Some homemade attys and genesis

[asdaq]

Slimest, polyethylene or polyolefin will work fine too.

 

[lorderos33]

Now I use for insulatoin a tubes removed from thermoresistant wires (taken from a halogen lamp wiring). I thought about a heat shrink, but I am afraid of a smell. What is your experience - is any heat shrink thermoresistant enough, or we need something special?

I'm not sure what I used on mine so to be sure I'll check the package and post it up. It has not given me any issue with smell or re-melt from heat at all.

***Update***

I used Viton heat shrink tubes. They are stable to 220 degrees C and are very chemically resistant The operating temps are very wide as well. from -35 C to +220 C.

 

[UA72Riddle]

Looking good sturm! Great work!

 

[Turbo]

Ok, anyone that's running a list put me on by default-- Turbo gets a permanent put on list pass...lol

I can't say that I'll have the flow when the time comes but put me on anyway

 

[Scubabatdan]

Ok, anyone that's running a list put me on by default-- Turbo gets a permanent put on list pass...lol

I can't say that I'll have the flow when the time comes but put me on anyway

Ok you are on my list, along with everyone else that was interested in Co-Op.
Dan

 

[bmwzero]

Dan is your list for ego type scubagens?

 

[Scubabatdan]

Dan is your list for ego type scubagens?

The first one will most likely be a universal that has the tapered bottom. Not Ego specific but would work on an Ego, I am going this route as they would be cheaper per unit (approx $20.00). The Co-OP member would recieve the main body and top cap only, it would be up to them to add the 510 adapter, poly tubing, o-rings and wiring. This is provided I get enough interest, since I would start the order with a min of 100 bodys and caps (approx $2000.00). The material would be stainless steel, and would take a lead time of 30 days once the order is put in.

Hope that helps.
Dan

 

[bmwzero]

Ok put me on the list

 

[theECB]

Dan, put me on the list as well. At a price of $20 per unit, I would also consider ordering multiple units to help achieve the 100 min order.

 

[UA72Riddle]

I would be interested in multiples as well Dan. I'll be looking for the start of it!

 

[Turbo]

Dan, put me on the list as well. At a price of $20 per unit, I would also consider ordering multiple units to help achieve the 100 min order.

Yeah, I could do (2) units for that price surely, maybe even more.

 

[UA72Riddle]

Now that I have some free time.....time to assemble the genisis! Hope I got it all right this time!

 

[UA72Riddle]

Yeah, at that price I'll probably go for 5 or 10! I know of a few people that aren't on here that will want one. Have been eyeballing my hybrid since I got it. LOL

Yeah, I could do (2) units for that price surely, maybe even more.

 

[MadmanMacguyver]

Add me dan...I can probably swing 2 but definitely one...I have a friend who is currently w/o internet wanting one...

 

[asdaq]

Which post # is the Scubagen V1? Romping around and even google is failing me.

edit: or is it V3 I should be looking for?

 

[roygodbold]

@Dan the Man - If there's room on your list please put me down for one! Also, if you want to part with some of those
springs, I'd be willing to pay for a couple. Currently using your fantastic find on the Cat5 connectors but think the
springs would do better. Thanks.

 

[UA72Riddle]

I may be wrong, but I think it's the v3

Which post # is the Scubagen V1? Romping around and even google is failing me.

edit: or is it V3 I should be looking for?

 

[lorderos33]

The first one will most likely be a universal that has the tapered bottom. Not Ego specific but would work on an Ego, I am going this route as they would be cheaper per unit (approx $20.00). The Co-OP member would recieve the main body and top cap only, it would be up to them to add the 510 adapter, poly tubing, o-rings and wiring. This is provided I get enough interest, since I would start the order with a min of 100 bodys and caps (approx $2000.00). The material would be stainless steel, and would take a lead time of 30 days once the order is put in.

Hope that helps.
Dan

I'll take 2 for sure. Looks like there is alot of interest in this one. I have a couple of simple questions too. What size tubing is used for it? How does she look on the provari?

Maybe a ScubaGen v3 signup post should be put up to keep it orderly

 

[Dalton63841]

How does she look on the provari?

Haha same idea I had. Bout to order my provari in a day or two. Just waiting on funds. I am betting this would be wonderful sitting on top of it.

 

[asdaq]

Separate sign up THREAD would be good. Tubing sizes here:

7/8 OD and 3/4 ID poly tubing (Lexan), all the internal pieces are lathed to .73" and the o-ring grooves are then lathed to .64". I am using 3/4" x 1/16" FDA approved o-rings from MCMaster-Carr. The air channel down the center is a .2" (13/64") hole.

I'm pretty sure Dan showed it on a provari, looks great and ideal for that.