what are the minimum order you would require for custom orders? and do they all need to be the same color?cheers
- Status
what are the minimum order you would require for custom orders? and do they all need to be the same color?cheers
Wish we could but the set-up for the coloring process is pretty time consuming. The tanks are done in batches...usually 50 or so per size/color. We can offer custom sizes to mod makers/vendors at wholesale but it's not possible for us to make a handful at a time. Foggatti tanks are on the short list though
Last edited:
Any chance you'll be getting tanks in that will fit the Kayfun Quartz Glass replacements they have out now?
Tarsius Full Size Kayfun Quartz Kit - Kidney Puncher
I would love to get a quartz kit for my Kayfun but want to add some color to it as well.
Comes in a nano version too...
Tarsius Kayfun Quartz Nano Kit - Kidney Puncher
Tarsius Full Size Kayfun Quartz Kit - Kidney Puncher
I would love to get a quartz kit for my Kayfun but want to add some color to it as well.
Comes in a nano version too...
Tarsius Kayfun Quartz Nano Kit - Kidney Puncher
Yes indeed! That one is a priority. We have both the Standard and Nano measured and ready to go. Regular 22 x 1.5 glass is a bit tight and I believe that's why folks were cracking tanks initially. We're looking into sourcing tubing with the perfect ID right now.
Good to hear because I just bought a second Kayfun today...... I hate plastic tanks
Now on to the next challenge..... Have you seen the Fogger V3? It has clear glass that looks boring as hell.... and I bought one of those today too.
Ideally it would be nice to be able to purchase the stainless threaded pieces with a colored tube instead of two separate purchases , hint-hint
Bet a machine shop could knock those out at a relatively reasonable rate and you'd have better control of tolerances, just sayin'....
Uno is full of good suggestions! We diluted the blue and purple because it was a good idea Having the caps machined to control the tolerances makes perfect sense. We need to look into tubing with the perfect ID and go from there. I know someone who owns a machine shop and if it comes down......
Having the caps machined to control the tolerances makes perfect sense. We need to look into tubing with the perfect ID and go from there. I know someone who owns a machine shop and if it comes down......
Last edited:
Must be nice. Most shops don't return my calls, and the ones who do get back to me with insane quotes.
Example: I wanted some tubes cut and threaded. Was told $85 each tube. Yep.
Uno is full of good suggestions! We diluted the blue and purple because it was a good idea
It's been a while since I quoted CNC work, we were at the time charging $60/hr plus set-up time and material cost. Guess what I'm gettin' at is a turning center should be able to knock a set out in say 7 to 8 minutes and starting with tubing the material cost really wouldn't be that high, it's very doable
Hey Elantis! Thanks for the recent order!! Included a couple extras for ya
Oooo...surprises! I
surprises!
It is
I don't want to throw out a number here, but you might be surprised at what the cost would be for say a run of 100 sets, pretty sure you can beat that price with a colored tube
Received my package today and Thanks so much!!
Funny thing, my original order had those in there too!!! Since I have been using my 22mm carto tanks a lot recently, I decided I needed something to add some color and with the cold weather I found I really like the pyrex tips vs the metal ones!
As soon as I empty some current tanks, going to put together some color and I will post some pics!
(((Hugs))) and thanks again!
Funny thing, my original order had those in there too!!! Since I have been using my 22mm carto tanks a lot recently, I decided I needed something to add some color and with the cold weather I found I really like the pyrex tips vs the metal ones!
As soon as I empty some current tanks, going to put together some color and I will post some pics!
(((Hugs))) and thanks again!
Last edited:
Ideally it would be nice to be able to purchase the stainless threaded pieces with a colored tube instead of two separate purchases , hint-hint
I'm looking forward to this! The day it's a reality, I'll buy a couple!
I'm looking forward to this! The day it's a reality, I'll buy a couple!
I'm lookin' at 3 to 4 minimum myself
Hell yes! Kayfun glass with the machined threading and without the $50 per kit cost? I'm all for it.
- Status
Similar threads
