Snails - Response on Threads Part 4
- Thread starter classwife
- Start date
- th_trl_thread_readers 0
- Status
And in other news--Dr. Farsalinos's crowd funding campaign not only meets but exceeds the goal of $72K!!! The final figure is $73,122.00.
https://www.indiegogo.com/projects/e-cigarette-research-temperature-of-evaporation
Thank you all who donated! Congratulations to Dr.K.
Hey Tibs, are my relentless solicitations forgiven?
well, i wouldn't call them relentless
but still - telling us once usually does the trick
catt probably does what you're supposed to do
find the right setting for each device by starting low and increasing till you find the right spot. and never expect to be able to duplicate this on another device by just punching in the numbers!
Nope, not really
. Generally start out at 4V and adjust from there. Initially may go down to ~3.5 and up to ~5; but no matter what device used, still end up setting it at 3.8 - 4.2V. I shoot for 2.5 ohm coils on my builds; I usually hit between 2.4 - 2.7 ohms - any lower or higher and I try again. 
WooooHoooo, I just finished building my first coil on my new Magma rda.............. and it works awesome.
It was no problem at all. 9 wraps of 28 gauge kanthal on 3mm screwdriver. It came out to 1.65 ohms. threaded some cotton and wetted it down with juice and we're vaping at 4.8 volts. Huge clouds for a single coil. I'm going to need to drop my nicotine level from 18mg to ?. I took a couple hits and I have a nicco buzz.
p.s. I found out what my problem was when I tried building my own coils a couple of years ago. It was on a genesis atty, which I'm told is the hardest atty to build a coil that works.
I'm very happy with myself. It took me less than 10 minutes to wrap the coil and mount it on my atty. I fired it up a couple times and compressed the coil to work out the hot spots and now I'm blowing clouds.
It was no problem at all. 9 wraps of 28 gauge kanthal on 3mm screwdriver. It came out to 1.65 ohms. threaded some cotton and wetted it down with juice and we're vaping at 4.8 volts. Huge clouds for a single coil. I'm going to need to drop my nicotine level from 18mg to ?. I took a couple hits and I have a nicco buzz.p.s. I found out what my problem was when I tried building my own coils a couple of years ago. It was on a genesis atty, which I'm told is the hardest atty to build a coil that works.
I'm very happy with myself.
It took me less than 10 minutes to wrap the coil and mount it on my atty. I fired it up a couple times and compressed the coil to work out the hot spots and now I'm blowing clouds.
thanks, guys. I've stayed away from this all this time because I thought it was difficult. No problem. Have a great night. It's football time.
~~~~ @ atty
no worries, frannie! as long as what you do works that's all that counts!
no worries, frannie! as long as what you do works that's all that counts!
Tired.
Hitting they hay early. Going to play a few games of sudoku to clear my brain and then zonk.
Hope all have a safe and good night. Sleep well.
Hitting they hay early. Going to play a few games of sudoku to clear my brain and then zonk.
Hope all have a safe and good night. Sleep well.
I can and I have wrapped coils for a genesis RBA. Hated the taste. Like my little toppers much better.
night, atty! strange but i feel about the same! i'll make it an early night too and catch up with y'all in the morning before getting on the road.
goodnight and sweet dreams
strange but i feel about the same! i'll make it an early night too and catch up with y'all in the morning before getting on the road.goodnight and sweet dreams
yup! i've been using one of yours for over 2 weeks now on the istick and i have no complaints!
gone now!
- Status
