey, All!
2 questions:
1) is anyone using 316L for their Reo coils? I have some 26g and was thinking about trying it in my derringer, but wasn't sure (also not sure if I want spaced or tight for the coils).
2) does anyone know if you can get Phillips screws for the derringer? I'm having an awful time with my grub screws.


Sent from my iPhone using Tapatalk

 

[Train2]

Just trying for first time tonight.
Dual 28g 7-wrap SS316 coils for 0.4 ohms.
It's vaping GREAT. I might try 26 gauge but hate a "lag"...I just wanted an extra wrap or two compared to kanthal, and I achieved that...

Hey, All!
2 questions:
1) is anyone using 316L for their Reo coils? I have some 26g and was thinking about trying it in my derringer, but wasn't sure (also not sure if I want spaced or tight for the coils).
2) does anyone know if you can get Phillips screws for the derringer? I'm having an awful time with my grub screws.


Sent from my iPhone using Tapatalk

 

[Debadoo]

 

[Debadoo]

2) does anyone know if you can get Phillips screws for the derringer? I'm having an awful time with my grub screws.

now there's an idea....... I know the ones for the odin are too big lol Fixin to order some grub screws, but phillips would be nicer maybe

 

[Rule62]

2) does anyone know if you can get Phillips screws for the derringer? I'm having an awful time with my grub screws.


Sent from my iPhone using Tapatalk

Keep in mind, if ordering screws for the Derringer, whether Phillips head or grub screws; they are not metric. The Derringer uses American (SAE) size. The size is 4-40 x 1/8", if you go with grubs.

 

[oplholik]

Might check an Ace Hardware near you for the 4-40x1/8.

 

[CMD-Ky]

Just trying for first time tonight.
Dual 28g 7-wrap SS316 coils for 0.4 ohms.
It's vaping GREAT. I might try 26 gauge but hate a "lag"...I just wanted an extra wrap or two compared to kanthal, and I achieved that...

I am using 317L SS 28 gauge in an RM2 at 1.1 Ohm and I like it quite well. I use RxW and the combination dry burns nicely. It handles heat slightly different than the 316L and the lag will be a little faster (using SteamEngine as a guide). I use a spaced coil on a 2.5 screw. I got mine at Unkamen.

 

[Paramaniac413]

Thanks, All!
I have the issue where I strip the hex slot, so I thought maybe another type of screw would be better. I'll check over at Home Depot tomorrow.


Sent from my iPhone using Tapatalk

 

[Paramaniac413]

Rebuilt my derringer this evening. 316L 7 wrap spaced with 2.4mm ID. 0.4 ohms. Vapes like a champ. Almost no ramp up time.


Sent from my iPhone using Tapatalk

 

[Danrogers]

Would like to use an Oring on my LP Grand with my Origen, not to prevent leaking but to tighten the atty in the right position. Does anyone know what size Oring I should use?

 

[oplholik]

Do you have any that came with your Reo? I have both sizes Rob sells on his site, and one or the other usually work.

 

[Robinowitz]

Would like to use an Oring on my LP Grand with my Origen, not to prevent leaking but to tighten the atty in the right position. Does anyone know what size Oring I should use?

If by chance you don't have extras that were sent with the mod, I would be happy to send you some to try. Just PM me.

 

[Debadoo]

If by chance you don't have extras that were sent with the mod, I would be happy to send you some to try. Just PM me.

beat me to it.....I just ordered mine night before last so don't have em yet.

Dan.......these are the ones that I got.....but wanted mine more for stopping any leaking, since mine have the adjustable 510 pin.
Metric Buna O-rings 10.5 x 1.5mm Price for 50 pcs

This link came from the sloth of many names!!

 

[KentA]

Was the Mini Woodvil only produced in 14500?

 

[Justice]

Was the Mini Woodvil only produced in 14500?

No the 18490 as well.

 

[Danrogers]

If by chance you don't have extras that were sent with the mod, I would be happy to send you some to try. Just PM me.

In fact I found two o-rings but they seem kind of small, they just barely get around the inner ring of the Grands 510. What I am looking for is an Oring that the atty can be seated on so that I can put the air holes where I want and also the atomizer can stay tight. Does such a thing exist?

 

[oplholik]

Yes they do exist. Probably what Robin has will work. Maybe got to a good hardware store and see what they have.

 

[Train2]

I have a few different gauges, I use for that actually - for when I don't want to bother adjusting the 510 pin for a slight difference in atties, I can just put on the thinner or thicker Oring under it.

You're looking for these:
1.5x10mm
and
1.0x10mm

In fact I found two o-rings but they seem kind of small, they just barely get around the inner ring of the Grands 510. What I am looking for is an Oring that the atty can be seated on so that I can put the air holes where I want and also the atomizer can stay tight. Does such a thing exist?

 

[Paramaniac413]

Did someone say, at some point, that they had gotten squared bottles for their Grand?


Sent from my iPhone using Tapatalk

 

[oplholik]

Rob has them on his site.
8.5 ml Bottle & Tube Kit pack