You don't. You just sit the beauty ring on top of it (around it) then screw your atomizer on top. It won't move around because it's sandwiched in between the Provari and your atomizer.
Svoë Mesto Kayfun III ES Discussion/Questions
- Thread starter BoyNamedStacy
- Start date
- th_trl_thread_readers 0
- Status
With the exception of the Hippo from Atmistique, all other provari rings are simply, drop in place and mount the atty.
- Andy . . . Don't let the Ciggieman getcha . . . vape'em.
- Andy . . . Don't let the Ciggieman getcha . . . vape'em.
No, no, no! Do not remove anything. Just ring put on top.
Oh, wow, interesting. If it just seats on top it it, how does it cover the original ring without sticking out? In other words, to cover the original, I would think that it has to be larger in diameter than the original and the body, but in the picture, it seems to be perfectly fitted. What am I missing?
In any case, who has them in stock?
Here is a pic of one I have coming from Gr Modders. Notice the small inner lip.
- Andy . . . Challenge the day.
- Andy . . . Challenge the day.
I got my Kayfuns yesterday! 40 dayss and 40 nights... hahaha
I haven't had a chance to use them yet, but will be doing so this weekend.
I am surprised that the brushed finish looks so dark. I don't think I have anything that quite matches. The beta finish is bead blasted, right?
I haven't had a chance to use them yet, but will be doing so this weekend.
I am surprised that the brushed finish looks so dark. I don't think I have anything that quite matches. The beta finish is bead blasted, right?
Ahhhhhh my vaperv order finally went through after 6.5 hours of hourglasses and error messages...
Here is a pic of one I have coming from Gr Modders. Notice the small inner lip.
- Andy . . . Challenge the day.
I like number 1 whats the website?
Sent from my KFTT using Tapatalk 2
Iv got the Kayfun beauty ring, its not flush, it leaves a slight gap so it rattles. Iv adjusted the Positive post on the kayfun as much as I can, there's still a gap. It's fine though, it works great with my hippo.
Mr. Mesto is a Friggen Genius! Weather by design or happy accident this thing un-fludable. Today was it's first taste of the great High desert out doors. Every device I have used to date, cartos, clearos, Killer 705, Term C, everything has started to flood after being out side in the 110 degree plus heat. I've uptted the VG percent in my juice but everything eventually floods, leaks, gurgles and just becomes a general mess. It was 119 degrees today and I was out side all day. My Kayfun ate it up, no leaking, weeping, not even a gurgle. It's was kind of anticlimactic. I pulled the catch cup off to see if maybe all the leaked juice ended up there, nope, bone dry. I got the exact same vape as I got in 72 degree air conditioning. The draw just amazes me, you would think that by opening the draw it would get airy and vise versa. But that's not the case at all, it's still the same vape and all that's being changed is how less or hard you have to suck. Simply amazing. Iv got mine dialed in so it mimics the draw I had with the cigs I smoked. It's actually kind of comforting, I feel less like I'm vaping and more like I'm smoking. It does a lot better job at stopping the craving. I have always got the nic I've needed but always felt like something was missing and still craved a cig. With the kayfun I feel as satisfied as if I had just smoked a cig.
Mr. Mesto is a Friggen Genius! Weather by design or happy accident this thing un-fludable. Today was it's first taste of the great High desert out doors. Every device I have used to date, cartos, clearos, Killer 705, Term C, everything has started to flood after being out side in the 110 degree plus heat. I've uptted the VG percent in my juice but everything eventually floods, leaks, gurgles and just becomes a general mess. It was 119 degrees today and I was out side all day. My Kayfun ate it up, no leaking, weeping, not even a gurgle. It's was kind of anticlimactic. I pulled the catch cup off to see if maybe all the leaked juice ended up there, nope, bone dry. I got the exact same vape as I got in 72 degree air conditioning. The draw just amazes me, you would think that by opening the draw it would get airy and vise versa. But that's not the case at all, it's still the same vape and all that's being changed is how less or hard you have to suck. Simply amazing. Iv got mine dialed in so it mimics the draw I had with the cigs I smoked. It's actually kind of comforting, I feel less like I'm vaping and more like I'm smoking. It does a lot better job at stopping the craving. I have always got the nic I've needed but always felt like something was missing and still craved a cig. With the kayfun I feel as satisfied as if I had just smoked a cig.
Not sure if thread search is working, searched for 'whistle' and 'whistling' without any results. I'm getting a whistle with my Kayfun 3.1 ES unless I have the draw adjustment set really tight. I tried blowing into the air intake thinking there might be some liquid there, but that didn't seem to do any good. Any ideas on what might be causing this? It's driving me nuts, but the quality of vapor is much better with a looser draw.
Mine does not sound like a real whistle, but during the draw, it is clearly audible. It kind of sounds like a muted, "thin" whistle, I guess. I thought it was normal.
Yeah, that's the sound I have. It's not loud like a warning whistle, it sounds like wind whistling, but a bit higher pitched.
Mine also makes the sound. Hardly even notice it after a week of use. And it has yet to flood or give me a dry hit. Buy one Now if you havent its a winner.
quick question for you guys, i got one coming but i cant find info on how the tanks stack.
i know they have the longer piece for inside and all that but how do the actual tanks stack if they all have the same threads?
i know they have the longer piece for inside and all that but how do the actual tanks stack if they all have the same threads?
The middle section that comes with your Kayfun has a male thread on both ends, the longer sections that go on the ends are female threaded at both ends, you use the short male piece to connect the longer female sections.
sounds right but counting the pieces in a normal kayfun going m to f to m to f doesnt add up if adding more male threaded tanks. im trying to find out how to make it bigger then stock not put it together.. several places sell the extension for the inside and just say stack the male threaded tanks and i just dont see how.
i probably wont do it it but its one of those lack of information things that has my curiosity peaked now.
Last edited:
If you add another male section you have to add another female section. Your tank has to have female threads on both ends, the base and top cap have male threads.
this is what i figured, what i dont see is female sections for sale with the extra tanks so i was kinda lost why places sell the extension and extra tank pieces and say tada your done. so i said hmm maybe too much vapor today and i just dont see it when i look at the picture lol
- Status
Similar threads
