- Status
Yes, in theory, but due to the internal resistance differences between atomizers and electrical continuity efficiency, some atomizers are more stable than others.
For TP to work well, one needs a very stable resistance reading. This isn't always present in clones and even in some hi-end authentics (cough KF4), though people's personal experiences have differed.
In other words, TP performs best when the atomizer has solid connections from the 510 pin to terminal posts.
My authentic TGT2 performs perfectly.
I've used the nano tanks for GT1 with a GT2 base/chimney with great success. The full size orig tanks should work just fine.
Craig can you weigh in here. I know you have clones as well as originals
What if I raise the coil and put that plastic air flow reducer and don't push it but leave it a little elevated. I think that would stop leaking. But I am not sure if it is a good idea to do that.
Thanks Toolman,I ahve finally made 4 of my tanks leakproof,I guess I will not take them apart for ultrasonic baths,just throw them in as is.I really like the way these GT2 tanks look.But for future reference thats good to know,now I have backups for my backups for the vapeapocilypse.
I did the Royal wire 24g. at 9 wraps 2.4 mm dia.it came out to .4 ohms, fired it up and boy that was amazeing.Get a litle bit of a dry hit if I hit it 5or 6 realfast,but other than that its good. Warmer vape,but it sure makes the flavor better.I am no lnoger a tootle puffer I fear,thanks for the encouragement to move forward with this,although my baterries will need chargeing way more often,It was well worth it.
Just an update. The fact that one of my Taifuns works on all my mods and one does not like the Provari is something that just still stumps me.
I have been trying to get help on FB via Taifun GT page and on Smoker store.de and thru the SmokerStore contact.
To me, more than anything else, customer care and after sales help is THE most important aspect of a product. Sure they can sell you something, they can have an excellent device, BUT if they cant be bothered with a simple question, to reply to emails, FB messages etc. is NOT a good. It leaves a " bad taste" ( pun intended )
I have asked for help in English and in German, they've seen the PMs but no help. Maybe its a "German thing" Its too bad because the atomizer is top quality and tops in taste. These little things eat away on my mind and will probably end up with me ridding myself of them because everytime I see it or use it, I will be thinking that the modder doesnt give a ....
Just had to vent.
I have been trying to get help on FB via Taifun GT page and on Smoker store.de and thru the SmokerStore contact.
To me, more than anything else, customer care and after sales help is THE most important aspect of a product. Sure they can sell you something, they can have an excellent device, BUT if they cant be bothered with a simple question, to reply to emails, FB messages etc. is NOT a good. It leaves a " bad taste" ( pun intended )
I have asked for help in English and in German, they've seen the PMs but no help. Maybe its a "German thing" Its too bad because the atomizer is top quality and tops in taste. These little things eat away on my mind and will probably end up with me ridding myself of them because everytime I see it or use it, I will be thinking that the modder doesnt give a ....
Just had to vent.
Have you tried adjusting the atty's 510 screw out a bit? What message does the mod say?
^^^ I seem to recall you saying that one doesn't want to screw on.
Yes , Ive tried the 510 adjustment, but its a lot of a gap. I finally got some response from SmokerSt and they want me to send the base in so they can check it out. As soon as I get the address I will send it in.
Here is the photo
Here is the photo
^^^ so the problem is it doesn't screw in all the way, When I get to work, I'm going now, I"ll send a PM
There's four TGT 2's not pictured but here are my main squeezes depending on what year it was.
On the left, MKB-TS (GGTS clone) with some type of Ody like atty (various parts). 2.5 year ago roughly.
CenterTaifun "the Eye" 1.5 year old tech
My DIY Squonker flask with Evolv 40 board, current but fading fast, the 200D was to be released yesterday.
On the left, MKB-TS (GGTS clone) with some type of Ody like atty (various parts). 2.5 year ago roughly.
CenterTaifun "the Eye" 1.5 year old tech
My DIY Squonker flask with Evolv 40 board, current but fading fast, the 200D was to be released yesterday.
Check the RTA thread
It releases tomorrow btw, check the video I posted out too for a close look.
It's wicks just like a FeV, but with PTFE tubes too, or cotton, or cotton donut pad, omgsh
THE WGU CLUB
Thanks dems buddy... I will be ready with my money....
I didnt think Id want it, but I thought DOH, I could use it on my 22mm devices... I hope it has a dripper set up. Im in love with the TGT2 dripper kit.
I didnt think Id want it, but I thought DOH, I could use it on my 22mm devices... I hope it has a dripper set up. Im in love with the TGT2 dripper kit.
I posted a pic of the dripper setup too, lol
I'll be ready also, it looks so cool
It's only 109 euros after VAT removal, seems like a good deal to me
THE WGU CLUB
I am just perplexed by the on going burning hits from my TGT2's. Does not happen with the TGT1 or the one that came out in the middle of the two. Did Craig call it as GS? Anyway....
I thought I needed to dremel out the wick slots but they are the same size on the 2 as they are on the 1. Did not change it because I do not want a leaking problem
I use mostly 50/50.
Could it be because I made bigger coils on the 2's?
I used to only use .70 bit and make a 1.5-1.7 coil.
I started using a bigger bit 2.4 (ish) because I thought I was supposed to with TGT2 due to more air flow.
Any advice?
I thought I needed to dremel out the wick slots but they are the same size on the 2 as they are on the 1. Did not change it because I do not want a leaking problem
I use mostly 50/50.
Could it be because I made bigger coils on the 2's?
I used to only use .70 bit and make a 1.5-1.7 coil.
I started using a bigger bit 2.4 (ish) because I thought I was supposed to with TGT2 due to more air flow.
Any advice?
- Status
Similar threads
- Locked
