sigelei 150 showing low resistance problem help.....

[jaxtan]

my sigelei keeps showing low resistance whenever i press fire button. even with no tank. what can i do?

 

[speedy_r6]

What resistance is the coil in the tank?

 

[jaxtan]

no coil also show low resistance is mod issue

 

[suprtrkr]

It's supposed to do that with no tank. With a tank on, if it does the same, either you have a bad coil, a bad connection at the center pin, or your resistance is too low.

 

[alcarl]

It's supposed to do that with no tank. With a tank on, if it does the same, either you have a bad coil, a bad connection at the center pin, or your resistance is too low.

No, if you fire the 150 with no atty on the device it will say "Check Atomizer"...not "Low Resistance"...being "Low Resistance" is not a normal error when no atty is attached, it almost sounds like a bad chip IMO. **Unless the OP is talking about the 150 TC device...I am not sure about the errors on that device.**

 

[suprtrkr]

Ah, ok. Maybe I am wrong.

No, if you fire the 150 with no atty on the device it will say "Check Atomizer"...not "Low Resistance"...being "Low Resistance" is not a normal error when no atty is attached, it almost sounds like a bad chip IMO. **Unless the OP is talking about the 150 TC device...I am not sure about the errors on that device.**

 

[alcarl]

Did a little research. If you're getting a "Low Resistance" with no atomizer attached, it sounds like a device issue. Even the 150 TC will show "Check Atomizer" , not "Low Resistance" if you fire the device without an atomizer. Below is a screen snip from the 150 TC devices manual.

 

[jaxtan]

ya im using sigelei 150 tc with normal coils. even with no atomizer it shows low resistance. seems like the mod is haywired?

 

[jaxtan]

Crap i cant attach a pix from my hp seems like file size too big

 

[alcarl]

Sound that way to me, unfortunately. With no atomizer it shouldn't say "Low Resistance".

 

[BrotherBob]

Welcome and glad you joined.
Could visit the local B&M Vape shop and they might be able to fix it or you could contact the seller/manufacturer.