SX350 USB window size

[blueGrassTubb]

Can anyone specify the size and dimensions to cut for the USB port and screen with the SX350? I can measure it, but I don't know if there needs to be extra clearance for one reason or another.

I can't find the specs anywhere.

YiHi has done a spectacular job of building a board that should be simple for even those of us who are beginners, but the lack of any documentation with basic information such as this is VERY frustrating.

Why would they not include a basic wiring diagram and exact specs to cut windows? It's just lazy.

 

[dr g]

You buy a chip straight out the motherland, you get to deal with that.

 

[TheBoo]

News - Differences between SX300 & SX350

Says to e-mail them for dimensions

 

[NickWhit1992]

Can anyone specify the size and dimensions to cut for the USB port and screen with the SX350? I can measure it, but I don't know if there needs to be extra clearance for one reason or another.

I can't find the specs anywhere.

YiHi has done a spectacular job of building a board that should be simple for even those of us who are beginners, but the lack of any documentation with basic information such as this is VERY frustrating.

Why would they not include a basic wiring diagram and exact specs to cut windows? It's just lazy.

I emailed them about the dimensions a couple days ago, I can post the reply here when they get back to me, if you haven't figured it out by then. I'm lazy and don't know much about mod building, nor do I have access to the equipment to fabricate a proper body, so I'm going to try to retrofit an SX300 mod with a 350.

Current vape:
Innokin iTaste VV v3
PT2m w/ 0.8 ohm 32g 5 wrap parallel micro coil at 11w
Local juice

 

[TheBoo]

That was originally my plan, but the guy from eciggity smaller e-mailed me back and said the 350 chip is longer than the 300 so he wasn't sure if it would fit...

I also wasnt sure how easy it would be to take apart and didn't want to spend like 180 in two things that don't go together

 

[NickWhit1992]

I've compared photos of the two, and it looks longer at the bottom. But the top seems to be about the same. I figure I might be able to hit the mod with a Dremel and shave off a bit to make room for the 350, if there's not enough room for it already. I won't be getting the chip until I've disassembled my Seven-30 though, just to make sure I have room to play with.

Current vape:
Innokin iTaste VV v3
PT2m w/ 0.8 ohm 32g 5 wrap parallel micro coil at 11w
Local juice

 

[alee132]

image upload no compression

Took me a min to figure out how to post this but this should be what your looking for I hope. It took me forever to track this down when I was looking for it. Joined a group on facebook called sx350 modder's group. It's been ton's of help. People there are great and respond quickly.

 

[blueGrassTubb]

Thanks! I appreciate it.

 

[NickWhit1992]

That was originally my plan, but the guy from eciggity smaller e-mailed me back and said the 350 chip is longer than the 300 so he wasn't sure if it would fit...

I also wasnt sure how easy it would be to take apart and didn't want to spend like 180 in two things that don't go together

Alright, they're the same width, and the 350 is 6mm longer. From the screen to the top of the board is 5.3mm on the 350, not sure for the 300 but they look about the same to me.

Current vape:
Innokin iTaste VV v3
PT2m w/ 0.8 ohm 32g 5 wrap parallel micro coil at 11w
Local juice

 

[AnsonJames]

image upload no compression

Took me a min to figure out how to post this but this should be what your looking for I hope. It took me forever to track this down when I was looking for it. Joined a group on facebook called sx350 modder's group. It's been ton's of help. People there are great and respond quickly.

Can't find that modders group - got a link?

 

[NickWhit1992]

Can't find that modders group - got a link?

https://www.facebook.com/groups/1430882353833639/

Current vape:
Innokin iTaste VV v3
PT2m w/ 0.8 ohm 32g 5 wrap parallel micro coil at 11w
Local juice