Are you maybe trying to use a 17 x 1.5 mm ??
I said 16 x 1 mm because that is what I used, I didn't have any 17 x 1's but I did try 18 x 1's and they were kind of tight. So it appears that 17 x 1 mm is the recommended size.
Last edited:
- Status
I said 16 x 1 mm because that is what I used, I didn't have any 17 x 1's but I did try 18 x 1's and they were kind of tight. So it appears that 17 x 1 mm is the recommended size.
UGHH yes. Just went and looked at the bag. 17x1.5. Ugghhh. So which do you think I should order? 17x1? or 16X1?
17 x 1 mm, me too, I'm almost out of 16's and have no 17's. I shall probably order both sizes for general use.
I have about 10+ bags of o-rings and NEVER have the right size for my projects. 
It will take around 50 sizes or so to get you pretty well covered, 1 mm thickness 2 - 20 mm ID, 1.5 mm thickness 2 - 20 mm ID and a few 2 mm thickness ones.I have about 10+ bags of o-rings and NEVER have the right size for my projects.
I wish they sold them in smaller bags like 10 for $1.00. By the time you pay the 3.95 plus shipping you've spent about $10 for one little rubber thingy. I will never use a bag of 50
Try here: The O-Ring Store LLC, We make getting O-Rings easy!
If you can order the various sizes that you may need all in one order.
YES! Like this a lot better. Any other random sizes you think I would need. I run a Taifun 1 and 2 and a GS and a Lemo Drop
I only know the size of the one on the Lemo chamber top. 7.5 x1 mm (this is a tad bigger than the supplied one, fits better)
I gave it to a friend so I can't measure the tank end ones.
On TGT II clone with the 2 mm thick tank sleeve a 20 x 1 mm need to used on the top end of the sleeve, same as the bottom one.
If 1 mm thick sleeve then 19 x 1 mm on top end and 20 x 1 mm on the bottom end.
Except for the AFC ring and tank sleeves the rest of the TGT II o-rings are the same TGT.
I gave it to a friend so I can't measure the tank end ones.
On TGT II clone with the 2 mm thick tank sleeve a 20 x 1 mm need to used on the top end of the sleeve, same as the bottom one.
If 1 mm thick sleeve then 19 x 1 mm on top end and 20 x 1 mm on the bottom end.
Except for the AFC ring and tank sleeves the rest of the TGT II o-rings are the same TGT.
I suppose it was just a matter of time before I slotted my Hotcig TGT II. This is the one with removable deck. 3.2 mm wick slots also.
I should probably done it sooner. I'm not sure how I messed up on my coil resistance but I wanted 1.2Ω but got 0.9Ω, that limits me to 22.5 watts instead of 24 watts due to 5 amp limitation. Still use my Eye everyday.
A little modification was needed on the atty's 510 insulator, no more gap.
I should probably done it sooner. I'm not sure how I messed up on my coil resistance but I wanted 1.2Ω but got 0.9Ω, that limits me to 22.5 watts instead of 24 watts due to 5 amp limitation. Still use my Eye everyday.
A little modification was needed on the atty's 510 insulator, no more gap.
Last edited:
It must have been Bill that gave up on the eye.? I remember when you got that, I wanted one so bad. I still have my semovar and think it's one of classier tubes I've ever owned. Would just LOVE a more powerful version.... A new nivel chip is all I need for the upgrade but I guess that guys out of the vape game. At least I never heard anything more about him. (the nivel chip guy)
The new Dicodes have temp control and go up to 40 or 80 watts. I'm definitely picking up the 2380, omgsh soooo seckzi
THE WGU CLUB
Card Carrying Member/Co-Founder
THE WGU CLUB
Card Carrying Member/Co-Founder
Not pictured yet, is the TELESCOPIC 2380 *drooool*
Depending on how it looks, it's the regular 2380 or the Tele, OMGSghhhztyhhj
Edit:
THE WGU CLUB
Card Carrying Member/Co-Founder
Last edited:
The eye had a "facelift" and now delivers 7 amps instead of 5 and has a lower resistance threshold as well as a telescopic body to accommodate all 3 battery sizes. I was going for it till the SXmini hit the market. And I am glad I got the mini. Between it and the Semovar, the provaris, and the futura I think I'm safe...ummm.. for now. ;-) I still find the eye tempting and catch myself every now and then contemplating having a back up box mod.
Sent from my iPhone using Tapatalk
Hate to keep bothering you Daniel but I am making an order at The Orings store and am thinking I might as well get replacements for my GS. Any chance you know the size of these?
Does anyone know what chip is in that dicodes dani device? Is that available anywhere (the chip)
Man, everytime I think I'm done "wanting" something, something new comes along.
I seriously need to quit reading ECF.
The chip is made my Dicodes. Awesome mod and an amazing chip.
- Status
Similar threads
- Locked
