Fire clip links scroll down and click "see more"
Splitsquaredbuild on the @hobo_customs Hobo rda. Quad 22g 3/split/3 wrap with an approx 7/64 I.D This was a fun build. I have these tiny pliers with a flat tip. I used the tip as a measuring tool to have even bends lengths or else they will not align properly!! It's pretty much a modified split coil version but in a square orientation all alround. I found it proper to build it on the Hobo Atty as it has very cool square posts. Same process as split coils but you just utilize the square bends instead of coiling. Too bad one of the squares kind of kinked after the test fire and adjustments. There's a myth that resistance is affected by having too many bends. Unless you are changing the cross sectional of the wire, or the length then the resistance will remain the same. Now severe bends are "kinks" but the thickness of the 22ga makes up for the internal disruption of the bends thus not allowing a specific hotspot after adjustments! Thank you guys for tuning in and I'll post the quick fire vid in a few. I hope to develop this build as well. I get tons of questions why some of these builds I try doesn't perform to its maximum potential. It's because almost all of these out of the box builds are still in its baby stages and only time will cure as we get better and advance to better the builds. I mean even today, we are still trying to create and looking for better improvements to the industry standard micro coils right!? Anyway thanks again for peeping the build I enjoyed making it and sharing with you all.
Fire clips via Instagram: (Please turn speakers down. Choose one of the links)
Instagram
or
https://www.facebook.com/photo.php?v=689348661159729&set=vb.592646290829967&type=2&theater
or
http://scontent-a.cdninstagram.com/...-16/10613705_1487847861459421_696026480_n.mp4
For more of these out of the box builds visit or say hi at facebook.com/deedupdex or instagram.com/deedupdex
Splitsquaredbuild on the @hobo_customs Hobo rda. Quad 22g 3/split/3 wrap with an approx 7/64 I.D This was a fun build. I have these tiny pliers with a flat tip. I used the tip as a measuring tool to have even bends lengths or else they will not align properly!! It's pretty much a modified split coil version but in a square orientation all alround. I found it proper to build it on the Hobo Atty as it has very cool square posts. Same process as split coils but you just utilize the square bends instead of coiling. Too bad one of the squares kind of kinked after the test fire and adjustments. There's a myth that resistance is affected by having too many bends. Unless you are changing the cross sectional of the wire, or the length then the resistance will remain the same. Now severe bends are "kinks" but the thickness of the 22ga makes up for the internal disruption of the bends thus not allowing a specific hotspot after adjustments! Thank you guys for tuning in and I'll post the quick fire vid in a few. I hope to develop this build as well. I get tons of questions why some of these builds I try doesn't perform to its maximum potential. It's because almost all of these out of the box builds are still in its baby stages and only time will cure as we get better and advance to better the builds. I mean even today, we are still trying to create and looking for better improvements to the industry standard micro coils right!? Anyway thanks again for peeping the build I enjoyed making it and sharing with you all.
Fire clips via Instagram: (Please turn speakers down. Choose one of the links)
or
https://www.facebook.com/photo.php?v=689348661159729&set=vb.592646290829967&type=2&theater
or
http://scontent-a.cdninstagram.com/...-16/10613705_1487847861459421_696026480_n.mp4
For more of these out of the box builds visit or say hi at facebook.com/deedupdex or instagram.com/deedupdex
