Soon to be new REO owner with questions
- Thread starter Myrany
- Start date
- th_trl_thread_readers 0
- Status
Myrany,
This video should help
How To Make A Perfect Micro Coil With The Darkzero Coil Jig - YouTube
Unfortunately Micro coils are going to have to wait a month or so. vape budget is totally blown at this point so ordering a lower gauge of wire isn't really in the cards. I fully intend to try this though at first opportunity!
The coil I have is definitely doing better. Quite a nice vape. Next one I will raise off the deck a bit more. I vape very low nic juice and I think it is the lack of TH hitting me.
Myrany,
Not sure what your using but 30 ga makes wonderful micro coils. I just ordered up some 29 & 28 ga and I have 27 & 30. If you want, PM my your mailing info and I'll shoot you some of each once it all gets here
Not sure what your using but 30 ga makes wonderful micro coils. I just ordered up some 29 & 28 ga and I have 27 & 30. If you want, PM my your mailing info and I'll shoot you some of each once it all gets here
Thanks for showing us, Myrany. Nothing wrong with your coil. I too like my TH. Two things you can do - less wraps for lower resistance, and raising the coil. Hope you sleep better tonight. And please, ask questions if you have any at all!
I also had 32 gauge to start with and found if I folded it in half and then wrapped a dual wire coil I could get more wraps and a lower resistance. This is a 10/11 wrap 1.2 ohm coil.
ok Getting the Jig in the video is not going to be in the cards for awhile. Does anyone know a longish nail that is about the right diameter to do the micro coil around? The hubby said with a nail, a screw and a bit of wood (probably all from his contractor brother) we could rig something to do the same job on a temporary basis.
Use a piece of hard wood, pine is too soft. You can buy a cheap 1/16" drill bit for under 3 bucks. Works great to wrap around and is what I'm using until I can get the jig.
I had 50' of 30 gauge kantral arrive today and it was 4 bucks. If you can scrounge the cash I highly recommend it.
http://www.temcoindustrialpower.com...r=1&t1=kanthal+30+gauge&submit.x=0&submit.y=0
I have a set of drill bits for my cordless drill so I just grabbed the 1/16" bit to use.
Myrany, I'll send ya some of my favorite needles to wrap coils around with the wire
Myrany, I'll send ya some of my favorite needles to wrap coils around with the wire
You are spoiling me my friend
I know better than to get anywhere near the hubby's tools. Fortunately so far my coil building has done well enough with some tools I got for myself to do some Wire jewelry making a few years ago.
I have seen some peeps copy DZ's jig in wood. But, yeah, many ways to kill a cat. Currently I just use a clamp with drill bit.
I have seen some peeps copy DZ's jig in wood. But, yeah, many ways to kill a cat. Currently I just use a clamp with drill bit.
Smart Idea. It took me a minute to realize the drill bit was the tiny rod sticking out the top. The spiral of the clamp seemed WAY too big. hahahahahaha YAY for 2:30 AM and still not sleeping.
You will find the person that uses the spiral part at the top of the beanstalk! They have giant Reos there as well. Where do you think the clouds in the sky come from?
Go to sleep now!You will find the person that uses the spiral part at the top of the beanstalk! They have giant Reos there as well. Where do you think the clouds in the sky come from?
Sir yes sir!
(lets hope I manage it this time pushing 48 hours awake at this point)
Sir yes sir!
(lets hope I manage it this time pushing 48 hours awake at this point)
The first weekend I EVER vaped, I couldn't sleep at all. I don't know what nic level you're using, or if insomnia is a chronic problem that has nothing to do with vaping for you....but once I lowered my nic level, I could sleep again. In fact, I started (for awhile) lowering my nic just in the evenings, and that worked. Just a thought.....
Jan
- Status
