Supreme RDTA by Steam Crave
- Thread starter Petabread
- Start date
- th_trl_thread_readers 0
- Status
I vape 90VG, I chain vape at home and vape for 10minutes every 2hrs at work. I'm sorry my statement upset you but if the tank isn't functioning properly then your wicking is off. That's how it works for every tank.
I have a Bellus, Lemo, Lemo 2, Goblin, Billow V2, Aromamizer, and Aromamizer Supreme. I have had problems with leaking or dry hits with every one of them, other than the Supreme, until I figured out the proper way to build and wick them. This "burping" thing is an issue with building/wicking.
I vape at 95-120w depending on whether I'm running claptons or not..
I think both you guys are right in a way. I've had no issues with both my Supremes. On the other hand I've had issues with my Griffin 25 when other people aren't. What I'm saying is there are reasons one way isn't the right (only) way. We don't all vape the same, use the same builds, same viscosity of juices, and the big one is these tanks aren't exact replicas (tolerances in the machining). The important thing is to find a way that works for you and use it. Just my 
.
Cheers,
Steve
.Cheers,
Steve
So emotional. Calm doon ruhdee. If ur getting dry hits and cannot fix it then learn. If u don't want to learn, then...your my hero (face palm). Just do what you want and let us keep all the stupidity within us.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Actually, it IS physics. Fluid dynamics, electrical engineering and aerodynamics, too. If you have to burp it, the wick is too thick and saturated. E-cigarettes are one of the only industries that introduces airflow, liquid and electrical current all together at one point. BTW, I don't burp it. I built it right.
I burp it because it works for me, I burp it because MY supreme is not wicking efficiently
60/40pg i can do a a straight no burping needed...
But with my max vg EJUICE I just have to see those bubbles on both sides of tank...
2x24g/38gnichrome
Fused CLAPTONS
4/5wraps 2.5mm ID
90-110 watts
COTTON BACON V2.
For me that works, no dry hits, no burnt taste..
Like what I said burping the tank won't hurt, it will probably help, some peeps here tried it and it works...whatever works for you bro
Theres no 1 way!
Agreed 100%, wicking this correctly results in nothing but a fuss free, outstanding vape refill after refill. I've owned a ton of rta's and this has shelved almost everything.
I'm not sure how my wicking matters when the problem happens before liquid even gets down to the reservoir...
This tank is unlike any other tank I have. Once liquid gets through the juice holes, it wicks quite well. My only current solution which doesn't aggravate me too much is having the airflow much tighter than usual - this doesnt make it Wick any more than before, it forces liquid through the juice holes...I'll figure it out
I'm thinking I fiddle with the JFC too much, maybe I create a seal/trapped bubble from opening and closing it so much. I'm going to just leave it open; so far, I see a bubble after every puff I've taken 
I want to reiterate that my issue has/ had nothing to do with wicking, mkay?
I do love this tank, I'm just too fiddly with my gear
I want to reiterate that my issue has/ had nothing to do with wicking, mkay?
I do love this tank, I'm just too fiddly with my gear
I have a bunch of RTA, so I am looking at the supreme objectively.
I use rayon and DIY juice where the flavor is the only PG content. I build vertical fused claptons, I vape at 100-120w on DNA 200s.
The aromamizer supreme is a beast it never runs dry I hit it and hit it to the point where all my other RTAs would be dry as a bone. If you can't get this tank to work for you heaven help you with a Gemini or griffin or v1 aromamizer. I can honestly say I have never gotten a single dry hit from this tank...
I use rayon and DIY juice where the flavor is the only PG content. I build vertical fused claptons, I vape at 100-120w on DNA 200s.
The aromamizer supreme is a beast it never runs dry I hit it and hit it to the point where all my other RTAs would be dry as a bone. If you can't get this tank to work for you heaven help you with a Gemini or griffin or v1 aromamizer. I can honestly say I have never gotten a single dry hit from this tank...
I've been using a griffin actually, works perfectly after I watched a tutorial on poking an air channel into the wick. Heaven didn't help me, a poster on this forum did. Same for EJ helping me with burping my Supreme. That's why I use this forum, people with experience and useful information help me with issues.
And then sometimes I avoid een reading replies to threads I'm in, after my solution is found, because they fill up with comments that seem to say "this hardware is perfect, you're bad at using it"
Like someone said earlier, there are small variations among all tanks of a type, including the Supreme, as well as different vaping styles. I've no doubt many of these tanks work flawlessly for their owners. Mine and EJ's have to be burped. Maybe we hold our mods differently, who knows.
I respectfully submit to the "clan" that it's about the viscosity of the juice when we are beating each other up in a respectful manner. /lol For me:
1. Dual fused claptons so I can be cool like bro ej!. /lol 80% VG juice. KGD wicked the same. Bingo! Perfect and no problems. Coils as close to the edge of the deck as possible so they sit directly above the juice holes with a 3MM bit. Prime and poke! WOW. An xrated build. /lol Poke the juice holes after the prime. Not a drop leaked. Not even perspiration. Love it. Perfect!
2. 50% VG or so. Not so much. El sucko somewhere in the life of the coil. Goes dry. Same variables as number 1 one except dual Kanthal. Burp the Bi___________ to much and it floods given the viscosity. Iv'e tried at least 6 different ways to wick the beast and this is not my first rodeo BUT might be my last on 8-8-16!
I could be wrong so I think the viscosity is everything. Tell me your VG/PG ratio and I could be wrong?
For me:1. Dual fused claptons so I can be cool like bro ej!. /lol 80% VG juice. KGD wicked the same. Bingo! Perfect and no problems. Coils as close to the edge of the deck as possible so they sit directly above the juice holes with a 3MM bit. Prime and poke! WOW. An xrated build. /lol Poke the juice holes after the prime. Not a drop leaked. Not even perspiration. Love it. Perfect!
2. 50% VG or so. Not so much. El sucko somewhere in the life of the coil. Goes dry. Same variables as number 1 one except dual Kanthal. Burp the Bi___________ to much and it floods given the viscosity. Iv'e tried at least 6 different ways to wick the beast and this is not my first rodeo BUT might be my last on 8-8-16!
I could be wrong so I think the viscosity is everything. Tell me your VG/PG ratio and I could be wrong?
- Status
