Smoktech RSST All throat hit no vapor

[Pecks]

So i decided to microcoil a RSST with cotton. Local vape shop ran out of SS mesh so i decided to give cotton a try. Its wicking pretty nicely But when i hit it my throat gets hit by a truck but i get no vapor what so ever any help ?

 

[bulldog63h]

Are you lining the air hole up with the coil?

 

[n3me51s]

I would say three possibly things IMO…

1. The air hole isn't lining up properly as stated by Bulldog63h.
2. The air hole isn't large enough for the amount of heat/vape from the res of the coil (what ohm, what gauge, how large the coil diameter etc.)
3. You may possibly have a hot leg and it's creating a very bright hotspot because it's not getting juice to keep it cool.

I'm sure there's other reasons, but those would be my top three ideas!

Good luck figuring it out! Let me know if you figure it out!!!

 

[Sthur]

Welcome to the forums. I have the rsst and use micro coils with cotton. The stock air hole sucks, I drilled mine to 1/16 and much better. Also microcoil was 1/16 bit. Make sure coil is lined up like above.

Good luck and again welcome.

 

[Pecks]

Thanks for the Welcome. air hole is lined up with the coil. No hot spots that i know of . 30g kanthal 100%natural organic cotton. Not to sure how many ohms left my ohm meter at my girlfriends house. My guess would be around 1.4 . Oh and im using a nemesis mod. Also drilled the airhole out to around 2mm