Tank question

[simplesid242]

I plan to pick up a couple new tanks. I'm looking at some pro tanks. So which would be a better option? Protank 2 or 3 ? Or mini. Capacity does not matter. I also plan to rebuild. Which would be easiest ? Will be my first rebuild. I've watched some videos and looked around forums here. So I've gotten familiar with how is done. Thanx for any advice.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[dice57]

If you want to rebuild, go with a decent rba. Can get a decent clone for a reasonable price. kayfun, Russian, Taifun, Flash-e-vapor V2, just to name a few.

 

[State O' Flux]

Dice57's advice is well considered. An RTA, such as the "best of" list provided, offers a much larger and easier to work with build deck than the small, clearomizer based, glassomizer coil head found in the Kanger PT series.
If you must start with a replaceable coil head atomizer, I'd recommend waiting for the Kanger Aerotank Mega and Mini to become available... as they may prove to be the very best of their kind, both now, and for a good time to come.

Point of fact, they tempt me... a devout RTA/RDA user.

 

[matija]

Protank 3 because of Pyrex Glass + get Aerotank base which has better air control on it.

 

[EBates]

The protank 2 might be a better choice since it is single coil. Don't think I've seen anything on rebuilding the PT3 dual coils yet.

 

[djsvapour]

mini!

The other ones are not welcome in my vape box.

 

[simplesid242]

Thanx for recommendations. I got a New Kayfun Lite Plus 3.1 Russian 91%. And 2 Protank 2's

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[simplesid242]

Was looking at the new Protank also. Will prob get one when they come.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[Frenchfry1942]

I think the Protank 2 and the Protank 3 have small differences. Both are respected.

For me, I did, initially, make sure that all my tanks used the same coil set-up. Made things simpler. The PT2 and PT3 use different coils. I suggest either one or the other.

Hope helps

 

[GeorgeWachsmuth]

The protank 2 might be a better choice since it is single coil. Don't think I've seen anything on rebuilding the PT3 dual coils yet.

Rebuild it with a single coil and a good flavor wick. Use cotton.EZ to do.....

 

[GeorgeWachsmuth]

Thanx for recommendations. I got a New Kayfun Lite Plus 3.1 Russian 91%. And 2 Protank 2's

Sent from my SAMSUNG-SM-N900A using Tapatalk

Frankly...after getting and using my Kayfun and some dripping RDAs only a dire emergency would have me using my Protanks.

 

[kachuge]

The protank 2 might be a better choice since it is single coil. Don't think I've seen anything on rebuilding the PT3 dual coils yet.

protank mini 2 sells for about $19 and comes with two burners......... can't beat that........ and i'm liking mine.....

 

[denno612]

I plan to pick up a couple new tanks. I'm looking at some pro tanks. So which would be a better option? Protank 2 or 3 ? Or mini. Capacity does not matter. I also plan to rebuild. Which would be easiest ? Will be my first rebuild. I've watched some videos and looked around forums here. So I've gotten familiar with how is done. Thanx for any advice.

Sent from my SAMSUNG-SM-N900A using Tapatalk

try the protank 2,buy some coils,go on youtube and learn how to make micro coils, wick them with cotton and enjoy,
oh and pick yourself up a kayfun lite and get the most out of your favorite juice,they are worth it!