Is the new Fogger good? How does it compare to the previous versions?
Here's my Fogger v4.1 on rDNA, triple twised 32ga, 1 ohm
I have a full write up on it in the fogger v5 thread. But yes i do like it more and more each day.
Show the builds you are using right now/ my running thread on my builds
- Thread starter jdake3265
- Start date
- th_trl_thread_readers 0
-
- Tags
- coil builds
- Status
I have a full write up on it in the fogger v5 thread. But yes i do like it more and more each day.
Nope, if you have a pin vise you can do it like this.
I use 1/16th drill bit in the pin vise, cut the length of wire i need for my ohm's, thread one end inbetween the teeth in pinvise hold the other end with pliers and bend away by holding the pliers still and turning the pinvise.
personally i wouldnt use anything but 20g-24g cus once you start stuffing the wick between the coil and post's you start destorting and warpping that flat shape, giving less performance.
if you try one also note the position of the wire in the centre of the coil, how mine is built it make's the coil sit higher above the deck, orelse you will be close to the deck and have to bend the centre leg
Last edited:
yes jdake 
tis one of my favourites , i did another one in my other mephisto..
heres a slightly dif build i've been playing with for a couple of days... 55mm length of 20g at 0.17Ω
i saw g-weezy doing it, so i copied .. i like it though, it gives great clouds and cotton stayed clean longer
tis one of my favourites , i did another one in my other mephisto..heres a slightly dif build i've been playing with for a couple of days... 55mm length of 20g at 0.17Ω
i saw g-weezy doing it, so i copied
.. i like it though, it gives great clouds and cotton stayed clean longer 
So I have tri coil going 28gauge comes in at about .5 ohms this was my sweetest day gift. Lol great man!
Thanks! I love it!Nice setup Nice build, looks perfect
Its perfect.
Odin bottom feeder, 8/7, 28awg, 1.5mmID, wicked with non boiled Rayon and loaded with Mothers Milk.
Each coil ohms out at .6 so divide by 2.
Best vape I have ever experienced. Massive clouds and flavor like I am drinking the juice out of the bottle.
Just incredible. Here is a pic of the build:
Each coil ohms out at .6 so divide by 2.
Best vape I have ever experienced. Massive clouds and flavor like I am drinking the juice out of the bottle.
Just incredible. Here is a pic of the build:
Dual macro 24ga Gplat @.28 on the Magma. Both air holes drilled out to 3mm and ditched the AFC. Looks like it's chucking on its own lol.
Guys i think that i have become... normal. i haven't built anything under .4 ohms in about four weeks. I believe there will still be .2 or .1 something builds in my future, but at the moment i believe i have become a "standard" builder. What is your input? should i continue on the path of normalcy or should i do a super sub ohm super nano? I think that my orchid has tamed me. I don't know how i feel about this since i am used to always pushing the limits of what builds and apvs can do.
I believe there will still be .2 or .1 something builds in my future, but at the moment i believe i have become a "standard" builder. What is your input? should i continue on the path of normalcy or should i do a super sub ohm super nano? I think that my orchid has tamed me. I don't know how i feel about this since i am used to always pushing the limits of what builds and apvs can do.
I have the urge now but i have been feeling very apathetic about vaping recently, not as excited as i once was, I still vape every day, but it just isn't as fun as it used to be, i don't know what is going on. I think that i am just bored, or something.
Naw. I'm feeling that way right now. Kind of tired of vaping. Charging batteries, re-wick, DIY, good juices at expensive price, etc. But all the money I spent I need to keep going for awhile. Ever since getting the Sigelei clouds come even more.
Last edited:
I've been vaping my Sigelei 100w at 30 watts. Lol. I still enjoy it but I've never been into doing super crazy builds. I don't like anything but just normal micro coils for myself. I like looking at other peoples builds but I can't do it. I have tried twisted but the ramp up time is terrible and all the other stuff just is so complicated it doesn't even seem fun.
Been awhile since I did a coil build sequence photo bomb so I thought I would share my Lancia build
I used all the 3mm air posts to go with my wide bore drip tip, lots of airflow for this build
Dual 26G spaced coils over 3mm screw came out to 0.48 ohms. On a fresh battery 4.2 Volts = 8.75 Amps at 36.75 Watts
For my spaced coils I like to use a screw to keep everything even:
Shot of the Duals after wrapping:
Side shot of a coil:
I use the screws to help mount the coils:
Shot of the mounted coils from the top:
Mounted coil shot from the side:
Couple shots of test firing
Medium glow:
more power to it:
I use Rayon for the wicking, shot of it pulled thru and trimmed to be fuzzy:
Wick juiced and tucked:
Wick chambered:
Final build shot:
I used all the 3mm air posts to go with my wide bore drip tip, lots of airflow for this build
Dual 26G spaced coils over 3mm screw came out to 0.48 ohms. On a fresh battery 4.2 Volts = 8.75 Amps at 36.75 Watts
For my spaced coils I like to use a screw to keep everything even:
Shot of the Duals after wrapping:
Side shot of a coil:
I use the screws to help mount the coils:
Shot of the mounted coils from the top:
Mounted coil shot from the side:
Couple shots of test firing
Medium glow:
more power to it:
I use Rayon for the wicking, shot of it pulled thru and trimmed to be fuzzy:
Wick juiced and tucked:
Wick chambered:
Final build shot:
- Status
