The Copper Creek Chit-Chat Thread

[stretchpants]

It is but it's the same thing. I got mine from BD a long time ago..You're right.

Deff difrent than the one you have SP.

 

[FlyingV]

I watched a video on filling Phiniacs from the bottom, for me that seems to work every time. I never tried the tool. Looks interesting!

 

[sessiondrummer]

I've been using a skinny alumun one.

If you have the one I'm thinking of they work the same, just look different. Yours might be easier to grab a hold of.

 

[FlyingV]

Taking Mr. V to Outback Steakhouse tonight for his birthday. No cooking for me. Woo Hoo!

 

[sessiondrummer]

I watched a video on filling Phiniacs from the bottom, for me that seems to work every time. I never tried the tool. Looks interesting!

WOW, bottom fillin'. I'm intrigued, and now must search......

 

[stretchpants]

Could you pick some baby backs for me??

Thinking Ribbs,Must go to the store.Grrrrr.I love ribs more than I hate shoping.BBL

 

[stretchpants]

Link??.......

I watched a video on filling Phiniacs from the bottom, for me that seems to work every time. I never tried the tool. Looks interesting!

 

[sessiondrummer]

Taking Mr. V to Outback Steakhouse tonight for his birthday. No cooking for me. Woo Hoo!

No rules just RIGHT !!!!!!!

Enjoy FV.

 

[stretchpants]

Pick me up...Drott skip the babybacks...

Taking Mr. V to Outback Steakhouse tonight for his birthday. No cooking for me. Woo Hoo!

 

[stretchpants]

3 dogs down 5 to go. One weighs a pound and 11 ounces and one weighs 160 pounds....After dogs 2 hellacious cats...

 

[sessiondrummer]

Not that I was ever a huge fan, heard this song in a commercial, found it on YouTube, and it was shifted down to 432Hz (very interesting if you are intrigued let me know), cool melody even for a rocker like me.



Having perfect pitch, and being a musician, I had been aware of the 440 vs. 432 debate a while back. This is probably NOT for a casual listener, but interesting.

Omega432? Raise Your Consciousness, Empower Your Heart!

 

[sessiondrummer]

OH BTW, FV your Cool Aide ROCKS !!!!!!!!

 

[Bamrz]

OK, Andy finally got impatient with waiting for me to hook up the new printer. He now has it plugged in and working, but sitting in the middle of the dining room table!

Yes it is solid, with only minor barbing on the tip (where you grab it) to make it easier to pull out. I have noticed at least on my Phiniac that the seal ON the tool is snugger than the seals around the carto, and the first time I removed it, what I actually did was I pulled the carto clean out OF the tank (spill spill spill), hehe, now I leave the carto threaded to the Provari.

Being an admitted carto n00b, I figured I'd better use a tool like this to:

1. Prevent juice from getting into the air passage.
2. Allow me to top off literally to the top of the tank, and MO vaping time per fill.
3. Prevent damage to the tank o-rings.
4. Prevent (I think) any pressurization forcing excess juice INTO the carto (which already had juice in it) on re-fills.

Thoughts ??

Hmm, I like!! I think I will pick one up soon. Seems like it really would solve the problem of having juice spew out the bottom on refills.

3 dogs down 5 to go. One weighs a pound and 11 ounces and one weighs 160 pounds....After dogs 2 hellacious cats...

Please tell me you're not going to bathe the cats?!?! 8-o

 

[sessiondrummer]

OK, Andy finally got impatient with waiting for me to hook up the new printer. He now has it plugged in and working, but sitting in the middle of the dining room table!


Hmm, I like!! I think I will pick one up soon. Seems like it really would solve the problem of having juice spew out the bottom on refills.


Please tell me you're not going to bathe the cats?!?! 8-o

I have LOTS of CATS, please let me know if there will be cat bathing, I deliver, ....... CATS that is.......

