Super6's are here! Teaser Pics attached!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
Check out the topic I started here: http://www.e-cigarette-forum.com/fo...ng/55807-batteries-parts-guide-super-six.html
It's many of the sources I used to get parts for my Super Six. Also note that East Mall has the high voltage atomizers too.
David
It's many of the sources I used to get parts for my Super Six. Also note that East Mall has the high voltage atomizers too.
David
I'm confused Dave. Is this whats left after all current preorders are shipped? I placed my order on Nov 17 I believe just a straight up all silver SS with 901 adapter when should it ship by?
Thanks,
Derek
my guess would be that is what is left as he stated once before that it would be enough from the CNC shop to fill all pre-orders with a few left to spare.
The Super6's are in! Keep in mind, these pictures are of the S6's hot of the lathe, even before any polishing or finish work has been done! I'll be spending the next couple of days assembling/polishing them and they should start shipping as soon as tomorrow! If you'd like more information on the Super6 or ordering, please visit: www.supertmanufacturing.com
For those who don't know the Super6 is one of the smallest dual voltage devices on the market, running at 3.7 or 6v (5.7 volts under load) depending on battery configuration.
Though many debate the subjective areas of vapor quality, looks, function etc of the various PV's, one objective area that i have no doubt about, the Super6 is second to none when it comes to quality. The quality, fit, finish, tolerances and design of the Super6 makes the Super6 one of the best PV's available! Each S6 is machined on state of the art high speed swiss CNC machines insuring the best quality possible!
I ordered enough units to have stock on hand after the pending orders are filled, so don't miss out! (expect about a 1 week wait for your order to be filled upon ordering)
Stock update as of 01/14/10 Note: It could take 1-2 weeks for these to ship despite having them on hand as I am in the process of filling the pre-orders which still take a substantial amount of preparation time.
ON HAND:
Super6 Units with Brass 801 adjustable draw adapters
Super6 Units with Aluminum 801 adjustable draw adapters
Brass 801 adjustable draw Super6 adapters
Aluminum 801 adjustable draw Super6 adapters
Aluminum Switches
Brass T-Tips for 510,901 and 801 atomizers.
WE ARE CURRENTLY SOLD OUT OF SUPER6 BRASS 510 AND 901 ADAPTERS, BRASS SWITCHES AND ALUMINUM 901 AND 510 ADAPTERS
Pictures of the S6 Jewels:
Brass and aluminum 801 adjustable draw caps:
S6 brass and aluminum switches:
S6 aluminum and brass adjustable draw caps:
S6 bodies:
Sorting the S6 jewels:
S6 with optional brass t-tip and optional brass caps:
510 Cap:
In hand view (photo courtesy of Zofryer):
Please visit www.supertmanufacturing.com for more details
The quality just oozes superiority over anything I have ever seen available with nothing that could be fairly compared minus type of atty and battery used.
Serious David the build on these is just so above and beyond way beyond being even a Myth
Derek
Thanks Derek, i'm glad you like them! Yes, that is just what will be left over after the preorders are filled
LOL! Most definitely Richie. A piece of brass that will screw with a tight fit like no other.
Bummer looks like no super 6 for me...seems all sold out
So are more units / pieces being machined?
How far out are those pieces?
I thought there were going to be additional units available after filling the pre-orders?
LOL! Most definitely Richie. A piece of brass that will screw with a tight fit like no other.
LOL! Touche, BG.
As a veteran vaper, I've noticed that a tight fit proceeds the dripping of juice -- and in some cases, I'm told, the need to reach for fresh batteries.
There were several extras but they sold out already. At least that's the impression that I got from following the posts in this thread and others.
These do look nice!! Two quick questions for you. 1) If you bought the expensive one (801 adjustable draw) would it work with the 510 cap? and 2) How do you push that button on the bottom? Your little finger?
The adjustable part is inside the 801 cap so you'd just swap out the 801 cap for a 510 one. Only the 801 has the option for adjustable airflow by the way.
And you can press the button with your pinky, ring finger, or inside of your palm if you hold it like a pipe. Check out Dave's other threads on the T1 for an idea.
There are several units left over for sale with 801 adapters in aluminum or brass.
If anyone wants, heavens gifts sells 801 to 510 or 901 adpaters for only 2 bucks a piece.
David
I feel the index finger works the best, not the pinkie. Heaven's gifts sells 801 to 510 adapters for only 2 bucks, so you can use a 510 on an 801 cap
I feel the index finger works the best, not the pinkie. Heaven's gifts sells 801 to 510 adapters for only 2 bucks, so you can use a 510 on an 801 cap
I like the pinky best. This brings up 2.5 questions;
1) Would the adjustable part of the 801 give any benefit if you used an adaptor or would you just want to crank it all the way closed?
1.5) Any thoughts on making adjustable adaptors for the 510/901 or does the airflow on those models make it pointless?
2.) Can I have my SuperT6 now?*
*I swore to myself I wouldn't get all anxious since I already have a T1, but the closer it gets to ship time the antsier I get.
I mean absolutely no offense to this but..that's $15 more to go to an 801 model...then the $2 adapter...and then the shipping for heavens gifts..so to get back to a 510 it'd cost roughly $30 more than usual..
so..when would the next batch possibly be made?
Last edited:
So David, not to be a nag, which I am, sorry. Anyway, what is the shipping status on the Super Six preorders?
Thanks,
David (Not the one who makes the Super Six)
Thanks,
David (Not the one who makes the Super Six)
So there aren't going to be any additional adapters made for the S6?
Or, are they just a few weeks out?
There's no way I'd run a $2 adapter on a device like this.
- Status
Similar threads
