Sorry, could someone in the know, please kindly answer a couple of noob'ish questions for me, please...
In the question of which ID to choose/is best, is my asumption correct in that the wider the ID, the more cooler it would be, because the added juice in the cotton would cool down more, and so e.g. a wider ID would be good for lunger pulls? Wide for me is 3-3.5mm, btw.
If that's correct, then wouldn't the same result be obtainable from using a lower ID and then lowering the wattage also? I mean so as to obtain the same heat, but with lower battery usage? I'm talking same ohm's obviously...
What i'm getting at, is that many are now using e.g. 3mm contact coils in rta's, and i'm guessing it is for not getting dryburns from higher wattage, but I was just wondering if that wasen't a bit ineffecient, as opposed to e.g. 2mm ID or something.
Lastly, I remember once reading MacTechVpr, stating that he haden't anything against spaced winds, and that they had there place also, so could you Mac, or others in the know, please tell me where in your opinion it makes sence using spaced coils instead of contacts or tmc's. To me, spaced coils give better flavor, but lower vapor/density and so I have to adjust up the wattage higher, which drains my battery faster and gunks quicker, so i'm experimenting back and forth between contacts and spaced winds...
Thanks alot in advance for these noob'ish questions... I use rta's in 12-25watts, and have messed with a lot of builds latelly, and have a hard time finding out what's the best/most effecient with regards to ID...