The Echo Thread - Part 2
- Thread starter ECFadmin
- Start date
- th_trl_thread_readers 0
- Status
Thanks for looking. For some reason V4L's site doesn't render too well on Linux, and I'm just too lazy to reboot into Windows to look at it right now.
I'm sure Charlz will answer, but I'm just going to assume I need to stick with standard 35 mm cartos.
I'm sure Charlz will answer, but I'm just going to assume I need to stick with standard 35 mm cartos.
I think the tank cartos are actually longer then standard. I JUST went through my scraps bag and threw out my V4L tank cartomizer, let me see if I can find it in the trash LOL. BRB.
Hi Charlz. Yes I am blessed to have about 6 non-stealth Echos in my inventory that are still in their original wrappers. I wil get an adapter or two from MadVapes and see how the Vivi Nova tanks go with the new/old Echos. I have never had as much as a small drop of juice from those tanks or clearos unless you count the 2 times I unscrewed the bottom of the tank with an abundance of juice in it instead of making sure I was only removing the top of it to refill. What a mess that was!!
Well I ordered some 350mah Echo (well I hope they are Hangsen anyway) mini autos from Tha Vapor Girl. I'll be the guiny pig on these. Figure them to be the ultimate stealth KR808D1's as they should be shorter than my old Smoketip auto cigs with an Echomizer on 'em. After a few years or the 650's hanging from my teath, these may just float away.
You guys don't forget to go ahead and buy your new toys pretty soon because the Chinese New Year will be here before you know it. Supplies usually dwindle the first two weeks of February and shipments can be delayed from arriving in the USA until the middle of March.
Dammit, Charlz was right. The 808 battery extension won't fire the 901 attys on the Echo.
However, the 801 and eGo/510 adapters work fine on the sealed battery.
However, the 801 and eGo/510 adapters work fine on the sealed battery.
So I guess I might be ready to do some modding. Broke one of my cartos today. I pushed the filler down a little too far and pushed the atomizer straight out the bottom, so I went ahead and disassembled it. I kept the cone body and the bottom portion with the threads. I threw the rest in the trash since I was at work and had no place to store the air tube and cotton.
So what can I do with these parts? I'm still working my way through the first Echo thread.
So what can I do with these parts? I'm still working my way through the first Echo thread.
Echomizer. 
I already did the cute little cone mod. Now I can at least use a 510 tank and not have it look funky.
Anything else I could use these pieces for?
I already did the cute little cone mod. Now I can at least use a 510 tank and not have it look funky.
Anything else I could use these pieces for?
Just got my "The Vapor Girl" mini Echos. They are not as short as I thought they would be for only 350mah. They are 57mm/2.25" long. A 650 mah is 65mm/2.5" long. Only a quarter inch difference, and 300mah less. They are sealed, stealth, and have a nice rubber coating. They have a ten second cut off.
I got four, and one the light comes on, and stays on when a Echomizer is connected. I'll mess with the post latter to see if this fixes it. The rest vape great as any Echo.
They came fully charged, and "The Vapor Girl" threw in 4 free chargers. She also wrote a realy nice letter of appreciation.
If the one that doest fire right doesn't work, I am not upset, as I basically was given 2 full kits for the price of 4 bats. And I'm an pretty sure messing with the post will fix it.
I'll keep this updated.
I got four, and one the light comes on, and stays on when a Echomizer is connected. I'll mess with the post latter to see if this fixes it. The rest vape great as any Echo.
They came fully charged, and "The Vapor Girl" threw in 4 free chargers. She also wrote a realy nice letter of appreciation.
If the one that doest fire right doesn't work, I am not upset, as I basically was given 2 full kits for the price of 4 bats. And I'm an pretty sure messing with the post will fix it.
I'll keep this updated.
Johnnie. Keep the parts, because as you rebuild other Echomizers in the future.
The cones sometimes stress crack up the sides after being taken off and on to many times. You cant see it on regular inspection but juice will slowly leak out where its cracked. The filler can get burned if the coil is off center, or you run dry, and its nice to have extra. Its nice to have the atomizer in case a different one burns out, you can replace it.
The cones sometimes stress crack up the sides after being taken off and on to many times. You cant see it on regular inspection but juice will slowly leak out where its cracked. The filler can get burned if the coil is off center, or you run dry, and its nice to have extra. Its nice to have the atomizer in case a different one burns out, you can replace it.
I was going to spring for a stealth kit next pay day, but if they're only a 1/4 inch shorter than I'd rather get another 650 kit.
Quick update on the mini's. These may not be much shorter than 650's but they sure are a lot lighter. a lot easier to hang from the mouth cigar style.
Be aware of the CE4's from Vapor Girl as well, if you use them. They only have two slots for air flow at the base, so the draw is super tight.
- Status
Similar threads
- Locked
- Locked