Taifun GT Discusion!

Status
Not open for further replies.

ccwaters

Ultra Member
ECF Veteran
Verified Member
Aug 31, 2013
1,779
4,426
Minnesota USA
If anyone is still looking for a TGT2 Tobeco TAIFUN GT 2 RBA REBUILDABLE ATOMIZER TOBECO CLONE Coupon Code= "50CLEARANCE" Puts it in your cart for under $9 and if you get the total to $20 before coupon code it also ships free. Everything in the clearance section is half off, but its getting fairly picked over.
 

mattymatt82

Super Member
ECF Veteran
Verified Member
Mar 14, 2012
809
1,078
Kansas City
  • Like
Reactions: TrollDragon

Phone Guy

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2013
3,202
5,826
Arlington, Texas - USA

petemoss

Super Member
ECF Veteran
Verified Member
Nov 16, 2013
661
1,299
Queens, NY
What a deal. What a tank. Absolutely one of my all time favorites.

Rats! I just got a Tobeco TGT2 but at the regular price. Haven't even built it yet, but I noticed that the inner sleeve (with the wick holes) pushes down and stops. The old TGT2 sleeve didn't stop and could be pushed down too far. Good improvement!

Now it just needs something to keep the sleeve from turning when you go to tighten the top cap.
 
Last edited:
  • Like
Reactions: TrollDragon

ccwaters

Ultra Member
ECF Veteran
Verified Member
Aug 31, 2013
1,779
4,426
Minnesota USA
Just when I thought I had all of the Taifun type atties I need! What do you think they go and do?

cnBWcDO.jpg



22mm, top fill, screws together, glass tanked Hurricane 316 SS for 22 bucks, wish China would do this sort of thing more often, rather then make straight copies.
 

Phone Guy

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2013
3,202
5,826
Arlington, Texas - USA
Rats! I just got a Tobeco TGT2 but at the regular price. Haven't even built it yet, but I noticed that the inner sleeve (with the wick holes) pushes down and stops. The old TGT2 sleeve didn't stop and could be pushed down too far. Good improvement!

Now it just needs something to keep the sleeve from turning when you go to tighten the top cap.
That's what the oring is for. If your moving the sleeve when tightening the cap, your oring is too loose or your applying way too much force, lay off the spinach ;)

In my experience, the oring on the cap (that seats against the collapsible sleeve) Does most of the work so you don't have to crank it down, just make sure it seats properly against the sleeve. Ymmv
 

Phone Guy

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2013
3,202
5,826
Arlington, Texas - USA
Just when I thought I had all of the Taifun type atties I need! What do you think they go and do?

cnBWcDO.jpg



22mm, top fill, screws together, glass tanked Hurricane 316 SS for 22 bucks, wish China would do this sort of thing more often, rather then make straight copies.
You and me both brother. I've been trying to resist buying more of the same style tanks (taifun) not because I don't like them, but because that's almost all I've used for so long I wanted to try other designs, concepts, etc... I stayed on the fence about the gs2 and GSL for weeks. I got the GSL, the day after I ordered it someone mentioned it didn't perform to the same level as the gs2 (yes I'm looking at you Daniel ;) ), so I ordered the hot cig gs2 22mm also now... Plus I've got several gt1 and gt2.... And I've been eyeing the hurricane too, but it looks to be inspired by the "ty foon"...

So I tried branching out, got a crown, aromamizer, and a gem lately... The aromamizer is a cloud blowers tank, which is ok. The crown with its premade Coils is another cloud tank (loud too), the gem is a very restrictive MTL tank, not impressed with it, it feels tighter than my kfl, gt1 by quite a bit.

So, unless someone orders the hurricane and posts a comparison to the taifun series, I'll wait. How many $25 attys can anyone keep in vape storage? :) I never felt like that before, but here lately I truly feel it's just wasting money. Buying tanks to play with for a day or two and retire, then go back to reliable, works great, satisfying tank you've had for months again. :(
 

dwcraig1

Vaping Master
ECF Veteran
Verified Member
Mar 17, 2012
9,013
49,290
Imperial Beach, California
You and me both brother. I've been trying to resist buying more of the same style tanks (taifun) not because I don't like them, but because that's almost all I've used for so long I wanted to try other designs, concepts, etc... I stayed on the fence about the gs2 and GSL for weeks. I got the GSL, the day after I ordered it someone mentioned it didn't perform to the same level as the gs2 (yes I'm looking at you Daniel ;) ), so I ordered the hot cig gs2 22mm also now... Plus I've got several gt1 and gt2.... And I've been eyeing the hurricane too, but it looks to be inspired by the "ty foon"...

So I tried branching out, got a crown, aromamizer, and a gem lately... The aromamizer is a cloud blowers tank, which is ok. The crown with its premade Coils is another cloud tank (loud too), the gem is a very restrictive MTL tank, not impressed with it, it feels tighter than my kfl, gt1 by quite a bit.

So, unless someone orders the hurricane and posts a comparison to the taifun series, I'll wait. How many $25 attys can anyone keep in vape storage? :) I never felt like that before, but here lately I truly feel it's just wasting money. Buying tanks to play with for a day or two and retire, then go back to reliable, works great, satisfying tank you've had for months again. :(
Sounds about the way it works for me also.
 

chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,028
85,296
Burbank CAlifornia
You and me both brother. I've been trying to resist buying more of the same style tanks (taifun) not because I don't like them, but because that's almost all I've used for so long I wanted to try other designs, concepts, etc... I stayed on the fence about the gs2 and GSL for weeks. I got the GSL, the day after I ordered it someone mentioned it didn't perform to the same level as the gs2 (yes I'm looking at you Daniel ;) ), so I ordered the hot cig gs2 22mm also now... Plus I've got several gt1 and gt2.... And I've been eyeing the hurricane too, but it looks to be inspired by the "ty foon"...

So I tried branching out, got a crown, aromamizer, and a gem lately... The aromamizer is a cloud blowers tank, which is ok. The crown with its premade Coils is another cloud tank (loud too), the gem is a very restrictive MTL tank, not impressed with it, it feels tighter than my kfl, gt1 by quite a bit.

So, unless someone orders the hurricane and posts a comparison to the taifun series, I'll wait. How many $25 attys can anyone keep in vape storage? :) I never felt like that before, but here lately I truly feel it's just wasting money. Buying tanks to play with for a day or two and retire, then go back to reliable, works great, satisfying tank you've had for months again. :(
Exactly why I do not branch out (too much) from Taifun home. Plus I hate learning new gear and all those parts :facepalm:
 

roxynoodle

Unregistered Supplier
ECF Veteran
Jun 19, 2014
15,344
37,213
Ohio
Just when I thought I had all of the Taifun type atties I need! What do you think they go and do?

cnBWcDO.jpg



22mm, top fill, screws together, glass tanked Hurricane 316 SS for 22 bucks, wish China would do this sort of thing more often, rather then make straight copies.

Where did you find that?
 

ccwaters

Ultra Member
ECF Veteran
Verified Member
Aug 31, 2013
1,779
4,426
Minnesota USA
Same Atty, just a different metal tank shield on it, if you look at Alibaba, that is where I grabbed the pics. Ali pics show both tank types, but on different atomizers.

Hurricane is 23mm, the storm is listed as 22mm, doubt it will fit, but maybe. Vapejoy does also make the straight Hurricane clone, so, who knows.
 
Status
Not open for further replies.

Users who are viewing this thread