- Status
Now I need to build a new wick tonight... this one is definately dead (2 weeks of constant use). Tried to clean it up (dry burn as I did with MAP tanks) but I can see the wick where the coil is has started to break down... no flavor, just a mildly burnt taste.
Ha if I could get more then 3 days I would be extatic I think you are doing well.
And congratz on the new GG
And congratz on the new GG
So the SSGGTS with the TMF inscription must be hit and miss. Mine just says By Imeo. 
also only getting about 3-4 days out of a coil and I only vape at @4v. I take it apart and clean and burn the coil every night to freshen things up. If I don't clean it at night to be ready to go the next day, I'll only get another half days worth until the taste gets really bad.
also only getting about 3-4 days out of a coil and I only vape at @4v. I take it apart and clean and burn the coil every night to freshen things up. If I don't clean it at night to be ready to go the next day, I'll only get another half days worth until the taste gets really bad.
Last edited:
Built a new one, trying the replaceable wick method... but screwed up the resistance. Wanted below 2ohm, ended up with right at about 2ohm (before I finished it). Pulled the coil up as the video said, stuck in the wick, 2.5ohm... way too high, vape is pretty weak (still good vapor, but almost no flavor and cold). Need to get more NR before I try again, only have enough for one more. Only vaping at 3.7, all I've got are 18490, 18650 (AW IMR for both) and CR123A (3.7).... own a Provari and Buzz, hence those are the only batteries I have on hand... 7.4v is WAY too much.
Mine says By Imeo on one side, and TMF on the other
Mine says By Imeo on one side, and TMF on the other
1377 TMF here. My fiancé bought it for me after seeing me sell off everything else. Shes so sweet . Plus she caught me smoking an analog .
I did not request a TMF so I was worried about getting my iatty on it bit it fits perfect using a 510-901-901-510 adapters. I'm glad I got this version the engraving is beautiful.
My first Ggts so it was a
Little confusing figuring out what does what but it is amazing.
Few questions though, how do you use a 306 atty with this? and how tight do u make the bottom tube with the battery as I don't want to screw it too tight.
Ty Imeo.
. Plus she caught me smoking an analog . I did not request a TMF so I was worried about getting my iatty on it bit it fits perfect using a 510-901-901-510 adapters. I'm glad I got this version the engraving is beautiful.
My first Ggts so it was a
Little confusing figuring out what does what but it is amazing.
Few questions though, how do you use a 306 atty with this? and how tight do u make the bottom tube with the battery as I don't want to screw it too tight.
Ty Imeo.
Last edited:
Mine came with two..
1377 TMF here. My fiancé bought it for me after seeing me sell off everything else. Shes so sweet
I did not request a TMF so I was worried about getting my iatty on it bit it fits perfect using a 510-901-901-510 adapters. I'm glad I got this version the engraving is beautiful.
My first Ggts so it was a
Little confusing figuring out what does what but it is amazing.
Few questions though, how do you use a 306 atty with this? and how tight do u make the bottom tube with the battery as I don't want to screw it too tight.
Ty Imeo.
The 306 does not need an adapter, it is threaded for the 801 and 510 by design, the rethreader is for 808s and 901s. Personally, I use a Cisco LR306 (Avidvaper.com) with one of his extended 306 tips, it works great!
Imeo is on vacation for a few weeks yet, so it may be awhile until you hear from him, although I'm still learning as well, I'll give it a shot...1377 TMF here. My fiancé bought it for me after seeing me sell off everything else. Shes so sweet
I did not request a TMF so I was worried about getting my iatty on it bit it fits perfect using a 510-901-901-510 adapters. I'm glad I got this version the engraving is beautiful.
My first Ggts so it was a
Little confusing figuring out what does what but it is amazing.
Few questions though, how do you use a 306 atty with this? and how tight do u make the bottom tube with the battery as I don't want to screw it too tight.
Ty Imeo.
You can use 306 atties just as you would a 510 atty with the adjustable draw top cap- if you have a 306 drip tip that's the same diameter as a 510/901 atty. You may need one of the longer drip tips. It has to be this diameter so the o-ring in the top cap seals it off just right for the draw ring to function correctly. Otherwise just take off the collection tank with the draw ring on it, pop on your atty and go!
Only tighten the bottom tube as much as you need so your battery makes a good solid contact, no more. Overtightening can definitely cause atty shorts and battery damage.
Cool thanks guys. I need to buy a diff 306 drip tip as I only have the cannons.
Thanks for the advice.
Thanks for the advice.
I emailed Bruce about this before my GGTS arrived and he said to get a 510 to 510 adaptor and then a 510 to 510 "shorty" adaptor this setup is what I use with the Iatty.
I saw him say that as well, but Imeo says in his video to use the 901 rethreader and a 901-510 adapater.
I wonder if the ols center pins are shorter or something because I can't do this on my Alum GGTS I have to use actual adapters.
The Center pin on the TMF's is too short by about 3.5mm to use a rethreader+901-510 adapter to fit your iAtty. I had to swap out the center pin from my SS GGTS and put it into my TMF in order for it to work
Got mine in today, 901-510 works fine as long as you follow the video (remove the 510 cap to the GGTS, took me a minute to figure that out). I also have the two 510 adapters Bruce recommends, but haven't bothered trying since this is working fine and the air flow control works too!
- Status
