Sigelei Z-max v.3 telescope

[kennypo]

Hello new friends. I bought a zmax v3 telescope from exhalevapors.com for $59. I picked it up this morning and I am in awe of its looks. However..... upon taking the carto tank off of my volcano lavatube v2 and putting on zmax, i noticed the light wobble the tank had. Its threaded as tight as it can go without breaking the thing, but it does seem like it is loose. It doesn't wobbly freely but I can push the tank around 3/16 of an inch to front, back, and side to side. Wouldnt be a big deal if I also was able to get good air flow. It feels like i'm sucking a grape through a straw. I don't have this problem on any of my other tanks on the lavatube. Is it my unit? Has anyone else had this problem?

Please share your thoughts and any problems you have experienced with your sigelei z max v3 tele.

I have emailed exhalevapors but I am sure they are closed and will not responde until tomorrow.

 

[RKAznam]

Hi. Mine does wobble just a tad and what I've done is to give my clearomizer a "micro" twist leaning towards where the wobble is. More often I don't bother as long as there's contact and it fires.

 

[Bill's Magic Vapor]

Hello new friends. I bought a zmax v3 telescope from exhalevapors.com for $59. I picked it up this morning and I am in awe of its looks. However..... upon taking the carto tank off of my volcano lavatube v2 and putting on zmax, i noticed the light wobble the tank had. Its threaded as tight as it can go without breaking the thing, but it does seem like it is loose. It doesn't wobbly freely but I can push the tank around 3/16 of an inch to front, back, and side to side. Wouldnt be a big deal if I also was able to get good air flow. It feels like i'm sucking a grape through a straw. I don't have this problem on any of my other tanks on the lavatube. Is it my unit? Has anyone else had this problem?

Please share your thoughts and any problems you have experienced with your sigelei z max v3 tele.

I have emailed exhalevapors but I am sure they are closed and will not responde until tomorrow.

I have noticed threading problems with the V3. Occasionally, I have connection problems that seem to come and go, from time to time. I am more afraid of over-tightening than anything else. I'll remove the device and try it again later and it connects just fine. Strange. I haven't figured it out yet, and most of the threading issues involve the ego threading and not the 510 connection. Anyway, that's my experience thus far.

 

[air1max]

if you need to, make sure you return it quickly. zmax v3s are known to have problems. mine lasted less than a month but exhale won't do anything after 14 days. sheesh, it took a week just to get it. left me 7 days for review. my problem was the button. sometimes doesn't fire, also cycles through menu sometimes when you press it once to vape. so make sure you test it good and fast. personally, I wouldn't buy from them. there are lots of good vendors out there. don't get stuck with an expensive paper weight like I did. just a heads up from experience.

 

[whasapening]

i also have the same problem as air1max. My device misfires. If you look closely in your button and screen you will notice it has shifted. i know what the problem is but can't find anything on the internet on how to dissasemble.