Wonder if I can just order the rounded end to go on the Copper I already have? Thats a question Rick
A very good question!
The Copper Review
- Thread starter youtubecommercial
- Start date
- th_trl_thread_readers 0
- Status
A very good question!
I don't know if "the copper" is good or bad. Bud I've seen HORRIBLE flashlights on sale here for about the same price... I like the switch idea, something different from those all the same red tiny and excessively protruding switches.
Comparing this to all the mods on sale, from the + $150 ones to the $50 flashlights, I don't think $56 is expensive at all for this mod.
I totally agree with that!
Last edited:
Well, I wish it where that easy.
Each unit is hand made one by one. The tops of the Copper are adjusted to the depth of a washer inside. Being that I do not have fancy machining tools, "depth gauges", or an assembly "plant", each internal washer depth is not the same on each pipe. One may be 4mm, next one 4.5mm, etc.
Therefore the top is adjusted according to the depth of the washer.
When the end get rounded, it is the first step in the process, this is not how Zo did it (he already had the adaptor end installed). But it is a simpler way of doing it.
To make the long story short:
I'd basicly have to start from scratch, I can't do the machining on existing Coppers, well it wouldn't be cost efective.
However, I can probably do an exchange.
I think you better contact me (those that are interested) because I believe I'm pushing the rules here as it is.
I'm a supplying modder and I'm really not allowed to "push sales" or advertise in this forum section.
Moderators, please forgive me if "I dun wrong".
The original ecigs were invented as an attempt to recreate the experience of smoking a real cigarette. To do that, they can incorporate a number of electronic components and assemblies.
A basic 801 pen-style, e-cig, for example, has a battery which activates either by the pressure change you generate by drawing on it or by the sound of the air moving through it. Both automatic and manual batteries can incorporate miniature-electronic cut-off timers to save your lungs or wear and tear on the atomizer, and all of that in addition to circuitry that keeps the battery from overcharging when you plug it in and leave it on.
Pretty much all the mods out there, are attempts to strip away that complexity while providing more powerful heating to the atomizer to increase vapor volume/flavor, FAR longer battery life, or both together.
I hope that answers your question.
A basic 801 pen-style, e-cig, for example, has a battery which activates either by the pressure change you generate by drawing on it or by the sound of the air moving through it. Both automatic and manual batteries can incorporate miniature-electronic cut-off timers to save your lungs or wear and tear on the atomizer, and all of that in addition to circuitry that keeps the battery from overcharging when you plug it in and leave it on.
Pretty much all the mods out there, are attempts to strip away that complexity while providing more powerful heating to the atomizer to increase vapor volume/flavor, FAR longer battery life, or both together.
I hope that answers your question.
today i have recieved the COPPER, so its 20 $ to europe - not 160; some mistake on the page calculation ;-)
have to say i am impressed by elegant idea to make e-cig mod without any wires and I like the ‘industrial look” as well ;-) , but i have to point not a very safe way of activation the atomizer. Atomizer get contact not only if you deeply press it in, but also if you slightly press atomizer at the side (kind of bending). today i realize it when atomizer get extremely hot in my pocket. So, the COPPER extremely solid, but the same time not so safe for the transportation IMHO. more kind of “home use”. or its only my model have such sensitive contact?
have to say i am impressed by elegant idea to make e-cig mod without any wires and I like the ‘industrial look” as well ;-) , but i have to point not a very safe way of activation the atomizer. Atomizer get contact not only if you deeply press it in, but also if you slightly press atomizer at the side (kind of bending). today i realize it when atomizer get extremely hot in my pocket. So, the COPPER extremely solid, but the same time not so safe for the transportation IMHO. more kind of “home use”. or its only my model have such sensitive contact?
Ok, I found the mysterious problem about oversensitive contact of Copper : some of trustfire (gray) batteries have a smaller diameter of positive end, so its went too deep inside and provoke the activation. So pay attention what kind of battery to use with the Copper.
Attachments
Last edited:
I really love the copper. Hope to be ordering one soon. It is definitely my number one choice for a big batt mod. The mini copper, to be more specific. Very good job designing this beauty!
I like the Copper, but keep it at home. Delivers a lot of flavor, and is indestructible. I have a few mods now, and would like to see a poll comparing the little difficulties with each one. There seems to be specific problems that crop up with each one. The Janty stick button, the Prodigy/Protoge button, the SuperT with all it's moving parts is more upkeep, etc. I like the designs with a cup under the atomizer that keeps the liquid from leaking down the sides of the mods (such as the Protoge has), as the SilverBullet gets messy.
I like the Copper, but keep it at home. Delivers a lot of flavor, and is indestructible. I have a few mods now, and would like to see a poll comparing the little difficulties with each one. There seems to be specific problems that crop up with each one. The Janty stick button, the Prodigy/Protoge button, the SuperT with all it's moving parts is more upkeep, etc. I like the designs with a cup under the atomizer that keeps the liquid from leaking down the sides of the mods (such as the Protoge has), as the SilverBullet gets messy. Having to use lubes on them, the threads wearing out, some scratch easily, etc. Now, when I look at the new mods on the market, I try to compare designs to see which might be the simpler device.
Well, I bit the bullet! I went ahead and ordered myself a copper-mini last night. I have emailed Rick quite a few times and have always gotten a very quick, polite response. He really seems like a good guy who wants to do good, honest business. I will have to report my overall impressions of the copper-mini when it arrives. I CAN NOT wait! Soooooo excited! =)
Updated link to the Copper:
AtmosUSA
AtmosUSA
The Copper is a unique mod as it has no electrical components other that the batteries and atomizer. I got mine today and am very impressed with it! it is small and don't need to worry about braking this baby
Its definitely Worth checking out!
Link to The Copper
AtmosUSA
In my mind, youtubecommercial, you-along with lawnman3-are the perfect review type person since you own, and have experience using, all of the mods out there. You've certainly got your opinions concerning the pros and cons of all of them, why not share them with us?
Thread needed to be moved as suppliers are prohibited to post in the E-cig review forum. Their post were made before the new forum was created which allows them to respond.
- Status
