Sigelei 100 watt dual 18650 box mod

[sando7]

well i been vaping on this bad boy for the last few hours and i gotta say "WOW" & "K-POW"....can only take a few hits then i gotta put it down....this is a hole new ball-game and i'm a dedicated Mec man and this device is kickin my a@@ at 60 watts...
did another build on my Tobh at .4.wicked w/Cotton.....turned the body of the Tobh upside down to raise the air-holes to get a deeper well and raised the coils to accommodate and now it holds about 40 drops also using a clear drip-top, the airflow is super fine and the Vapor comes in plumes, my Cat got up and booked to the other room......either i'm gonna get used to this or i'm going back down to about 30 to 40 watts with a build to match.....
my hat is off to the folks who vape at 100 + watts is all i can say....but i love this device so far and i'm glad to have it, it's definitely a Mec killer.


gonna make me some 3mg nic jooze today and start over!

 

[sando7]

thrifty e-cig has these on pre-order for 81 bucks, expected t words the end of the month.

 

[laramik]

thrifty e-cig has these on pre-order for 81 bucks, expected t words the end of the month.

That's a steal! I can't even believe this thing is only 100 bucks. If have easily dropped 200 maybe even 300 knowing what a great unit it is.


Sent from my iPhone using Tapatalk

 

[sando7]

dude at thrifty is good people, have made many purchases from him and never a prob; even has PP
think he's in MN

 

[sando7]

hey yall finally got it rite, i took laramik's advice and went down in Nic; using 3mg and all has been cool all day......man last nite i thought my head was gonna come off and i was using 6mg....overall it's been a very enjoyable Vape day at 60 watts......vaped most of the day yesterday and all day today and i'm down to 35% battery....gonna recharge at 30%....a learning experience........built and tried my 454 big block and it was way to hot at .4 even with all the airflow on that badboy......the drip-top on the Tobh or the CLT works amazingly well and keeps things nice and comfortable....would highly suggest the drip-tops at higher wattages....enjoy the

http://101vape.com/drip-tips/440-wide-bore-top-cap-drip-tip-for-tobh-atty-chuff-enuff-clone.html

fits the Tobh, Stillare, CLT, Vulcan that i'm sure of cause i tried them all.

 

[laramik]

Awesome man. Glad you're rocking the watts. And yep, gotta use that chuff tip for those mega watt builds.


Sent from my iPhone using Tapatalk

 

[katarax]

So I have a Panzer and a plume veil and I am loving the set up a lot. However, I hate having to drip while I drive and also not being able to see .... at night when im dripping as well.

I have been considering getting a box mod paired with the orchid v2 that has a similar heat, flavor, vapor combination as a dripper but the convenience of not having to drip over and over again when im on the go. Do you guys think the two would do good together or would the orchid not handle higher amounts of power (30+ watts)? Just wanted to ask so in case a 30 watt mod would be more reasonable for the set up. Though i do see my self swapping the sigelei for the panzer considering its been dubbed a "mech mod killer."

Let me know if you guys have any input..

 

[inswva]

So I have a Panzer and a plume veil and I am loving the set up a lot. However, I hate having to drip while I drive and also not being able to see .... at night when im dripping as well.

I have been considering getting a box mod paired with the orchid v2 that has a similar heat, flavor, vapor combination as a dripper but the convenience of not having to drip over and over again when im on the go. Do you guys think the two would do good together or would the orchid not handle higher amounts of power (30+ watts)? Just wanted to ask so in case a 30 watt mod would be more reasonable for the set up. Though i do see my self swapping the sigelei for the panzer considering its been dubbed a "mech mod killer."

Let me know if you guys have any input..

I'll be ordering the Sigelei next week and plan to use it primarily with my Big Dripper clone running probably in the neighborhood of 55-60W. Drip and drive, no problem.

I don't have an Orchid but my Eleaf Lemo with a .7 26ga parallel runs at 30W all day long.

 

[katarax]

i also forgot to add i drive a manual transmission so it's a tad more difficult to drip and drive

 

[laramik]

So I have a Panzer and a plume veil and I am loving the set up a lot. However, I hate having to drip while I drive and also not being able to see .... at night when im dripping as well.

I have been considering getting a box mod paired with the orchid v2 that has a similar heat, flavor, vapor combination as a dripper but the convenience of not having to drip over and over again when im on the go. Do you guys think the two would do good together or would the orchid not handle higher amounts of power (30+ watts)? Just wanted to ask so in case a 30 watt mod would be more reasonable for the set up. Though i do see my self swapping the sigelei for the panzer considering its been dubbed a "mech mod killer."

Let me know if you guys have any input..

I am running an orchid at .8 ohms at 45 watts all day for the last 2 weeks. You'll be fine. Just keep your wicks small to allow them to wick. If you fill the channels with wick, it won't wick quickly enough.

 

[sando7]

......@katarax, i just got to say i like your Avatar!

 

[katarax]

I am running an orchid at .8 ohms at 45 watts all day for the last 2 weeks. You'll be fine. Just keep your wicks small to allow them to wick. If you fill the channels with wick, it won't wick quickly enough.

thank you! Yeah i just want to mimic the way a dripper hits while having a tank ( mainly open airflow is what im looking for )

 

[Varelse]

thank you! Yeah i just want to mimic the way a dripper hits while having a tank ( mainly open airflow is what im looking for )

Big Dipper holds the most juice and uses a seperate sealed resv. I have one otw. TOBH 30mm is also cool-I think you can turn the body upside down for a bigger juice well. Having 30ml squeeze bottles with steel tips for quicker top offs on RDA's helps too.

Just decided on the Sig. If this takes a crap after two mos I'm going back to copenhagen.








Don't be a menace to south central while vaping your juice.

 

[entoptic]

Just got mine in the mail. Ordered Thur from vapenw. I'm super happy with purchase. Rocking the magma .34 ohm at 60.9w. Freaking beast!

Came with 2 black carbon fiber stickers screwdriver 4screws and 4 replacement copper connectors.

sent from my non-iPhone using my nose.

 

[sando7]

little update, got mine wrapped, think it looks pretty good from j-wrap, the back cover piece covers the screw holes so now only magnets holding the door cover....the build is 26ga Nichrome-80 dual coil @ .4 between 50 to 60 watts with 3mg nic and i have my Tobh (Body/Cap) turned upside down for a Deeper Well (coils raised) to match the air-holes and using a Chuff Drip-Top......also have my Copper 510 Pin screwed almost all the way down on the Sig and my Copper Tobh 510 Pin sticks out quite a bit; everything sits flush and the resistance has held steady for 3 days now everything is nice and snug....

 

[laramik]

Very nice man.


Sent from my iPhone using Tapatalk

 

[4redstars]

So I'm guessing that the 50 and 100 Watt sigelei's have the same 510 pin. Does anyone know of a place where we could get replacements? Hardware store? Ebay store? Amazon Store?

I think I got the all copper versions and not the copper plated brass.

I looked around googling different screws but couldn't find anything.

 

[sando7]

i emailed Sigelei today asking about it (pins), if they respond i don't know.

 

[4redstars]

i emailed Sigelei today asking about it (pins), if they respond i don't know.

I'm even thinking of asking P4U because I bet the IPV1 2 and 3 are using the same size pins and they have the full screw head for more surface area.

 

[Heespharm]

So I'm guessing that the 50 and 100 Watt sigelei's have the same 510 pin. Does anyone know of a place where we could get replacements? Hardware store? Ebay store? Amazon Store?

I think I got the all copper versions and not the copper plated brass.

I looked around googling different screws but couldn't find anything.

Email sigelei


Sent from my iPhone using Tapatalk