RDA Snapdragon v1.5 owners --->

[phanner]

Quick question, because I've looked everywhere, read many posts, watched some YouTube videos, etc., to no avail. I have always felt like the tolerances of my AFC were not right. It spins quite freely, which doesn't seem right to me, for the caliber of rda that it is. So much so that occasionally it will move in my pocket even!

Does yours? Maybe post a quick vid turning your AFC or a breakdown shot of your Snapdragon? I think I may be missing an o-ring or something

Thanks!

 

[phanner]

52 views and nobody has a Snapdragon and can weigh in?

 

[Tamer El-Meehy]

I always wanted one. Sounds like there is something wrong with it. Was it always like that? Did you buy it first hand?


Sent from my iPhone using Tapatalk

 

[Canadian_Vaper]

I don't own one but as soon as juice gets into a AFC they turn much more freely...

 

[mindriot]

Quick question, because I've looked everywhere, read many posts, watched some YouTube videos, etc., to no avail. I have always felt like the tolerances of my AFC were not right. It spins quite freely, which doesn't seem right to me, for the caliber of RDA that it is. So much so that occasionally it will move in my pocket even!

Does yours? Maybe post a quick vid turning your AFC or a breakdown shot of your Snapdragon? I think I may be missing an o-ring or something

Thanks!

It doesn't sound right, the AFC is fairly tight not really tight but you should feel some reasonable restriction, should generally feel quite smooth definitely not free or loose. If you take the two screws out the base and lift the base off you should find a black O-Ring that sits along the top edge of the AFC ring to restrict its movement, if that is missing that could be the problem (there is a spare in the spares kit). Alternatively if the base isn't put together tightly enough then there is next to no friction on that O-Ring so it could just be that the screws in the base are slightly slack. Taking the base screws out is fairly safe, however if you are taking out the insulator section be very careful not to lose the squonk seal, that thing is nightmarishly small. If you continue to have problems with it then you shouldn't hesitate to contact Eden Mods, they are generally very helpful, alternatively if you post a question and some photos on their Facebook group they (and everyone else) will try to figure it out with you.

Edit: Over in the RDA section there is a snapdragon thread with a parts breakdown on the third page SnapDragon RDA the O-Ring to check for is shown in the top right image (O-Ring 2) and you can also see it in the bottom left image. O-ring 5 in the bottom right image is the one to be very careful not to lose.

 

[inswva]

The AFC on mine moves very freely but I haven't had it move while in my pocket.

 

[mindriot]

The AFC on mine moves very freely but I haven't had it move while in my pocket.

Weird, I can unscrew mine off a mod by the AFC ring

 

[phanner]

I always wanted one. Sounds like there is something wrong with it. Was it always like that? Did you buy it first hand?


Sent from my iPhone using Tapatalk

First hand, yes

There definitely seems to be some difference then?

 

[Tamer El-Meehy]

You can ask for a replacement then


Sent from my iPhone using Tapatalk