Bamrz, you are far better versed in cartos than I, and I'm probably making EVERY single n00b mistake that can be made. My FAVORITE was when I FIRST got cartos, I thought the filler went all the way to the top (I mean it sure LOOKED like white stuff all the way to the top), so I punch it, put it in my J-Tank, wait, wait, wait, vape, and it was a hot, sizzling, juice spewing MESS.
I posted on the main site somewhere, and one poster indirectly helped me figure it out. I left the damn white plug (what do they call it a mouth piece ?) IN the damn carto, and jammed my drip tip in on top of it, forcing it DOWN into the carto.

Well, I'm never doing that again, but it's stuff like that that keeps me wondering what ELSE I'm doing wrong.

Please be advised on MY tanks (Phiniac) that tool is a GODSEND to filling. BUT, if I have the carto in the tank and it's NOT screw to my Provari, when trying to remove the tool I DID pull the carto outta the tank.

 

[janieT]

I think it is just the CC juice

I would say NOT!

 

[janieT]

I have that plastic thing from Phiniac to fill tanks. It doesn't slide through a regular tank very well.

 

[Bamrz]

Please be advised on MY tanks (Phiniac) that tool is a GODSEND to filling. BUT, if I have the carto in the tank and it's NOT screw to my Provari, when trying to remove the tool I DID pull the carto outta the tank.

Yup, I learned to not try to remove or replace the end caps, or remove my drip tips unless the carto was screwed onto a device.

I did learn early on to remove that rubber end piece though. That's only because I used carto's without tanks for a while. There's no way to put the juice in if you don't take them out!

 

[MustangSallie]

Yes it is solid, with only minor barbing on the tip (where you grab it) to make it easier to pull out. I have noticed at least on my Phiniac that the seal ON the tool is snugger than the seals around the carto, and the first time I removed it, what I actually did was I pulled the carto clean out OF the tank (spill spill spill), hehe, now I leave the carto threaded to the Provari.

Being an admitted carto n00b, I figured I'd better use a tool like this to:

1. Prevent juice from getting into the air passage.
2. Allow me to top off literally to the top of the tank, and MO vaping time per fill.
3. Prevent damage to the tank o-rings.
4. Prevent (I think) any pressurization forcing excess juice INTO the carto (which already had juice in it) on re-fills.

Thoughts ??

Have you tried blowing out the carto? If you're getting juice coming out the bottom when you blow it out gently, you have very likely flooded it, tool or not.

 

[stretchpants]

Ummm Done..We have to. Even though they are not outdoor cats they are the ones that had the flea infestation. Not the 8 dogs who go to Agility 7 days a week.We still don't know why they had them.Soooo they go scratching and clawing into the tub

OK, Andy finally got impatient with waiting for me to hook up the new printer. He now has it plugged in and working, but sitting in the middle of the dining room table!


Hmm, I like!! I think I will pick one up soon. Seems like it really would solve the problem of having juice spew out the bottom on refills.


Please tell me you're not going to bathe the cats?!?! 8-o

 

[stretchpants]

Bamrz has built a 747 in her backyard on her day off so it would seem natural to me that she could talk about Cartos.

I have LOTS of CATS, please let me know if there will be cat bathing, I deliver, ....... CATS that is.......

Bamrz, you are far better versed in cartos than I, and I'm probably making EVERY single n00b mistake that can be made. My FAVORITE was when I FIRST got cartos, I thought the filler went all the way to the top (I mean it sure LOOKED like white stuff all the way to the top), so I punch it, put it in my J-Tank, wait, wait, wait, vape, and it was a hot, sizzling, juice spewing MESS.
I posted on the main site somewhere, and one poster indirectly helped me figure it out. I left the damn white plug (what do they call it a mouth piece ?) IN the damn carto, and jammed my drip tip in on top of it, forcing it DOWN into the carto.

Well, I'm never doing that again, but it's stuff like that that keeps me wondering what ELSE I'm doing wrong.

Please be advised on MY tanks (Phiniac) that tool is a GODSEND to filling. BUT, if I have the carto in the tank and it's NOT screw to my Provari, when trying to remove the tool I DID pull the carto outta the tank.