SXK Billet box...

[charlie1465]

I still can't get a decent vape of those EUC coils. So tiny, they're so hard to install, even with a pair of pliers. I have several, including the one from FF. Here I found another, maybe it'll work!

Unilink

Do you have the MF bridge. It's a breeze you just pop the coil into the small sized cup and fit it through the positive (bottom) hole in the boro. Then insert the long chimney in from the top click in place and boom.

Then fill insert boro and enjoy

 

[Susaz]

It's odd they make a Nautilus bridge when all the BB devices already come with one, unless other boro tank devices don't have one?

original BBs don't come with a Nautilus Bridge. SXK was the first one to include it.

 

[Susaz]

It was oversubscribed as usual so some didn't win through. They decided to do 450 units but I know that there were over 650 who signed up.

You were list 2 right?

I signed up mid August, as soon as I saw Todd's review.

 

[Susaz]

Do you have the MF bridge. It's a breeze you just pop the coil into the small sized cup and fit it through the positive (bottom) hole in the boro. Then insert the long chimney in from the top click in place and boom.

Then fill insert boro and enjoy

Not a very steady hand. Three parts, pop the tiny coil plus the top... puff, the coils are too small.

 

[charlie1465]

I signed up mid August, as soon as I saw Todd's review.

Yep so that's the same list as me.....number 2. If you go to the fb group you'll see the final list which has all the winners stated.

There was also a request to pay and then some had to give further details on their accounts to validate their identities.

I would check it
Hope you get it sorted.

 

[b.m.]

Ok,i've searched this thread all over and can't find an answer,what coils is the Kanger bridge that comes with kit for?I think i remember seeing it was for the ssocc coils but i don't remember.I'm getting ready to order some,but don't want something that doesn't fit.

 

[dwcraig1]

Ok,i've searched this thread all over and can't find an answer,what coils is the Kanger bridge that comes with kit for?I think i remember seeing it was for the ssocc coils but i don't remember.I'm getting ready to order some,but don't want something that doesn't fit.

Both styles

 

[dwcraig1]

View attachment 836395 View attachment 836397
Both styles

I would recommend going with an A tank and Atlantis/Triton and compatible coils.

 

[Fredman1]

I'm not getting notifications for some reason

Me to. Now i'm way behind, and have to backtrack.
I see the Haku zeta is available at 3F...
Buy YFTK Haku Xeta Inside Style RBA SS Ultem Atomizer for BB Box Mod
Only on pre order atm. Hate that !!!

 

[Fredman1]

I received the Aspire 0.7ohm mesh coils, but can't get them to fit inside the boro or A tank. Now i'm doubting whether it can be used with the BB...?

 

[Nailz]

I received the Aspire 0.7ohm mesh coils, but can't get them to fit inside the boro or A tank. Now i'm doubting whether it can be used with the BB...?

I've been using the Aspire Mesh 0.7 ohm coils in my BB for over a month, using the standard boro with aspire bridge that came with the SXK BB

 

[FLICK]

I received the Aspire 0.7ohm mesh coils, but can't get them to fit inside the boro or A tank. Now i'm doubting whether it can be used with the BB...?

They "should" fit in the Nautilus bridge.. but, I had an issue with mine, the knurled part at the top of the coil above the treads seemed to foul inside the SXK bridge so I couldn't screw them in, (The inner diameter of the SXK bridge seemed slightly on the small side)... I ended up having to run a round file through the inside of the bridge to make it a slightly larger diameter to get the coils to screw in...

 

[b.m.]

I would recommend going with an A tank and Atlantis/Triton and compatible coils.

Yeah,i've tried some that fit the A tank,3 different euc coils and the ec-m coils.I didn't care for the euc's much,i did like the ec-m's though.I plan to get the Triton rba as well,but just trying out different pre built heads to see which ones i want to stock up on for those lazy days haha.I remember the square subtank coils were decent back when i used a subtank,so i'll be giving the round ones a try,Central vapors has them for $1.59 a coil,so i can grab a couple to try out cheap.Actually they have a bunch of different coils they sell individual,so i'll start trying a few different ones each week.

 

[Fredman1]

I've been using the Aspire Mesh 0.7 ohm coils in my BB for over a month, using the standard boro with aspire bridge that came with the SXK BB

They "should" fit in the Nautilus bridge..

Problem is the bottom collar of the coil don't slide through the o ring in the boro tank. I have to force it.
Thanks guys, i'll put some more effort into it.

 

[Fredman1]

Got it in, after damaging one coil. This one is not straight forward. I had to drop the coil/collar in from the inside, and screw the bridge from the outside onto the coil...not easy.
But its working.

 

[Nailz]

Got it in, after damaging one coil. This one is not straight forward. I had to drop the coil/collar in from the inside, and screw the bridge from the outside onto the coil...not easy.
But its working.

Yes that is the way I do, it is a bit of PITA, but get use to it after a few times.

 

[gsmit1]

My Crossbow clone got here.

 

[FLICK]

Got it in, after damaging one coil. This one is not straight forward. I had to drop the coil/collar in from the inside, and screw the bridge from the outside onto the coil...not easy.
But its working.

Glad you got it in the end...

From:
~The Billet Box~ page 1559 continued...

There's a complete pictorial a couple of pages before that:
~The Billet Box~ page 1559 continued...

 

[Fredman1]

My Crossbow clone got here.

Let know your thoughts plz.

 

[gsmit1]

Let know your thoughts plz.

I will do that. It'll probably be a little while before I can get to it though.