The " BUZZ " VariVolt Pv's coming SOON !

[wolflrv]

Ok Buzz..I was all set in my mind as how to test and set the Buzz up. I've tested both atties and batteries with my multimeter and have built a few mods, so I'm not unfamiliar with the procedures, but it sounds like the "electronics" inside the Buzz are gonna be a bit different to read.

So if I'm understanding you right..when I test the setup and it reads 6.0 on the meter and I then load up an atty..it's gonna drop the actual voltage that goes through the atty? By how much then? .5v? 1v? Should I be setting it for 6.5 to achieve 6.0 in actual usage?

Just wanna know...I hate killin' atties and don't want to hit it too hard?

 

[BuzzKill]

Ok Buzz..I was all set in my mind as how to test and set the Buzz up. I've tested both atties and batteries with my multimeter and have built a few mods, so I'm not unfamiliar with the procedures, but it sounds like the "electronics" inside the Buzz are gonna be a bit different to read.

So if I'm understanding you right..when I test the setup and it reads 6.0 on the meter and I then load up an atty..it's gonna drop the actual voltage that goes through the atty? By how much then? .5v? 1v? Should I be setting it for 6.5 to achieve 6.0 in actual usage?

Just wanna know...I hate killin' atties and don't want to hit it too hard?

If the voltage is set within the specified 3.6 to 6 volts it will stay within 2% of the set voltage. !

Anything over that and all bets are OFF ( see the prior posting )

 

[mrjaguar]

whats the average delivery time from ordering?

 

[BuzzKill]

Heres a TURNS vs POWER Vs VOLTAGE Vs CURRENT chart for Ya

 

[BuzzKill]

whats the average delivery time from ordering?

2-4 days right now

 

[firhill]

Nice chart...simplifies it all

 

[BuzzKill]

Thanks FIR , for some people a picture is a worth a 1,000 words !

I have another chart that shows just the voltage Vs turns I'll go find it .

 

[5cardstud]

That's what they said on the Candlepower forum too. That's why I thought it was odd when some people on this forum claimed the high drains last longer than the Li-Ions.

I have some AW's hi drain batts and they dont last as long either .

At twice the price I don't think I'll be buying anymore of those. The only advantage I can see in them is if the ones with the protection circuit don't fit.

 

[nbaagain]

Posted a little review about the Buzz. Thanks Buzzkill!

http://www.e-cigarette-forum.com/forum/electronic-cigarette-reviews/98943-another-buzz-review.html

 

[BuzzKill]

Cool I saw that Nbaagain Thank You ! glad your liking it

 

[wolflrv]

Thx for the clarification Buzz and cool charts too!

Nbaagain...nice review I'm really drooling!

 

[wolflrv]

YEAH!! Got my shipping confirmation!!

Also went out in the shop early this morning before it got too hot and built my little voltage tester complete with 901 connector scavenged off an old dead atty.

Don't ever throw away old parts..they're always good for something!!

 

[BuzzKill]

BTW due to consumers wanting the 510 connector I am having some prototypes being made and will be getting some in soon ( 3-4 weeks at least )
So the 510 will become available later down the road.

 

[Synthnadz]

BTW due to consumers wanting the 510 connector I am having some prototypes being made and will be getting some in soon ( 3-4 weeks at least )
So the 510 will become available later down the road.

Just in case you weren't already considering this, be sure to make sure that the 510 threads are compatible with the 510 cartomizers, as many people (like me) will probably want to use them. The 510 adapters that come with a number of other mods often don't fit the threads on the cartos, so I figured it would be worthwhile to point this out while you're in the R&D phase. ;-)

 

[5cardstud]

Just in case you weren't already considering this, be sure to make sure that the 510 threads are compatible with the 510 cartomizers, as many people (like me) will probably want to use them. The 510 adapters that come with a number of other mods often don't fit the threads on the cartos, so I figured it would be worthwhile to point this out while you're in the R&D phase. ;-)

Just FYI, the adapters notcig sells do work with the 510 cartos. Thanks for the heads up I didn't know some adapters dont work.

 

[BuzzKill]

Well the thread on a standard 510 is a 7mm x .5 pitch , is there a lenght difference ?

I guess I need to get some to find out !

WHere do you guys get them , I'll check E-cig supply and see what they have ,

I want to make this right the first time !

 

[Hyperspace]

Just FYI, the adapters notcig sells do work with the 510 cartos. Thanks for the heads up I didn't know some adapters dont work.

I didn't know some adapters didn't work either. It makes me wonder if they would work on my adapter. I have a 801 to 510 adapter from Vaprlife.

ADAPTER

 

[Synthnadz]

I didn't know some adapters didn't work either. It makes me wonder if they would work on my adapter. I have a 801 to 510 adapter from Vaprlife.

ADAPTER

Let's not let this get our of hand, guys. ;-)

Every 801 or 901 -> 510 adapter I own (and I own quite a few) works perfectly with 510 cartos, it's just a few 'native' 510 adapters (like the ones on my Prodigy V1 and V2, for example) that don't fit the 510 cartomizers.

So, you'll probably be fine with your 3rd party, 'add-on' 510 adapters.

 

[harpo]

Let's not let this get our of hand, guys. ;-)

Every 801 or 901 -> 510 adapter I own (and I own quite a few) works perfectly with 510 cartos, it's just a few 'native' 510 adapters (like the ones on my Prodigy V1 and V2, for example) that don't fit the 510 cartomizers.

So, you'll probably be fine with your 3rd party, 'add-on' 510 adapters.

I have the eastmall 510 cartomizers and they work on my prodigy V2 but not my silver bullet. What I did was take steel wool and used it on the carto threads. Then pulled the center pin out slightly on the carto and they worked on the SB. The manufactures of all atties and cartos need to tighten up the tolerances. Just too much variations.

 

[Hyperspace]

Let's not let this get our of hand, guys. ;-)

Every 801 or 901 -> 510 adapter I own (and I own quite a few) works perfectly with 510 cartos, it's just a few 'native' 510 adapters (like the ones on my Prodigy V1 and V2, for example) that don't fit the 510 cartomizers.

So, you'll probably be fine with your 3rd party, 'add-on' 510 adapters.

That's good to know.


A video review of the Buzz has just been posted by JDSupreme.

http://www.e-cigarette-forum.com/forum/electronic-cigarette-reviews/99083-buzzkill-video-review.html