Tatroes 50w atlas box mod: any owners out there

[reeftivo]

The gravity sensor works, but it is no bueno with a filled Magma or any other rda that leaks out the air holes when you tilt them to one side.

I don't play with my wattage all that much when using the Atlas, so not an issue for me. As for leeking attys, that will be an issue with most rda on side door box mods. I just use my low leak risk rda attys like my veritas, origen etc. Right now using my 454 with no issues. I drip with my caps off so I can see the saturation. Helps me avoid overfill

 

[Hill]

Well I don't have an Atlas didn't want to pay that much. So I decided to just buy the chip and make my own and ended up spending around the same amount after tools, sanding paper, soldering iron, wood etc lol.

On the plus side I do have a beautiful new wood mod and the SX350 chip is awesome using it with my TOBH and I must say I'm enjoying every minute of it.

Will try to post pics later when the wife gets home with the camera (and if I can figure it out).

 

[peraspera]

I don't own a Tatroe Atlas but have a couple of other SX350 PVs. Out of idle curiosity I did a comparative chart for a few devices to see how their regulated turf compared. I don't know how much it means to others' vaping experiences but I like the idea that I have such a large regulated sandbox in which to play.

 

[reeftivo]

Well I don't have an Atlas didn't want to pay that much. So I decided to just buy the chip and make my own and ended up spending around the same amount after tools, sanding paper, soldering iron, wood etc lol.

On the plus side I do have a beautiful new wood mod and the SX350 chip is awesome using it with my TOBH and I must say I'm enjoying every minute of it.

Will try to post pics later when the wife gets home with the camera (and if I can figure it out).

I'll bet that was a fun build!!

I was looking at piecing one together also but didn't trust my skills or patience.

After I saw that they (cigtechs) were offering a 10off on the $199, I ended paying $186 out the door which was cheaper than my rdna.

 

[reeftivo]

a few pics of mine with the 454 atty

 

[MrOcelot]

Mine is shipped should be here Friday I'm stoked. Used the ten percent off coupon as well. Hopefully my search for a mod beyond my provari is done for now at least. Love my mechs but the drop through out the day is a bummer.

 

[reeftivo]

Mine is shipped should be here Friday I'm stoked. Used the ten percent off coupon as well. Hopefully my search for a mod beyond my provari is done for now at least. Love my mechs but the drop through out the day is a bummer.

Congrats!

You'll like it! I just wish they made skins for it like vaporshark does. I'm scared to mess up the nice anodize on my Atlas. No issues yet but you never know!

I like mine even more than my rdna evolv30.

 

[Cob24]

Congrats!

You'll like it! I just wish they made skins for it like vaporshark does. I'm scared to mess up the nice anodize on my Atlas. No issues yet but you never know!

I like mine even more than my rdna evolv30.

Skins would be nice. I carry mine around in a "vapesox". Fits the mod really well and holds three 15ml bottles up front.
Doesn't do the same as a skin would but I don't mind

 

[ScubaMatt]

a few pics of mine with the 454 atty

View attachment 368289
View attachment 368290
View attachment 368291

The blue looks nice. When I bought mine the only color available was Black. I was looking at the new colors the other day.The blue is what caught my eye. I did the upgrade to 60 watts, before turning up the power I'll rewire it this week. I probably will never use the 60 watts but its nice knowing it's there.

 

[Cob24]

Rewriting seems like a big chore for something you don't intend to use.

I've never gone over 40 watts but I want the upgrade and can't honestly explain why

Would really love to see tatroe build this as a dual 18650 box. After owning the current atlas I'd throw my wallet at them for the extra battery

 

[Misk]

Rewriting seems like a big chore for something you don't intend to use.

I've never gone over 40 watts but I want the upgrade and can't honestly explain why

Would really love to see tatroe build this as a dual 18650 box. After owning the current atlas I'd throw my wallet at them for the extra battery

I am seriously tempted to buy one of these, but I don't know that a single 18650 would get me through a day. I am with you here if someone comes out with something like this with a dual battery I would be all over it.

 

[Cob24]

Gets me through the day. I only vape about 6mls around 28-38 watts. I take it fully charged at 0400 and have to charge it when I get home at 1700.

I can't vape at work though so I get hourly breaks to go and burn through juice.

There are dual 18650 mods out there that I've seen cheaper than the atlas. They have really long waits on them though. The one I'm waiting on is an okr mod, not sx350.

 

[Misk]

That sounds like it would about get me through the day. All the same though having a second battery for that extra assurance would be nice.

 

[Cob24]

Very true. Atlas has a built in charger port though. So when I get below the 3.69 on the screen I'll plug it in while I'm not vaping. That rarely happens for me though.

Yesterday the battery went all day by some magic and I was home. Vaped about 8-10 mls

 

[Misk]

Is it fairly easy to get at the batteries to change them as well? I work in a clean room for 12hrs and not sure how people would feel about me breaking out my box mod to charge it...lol

 

[reeftivo]

I would also like a dual 18650 but so far I've been fine with the single batt on the Atlas.
the buck/boost on the sx350 really works well. I am a bit of a chain vaper and pretty much vape all day. I first was running mine with a .4 ohm build at 40 watts but I get a much better vape and respectable battery life with 1 to 1.8 ohm coils. My sweet spot seems to be 30 watts with my current builds and the type of juices I'm using. I get a full work day before I have to charge.

Great device and nice board! !

 

[Cob24]

Not so much. Gotta use an Allen wrench key thing they send you

 

[krobeson]

Got my Atlas today and so far so good!!! The Nautilus hits great now!! One question...can I use my VTC4 in this mod?

Also...has anyone done the 60W upgrade? Is there a manual for the SXi program you put on your PC? I'm not sure what the settings tab does...it looks like it lets you manually set your settings, but they never do anything to my device.

 

[reeftivo]

Very nice! Love the color
ecig city it has a link and here's one from face book.
https://m.facebook.com/bcmodz/posts/270818609788726
you need to download it first

I have no plans right now to do it but it does have a few extra nice features.

 

[krobeson]

Very nice! Love the color
ecig city it has a link and here's one from face book.
https://m.facebook.com/bcmodz/posts/270818609788726
you need to download it first

I have no plans right now to do it but it does have a few extra nice features.

Talked with a person over at eciggy and they said you have to upgrade the wires to 16 gauge for the added power. He also said the Yihicigar plans to add plugs to the wires for easier upgrade.