Svoë Mesto Kayfun III ES Discussion/Questions

[bk78]

I just got my kayfun mini 2.1 in the mail today. I've been using the kayfun clone (Dream) exclusively for the last two months and love the vape and flavor I get out of this cheap little atty. I was hoping the real thing (Kayfun) would improve the taste and vape even more but after vaping on mini for the past 3 hours I find the vapor is a tad bit thicker but the taste is off. Could this be due to machining oil? Should I have wash it first? Secondly, I chain vape (taking 5-8 long drags at a time) and the mini gets real hot after about 4 long drasto point I can feel the burn of the metal drip tip on my lips and I have to put it down to cool down. I want to love the Kayfun so bad but my cheap clone is outperforming this expensive atty. If i can't get these two things resolve classifieds here I come.

Of coarse you should clean it first as you should do with all new atomizers. Machine oil does kinda make your juice taste odd

 

[tenshi]

Fed71, I've been setting it up with spiral, then laying them in a "s" shape making sure the ekowool isn't going down the grooves but across them. Kind of like how the user manual suggests. Do you find this way to be even better? Thanks.

 

[tim_man]

It takes a bit of practice to get the kayfun set up properly. I wouldn't just sell it without experimenting a bit.

I just got my Kayfun mini 2.1 in the mail today. I've been using the Kayfun clone (Dream) exclusively for the last two months and love the vape and flavor I get out of this cheap little atty. I was hoping the real thing (Kayfun) would improve the taste and vape even more but after vaping on mini for the past 3 hours I find the vapor is a tad bit thicker but the taste is off. Could this be due to machining oil? Should I have wash it first? Secondly, I chain vape (taking 5-8 long drags at a time) and the mini gets real hot after about 4 long drasto point I can feel the burn of the metal drip tip on my lips and I have to put it down to cool down. I want to love the Kayfun so bad but my cheap clone is outperforming this expensive atty. If i can't get these two things resolve classifieds here I come.

 

[Jacoji]

The gamma/brushed finally completed its 18-day journey from Germany today.

For the new Kayfun I used the wick that fed71 just posted, only with a single strand of 3mm ekowool. 4 wraps of 0.4mm ribbon kanthal and 1.27 ohms (just where I like it).

(his posted image, not my actual wick)

 

[Larzis]

Well this is a surprise. Checked the status of my Kayfun and it has a status of "released by customs". Was expecting it to sit for at least another week or so.

 

[gh0zt]

mine was "released by customs" on 4/13. wonder how much longer

 

[nilbog]

my beta from svoe order placed on the 4th. acceptance on the 7th. was released by customs on the 19th. and delivered on the 27th

 

[adbakt]

Is there anybody know how we can have a discount code for Kayfun and its accessories? I have registered to svoemesto forum and I have heard that forum members could use a discount code.

 

[leomar]

how it that build working Jacoji.

 

[leomar]

I am really impressed with Kayfun No issues at all.. Something I can get used too again.

 

[Jacoji]

how it that build working Jacoji.

I love that it was a 30-second build. Initial performance seems just as good as the "figure 8", but no results yet for long-term wicking. I'll probably determine that as I work through the night.

 

[badinfluence357]

Kayfun on jm22

Sent from my SCH-R910 using Tapatalk 2

 

[dwcraig1]

Stormy's has Ekowool now
Finally it's sold here in the US

 

[Jacoji]

how it that build working Jacoji.

I love that it was a 30-second build. Initial performance seems just as good as the "figure 8", but no results yet for long-term wicking. I'll probably determine that as I work through the night.

Fat single-strand wick is not wicking as well. I could have cut my ends too short and left too little wick. I will probably stick with the figure 8, as it doesn't take much longer to wrap the wick and coil and the taste & vapor has always been consistent and great.

 

[leomar]

Just curious I seen a picture of the insulators melted on fb (user error maybe) I am thinking he did a .5 or lower. What ohms are you guys running your coils at? I am a sub ohm type of guy.

 

[leomar]

Stormy's has Ekowool now
Finally it's sold here in the US

very pricy indeed. btw how are the swells in ib?

 

[dwcraig1]

very pricy indeed. btw how are the swells in ib?

I'm 6 blocks from the beach and havn't been down there in years

 

[Thorbear]

Just curious I seen a picture of the insulators melted on fb (user error maybe) I am thinking he did a .5 or lower. What ohms are you guys running your coils at? I am a sub ohm type of guy.

I do a 4 wrap of 30g on a double 3mm silica, usually end up around 1.1-1.3 ohms.
I usually go a little lower than that on gennies, but I seem to like this setup on the kayfun.
Melted insulators could also be caused by poor wicking causing excess heat, not necessarily the low ohm coil by itself. If there was enough juice flow, the insulators might have been able to handle it. This is pure speculation on my part of course.

 

[9ball_AJ]

Kayfun on jm22

Sent from my SCH-R910 using Tapatalk 2

I have been really impressed with this combo. The look, feel and performance are all fantastic!

 

[hippieben]

I have been really impressed with this combo. The look, feel and performance are all fantastic!

That looks awesome! I'm waiting on a polished paps, and I don't know how I'm going to feel about having a brushed atty on top.