One thing you might note is if you get a pkg that is open or missing items reject it immediately. It is tough to prove that it happened somewhere else in the chain. It helps to get to know your mailperson.
The FastTech Thread for All FastTech Posts (Part 2)
- Thread starter Ref Minor
- Start date
- th_trl_thread_readers 0
- Status
26650 is much Fatter. 18650 (18)mm diameter, (65)mm length, (0) Round
26650 is 26mm diameter
Panzer top contact pen screws down to make battery connection. Maximum battery length 70mm so if you have a standard 18650 you need nearly 5mm of screw extension.
Last edited:
That's what doesn't make sense to me there's ALOT more than 5mm of play in there.. You can slide it back and forth inside like half inch or more.
probably be ordering my third magma RDA since they just started carrying it
not sure I trust that the posts are "welded" really wish there was a photo of the posts making connection to the base
not sure I trust that the posts are "welded" really wish there was a photo of the posts making connection to the base
Hard to say if that one works like that. There's one with a spring loaded pin. Which is why people should include links to what they're having problems with.
Actually no - the Panzer Black has no locking switch and Spring loaded/thin top cap with no contact issues.
Panzer {BLACKHAWK} is threaded battery adjuster/thick top cap and locking switch. This one is popular for loose battery screw and battery rattle.
Was a good day for new releases on FT. Ordered a couple 18350 brass Paps clones @ $12 each (WOW!!!) and a copper Quasar.
Love that site.
Love that site.
I found the screw.. It wasn't even in the mod. It was outside the mod, outside the bag, outside the box, and inside the package it shipped in. How the heck does that happen
Actually no - the Panzer Black has no locking switch and Spring loaded/thin top cap with no contact issues.
Panzer {BLACKHAWK} is threaded battery adjuster/thick top cap and locking switch. This one is popular for loose battery screw and battery rattle.
$23.21 Panzer Style Mechanical Mod - 18350/18500/18650 / copper contacts at FastTech - Worldwide Free Shipping Spring loaded (says Blackhawk on it).
$29.15 Panzer Style Mechanical Mod - 18650/18500/18350 at FastTech - Worldwide Free Shipping Screw.
$32.15 Panzer Style Mechanical Mod - 18650/18500/18350 at FastTech - Worldwide Free Shipping Screw (says Blackhawk).
$24.11 Panzer Style Mechanical Mod - 18650/18500/18350 at FastTech - Worldwide Free Shipping Screw.
And as stated - the Spring loaded pen design has a shorter Cap and NO Battery rattle issues also a narrower mod.
2 of those are NOT BlackHawk and one is Spring loaded and the 18650's fit. I'm not sure where your going with this? I answered his issue.
I found the screw.. It wasn't even in the mod. It was outside the mod, outside the bag, outside the box, and inside the package it shipped in. How the heck does that happen
On a bright note, I ticketed Fasttech about my Omega return and they processed my replacement for it and the Damaged Kayfun Top Cap Nano kit. Already packaged and marked shipped.
Last edited:
Where I'm going is where I've already went with "Which is why people should include links to what they're having problems with."
Went through the spare parts box today and built a somewhat unique Nemesis Kayfun setup. It weighs less fully loaded than my two other Nemesis setups do without a battery. Have already set it back down or unscrewed the bottom several times thinking it had no battery installed.
Performs well too.
From the bottom up it is comprised of:
The switch and tube from this; https://www.fasttech.com/p/1645505
This hybrid connector; https://www.fasttech.com/p/1662400
The base from this (FT sent the entire base as a replacement for a wonky collector tank); https://www.fasttech.com/p/1494700
A clear tank from this assortment; https://www.fasttech.com/p/1662300
The chimney and top cap from this; https://www.fasttech.com/p/1570900
Topping it off is this tip; https://www.fasttech.com/p/1564002
I present the FastTech Frankenemesis KF or perhaps the FTFKF.
Performs well too.From the bottom up it is comprised of:
The switch and tube from this; https://www.fasttech.com/p/1645505
This hybrid connector; https://www.fasttech.com/p/1662400
The base from this (FT sent the entire base as a replacement for a wonky collector tank); https://www.fasttech.com/p/1494700
A clear tank from this assortment; https://www.fasttech.com/p/1662300
The chimney and top cap from this; https://www.fasttech.com/p/1570900
Topping it off is this tip; https://www.fasttech.com/p/1564002
I present the FastTech Frankenemesis KF or perhaps the FTFKF.
Last edited:
Went through the spare parts box today and built a somewhat unique Nemesis Kayfun setup. It weighs less fully loaded than my two other Nemesis setups do without a battery. Have already set it back down or unscrewed the bottom several times thinking it had no battery installed.
From the bottom up it is comprised of:
The switch and tube from this; https://www.fasttech.com/p/1645505
This hybrid connector; https://www.fasttech.com/p/1662400
The base from this (FT sent the entire base as a replacement for a wonky collector tank); https://www.fasttech.com/p/1494700
A clear tank from this assortment; https://www.fasttech.com/p/1662300
The chimney and top cap from this; https://www.fasttech.com/p/1570900
Topping it off is this tip; https://www.fasttech.com/p/1564002
I present the FastTech Frankenemesis KF or perhaps the FTFKF.
View attachment 338657
Got one for you. I'll add the parts if you want me to with skus.
Switch from SS Nemesis
SS lock ring
Black 350 tube
Copper kick tube
Hybrid adapter
Kayfun 3.1
Copper tip
Then there's this one
SS switch
Brass lock ring
Black 500 tube
Brass beauty ring
SS extender
Brass top
Omega
Brass tip
Any reason to get an Atomic RDA now? I've wanted one forever but wasn't paying the "new clone" price they wanted to charge for past two months
recently got
Magma
Stillare
Quasar
Magma #2
recently got
Magma
Stillare
Quasar
Magma #2
Boborone, could it be said the Nemesis has become the small block 350 of the mech mod world? Inexpensive, easy to find, highly adaptable and great performing.
With a stainless, copper and aluminum Nemesis in the stable I have no need for another but each time I see a nice brass atty or tip, can't help but think how it would look on a brass Nemmy.
ENJOY
With a stainless, copper and aluminum Nemesis in the stable I have no need for another but each time I see a nice brass atty or tip, can't help but think how it would look on a brass Nemmy.
ENJOY
Its hard for me to agree as I'm a Ford guy.
But I see exactly what you're saying and yes sir. Only thing I hate is that in order to get a new crankshaft, you have to buy a whole new engine. When are they gonna sell just the switches and tops?
I really have to stay out of this thread... I'm sitting here, going on week 3 with no updates of tracking or any sign of the package here in the states. Just asked FT to put out a shipping inquiry and figure out what the blind hell is going on.
- Status
Similar threads
- Locked
