The " BUZZ " VariVolt Pv's coming SOON !
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
Right now we are just trying them out , I want to see how they work out for people , I have been throwing some in with orders .
PM me
PM me
I have an adapter, but the adapter center is too thick, and I can't screw the adapter all the way down, or I can't get the carto on. I guess I'll order a few difft type of adapters and see what works.
SO what is happening JAG ?? Did you get a 901-808 adapter from me ?
Trying to help out here IF I can .
Trying to help out here IF I can .
ok, I have 2 difft adapters, 901-808 (neither are from you) and if I screw the adapter all the way down, the center post is too high for me to screw on a carto. if I only screw on the adapter half way, I can get a carto on enough that it's usable. I love the buzz, I think it's an issue with my adapters. I'll get an adapter from you and try that. but I absolutely love this thing. I'm assuming it'll work with 2 3.0v batteries too?
Try putting the cartomizer on the adapter first and then on the buzz.
There is a lot of variation from adapter to adapter , I have some slotted screws that can lower the center post .
I am getting some shorties soon BUT I have not tried then yet.
BTW I have a FORUM on the notcigs site now !
notcigs.com • View forum - Your first forum
There is a link on the site as well.
notcigs.com • View forum - Your first forum
There is a link on the site as well.
It will work with 3.0 volt batts for a short time ( until it trips the Low battery detector circuit )
Hey Hey
I just sent you a PM with an idea about the screw/center post that hubby came up with to fix the variation problem. Happy Vaping!!
Hey Hey
Happy Vaping!!
Thanks Witchway ! looking at it now
Got you set up for Red now Miximan !
Thanks for the forum help
Congrats Miximan!
So tonight I'm trying a SmokeStik 4081 cartomizer on the Buzz set at 4.9 volts. I ordered a 901-4081 adapter but it isn't here yet so I'm using a 901-510 topped with a 510-4081 adapter. This carto tested at 3.3ohm and I could probably get away with a higher voltage, but it came prefilled with menthol and any higher on the voltage the menthol would kill me. I've had real good luck with these cartos not burning at 3.7v so thought I'd see how it did with the higher voltage. The Buzz just makes experimenting so much fun!!!!
So tonight I'm trying a SmokeStik 4081 cartomizer on the Buzz set at 4.9 volts. I ordered a 901-4081 adapter but it isn't here yet so I'm using a 901-510 topped with a 510-4081 adapter. This carto tested at 3.3ohm and I could probably get away with a higher voltage, but it came prefilled with menthol and any higher on the voltage the menthol would kill me. I've had real good luck with these cartos not burning at 3.7v so thought I'd see how it did with the higher voltage. The Buzz just makes experimenting so much fun!!!!
I was having trouble with 510 cartos so I checked the thread of the carto and noticed that the thread was 1mm longer than the positive post. So I simply filed down the thread and the post by 2 mm, filed a new air line on the positive post and now it screws in perfectly and works great.
Last edited:
I'm going to try and find the right adapter for the Buzz , these so much variation out there it is hard to know what will work or wont work .
Nice modding Uneverno !
Nice modding Uneverno !
Ok got my order cleared up. Thank you Buzz for the jucier, it's gonna get a good home and alot of use. You rock buddy! Sent you a pm about another marketing angle for buzz. Let me know what you think.BuzzKill said:
- Status
