- Status
In my quest to locate my Vapeshell I discovered that I also have a Crossbow....all styled of coarse.
My vapeshell is one of those that were engraved incorrectly so one engraving in the back and one facing front, at least I remembered about that.
The Bantam went through the washing machine a couple years back and like a dummy I popped in a fresh battery while wet inside. It proceeded to make magic smoke but I got the battery out before it burnt up...I think. It smelled to bad for a long time, OK now. I may have a problem with the battery draining while sitting, I'm looking into that now. It appears to Work OK otherwise.
My vapeshell is one of those that were engraved incorrectly so one engraving in the back and one facing front, at least I remembered about that.
The Bantam went through the washing machine a couple years back and like a dummy I popped in a fresh battery while wet inside. It proceeded to make magic smoke but I got the battery out before it burnt up...I think. It smelled to bad for a long time, OK now. I may have a problem with the battery draining while sitting, I'm looking into that now. It appears to Work OK otherwise.
Seems like that's the first thing to go on the SEVO boards. I've had a couple of SEVO 70s (a Supbox and a BB) that have that issue.
Last edited:
I dont know if I want to mod my old sxk bb's or use the dna 60's I have on a couple of BXR's. I dont know what I want anymore besides vape. Im tierd!
Sent from my SM-A526U using Tapatalk
Since there is no USB port on the BXR the existing board may very well work just fine, especially in wattage mode.
My Bantam seems to not be able to put out much power, like 12 - 20 watts. Also the battery does drain while sitting. I shall test the 18350's in my 40 watt Vamo in a few.
Edit: My 3 18350's are fine.
Edit: My 3 18350's are fine.
Last edited:
The Vamo is a KSD, it has a SS 510 with spring loaded center pin and can function as a power bank with the non included 510 to USB adapter.
I doubt if it has much more than 100 puffs on it. It paid $25 for it from Varitube long ago.
I doubt if it has much more than 100 puffs on it. It paid $25 for it from Varitube long ago.
Last edited:
Yes I remember. My Mukey (Vamo double barrel) is also 15 watts. The first Vamo mods were 15 watts (up to v5). 3v to 6v, 3w to 15w.
Last edited:
I'm not sure why but I ordered one. My first purchase from FT without using Paypal. I do know of the work around, BTW.
Pretty good power management on the sevo70.
2.5 days on a single 30q. I could probably get this to 800 before I'm done for the evening.
Love low wattage vaping.
2.5 days on a single 30q. I could probably get this to 800 before I'm done for the evening.
Love low wattage vaping.
whoops forgot photograph proof.
Ohm's are still a little high to maximize battery life. Wonder if I have any wire that will hit .4
Ohm's are still a little high to maximize battery life. Wonder if I have any wire that will hit .4
My Supbox SEVO-70 hits everything at 70 watts regardless of the setting right out of the box. The SEVO-70 in my SXK BB clear acrylic seems fine with about 10 puffs on it. Same for my Bantam SEVO-30.
I brought out my SXK Crossbow and set it up as I do other bridges. For some reason I decided to try it on a regular mod with the chimney on to make sure it wasn't shorted. It was shorting. I had to change the screw on the positive post as it was too fat and shorting on the chimney. After I got it working I didn't like it as it's too restrictive compared to an Insider. Maybe it will be fine in the new Bantam Box at lower wattage.
I'm really digging the Mk mods smoked panel's that 3f sent me..I thought they would be on the lighter side but the dark smoke looks really nice. Its definitely a fingerprint magnet....
Sent from my SM-A526U using Tapatalk
Sent from my SM-A526U using Tapatalk
- Status
