The FastTech Thread for All FastTech Posts (Part 2)
- Thread starter Ref Minor
- Start date
- th_trl_thread_readers 0
- Status
The 30a is part of the model number, it's not the amp rating. The same is true for the 28a and 32a. I have a couple of older Samsung icr18650-26f, 2600 mAh and a c-rating of 2, which adds up to 5.2 amps. Also, the discharge curve plays a huge part in the usability of batteries in vaping. Batteries that have a large mAh-rating may discharge to unusable voltages quickly, whereas batteries with a low mAh-rating may hold a useable voltage level longer.
Sent from my GT-I9100 using Tapatalk
Really digging the gold plated patriot and mixed nemesis
Sent from my Nexus 5 using Tapatalk
Excellent looking Combo!
I go by watts. I use this : The Force Kick Adapter or this :
Genuine Joyetech 18650/18350 Evic/Mod Easy Control Unit
or a Kick V2.
You just set your wattage and forget about it. The Joyetech Easy is the easiest to use.
Genuine Joyetech 18650/18350 Evic/Mod Easy Control Unit
or a Kick V2.
You just set your wattage and forget about it. The Joyetech Easy is the easiest to use.
Review of
http://www.fasttech.com/p/1601200
First thing I noticed was this
Obviously not
Then I noticed the holes aren't on the same plane. The positive post screw doesn't go all the way down to lock the wire. So in order to capture the wire I had to wrap it around the screw.
I knew it only came with one air hole but that was fine. I wanted it for the looks. And a single coil with a tight draw makes it a nice mouth hit atty.
One of the negative posts is off turned.
Again, not a problem, has one air hole and makes a single coils builds just fine.
Also got some 5ml bottles to carry for dripping.
Overall I say a well bought item and I recommend it. And they have a 22mm version of the gold plated patriot in now. But I think this looks and functions fine for what I wanted from it. A single coil tight draw RBA.
Sent from my Nexus 5 using Tapatalk
http://www.fasttech.com/p/1601200
First thing I noticed was this
Obviously not
Then I noticed the holes aren't on the same plane. The positive post screw doesn't go all the way down to lock the wire. So in order to capture the wire I had to wrap it around the screw.
I knew it only came with one air hole but that was fine. I wanted it for the looks. And a single coil with a tight draw makes it a nice mouth hit atty.
One of the negative posts is off turned.
Again, not a problem, has one air hole and makes a single coils builds just fine.
Also got some 5ml bottles to carry for dripping.
Overall I say a well bought item and I recommend it. And they have a 22mm version of the gold plated patriot in now. But I think this looks and functions fine for what I wanted from it. A single coil tight draw RBA.
Sent from my Nexus 5 using Tapatalk
I just wanted to mention..... My Patriot clone, ordered from FastTech and shipped on 1/4/14 arrived at my mailbox today on 2/19/14.
I mainly bought it just to see how long an inexpensive FastTech order could take to arrive with no tracking or additional cost to the free shipping on an item purchased for $5.43 USD.
Shipping via International Airmail I'm was surprised it arrived at all as I was positive that an airplane couldn't actually fly so slowly and stay in the air.
Okay purests! That's a joke and I'm not looking for any explanation of Chinese shipping proceedures or practices.
I mainly bought it just to see how long an inexpensive FastTech order could take to arrive with no tracking or additional cost to the free shipping on an item purchased for $5.43 USD.
Shipping via International Airmail I'm was surprised it arrived at all as I was positive that an airplane couldn't actually fly so slowly and stay in the air.
Okay purests! That's a joke and I'm not looking for any explanation of Chinese shipping proceedures or practices.
Are you sure you don't want an explanation of China shipping procedures?,it's very easy to do.
sand down the post so the screw can go deeper. i had to sand down a lot of posts on the FT drippers. very easy to do
for those of you that like\love the rocket,FT has a new version out now
$24.72 Rocket V2 Rebuildable Atomizer Kit (4.0-5.0mL) - adjustable air flow at FastTech - Worldwide Free Shipping
$24.72 Rocket V2 Rebuildable Atomizer Kit (4.0-5.0mL) - adjustable air flow at FastTech - Worldwide Free Shipping
It's all stainless steel now (mostly). Much better... shame it's so tall though, I really like that knurled ring, but I prefer the KFL because of the nano kit..
Order placed 2/9/14
Need Jeopardy Music. Playing the waiting Game.
I knew ordering right before or right after CNY would be difficult at best. But needing a few things, I figured it would be better to get on the front end of a long waiting list than buried in line on a second or third Restocking wait.
Seems FT is waiting on a lot of manufacturers to get caught up.
5 of 6 original ordered items were out of stock. Several of those normally stocked items. Silica and Drip tips
Now 4 or 6 have been picked but 2 are in Restocking
1 Has no date and may be any day
1 Says 2/25/14 and has been a trouble item for replenishment.(lists as ships in 5 Days)
Glad I don't need any of this very soon but it will be interesting to see how long it takes to reach SHIPPED status.
Need Jeopardy Music. Playing the waiting Game.
I knew ordering right before or right after CNY would be difficult at best. But needing a few things, I figured it would be better to get on the front end of a long waiting list than buried in line on a second or third Restocking wait.
Seems FT is waiting on a lot of manufacturers to get caught up.
5 of 6 original ordered items were out of stock. Several of those normally stocked items. Silica and Drip tips
Now 4 or 6 have been picked but 2 are in Restocking
1 Has no date and may be any day
1 Says 2/25/14 and has been a trouble item for replenishment.(lists as ships in 5 Days)
Glad I don't need any of this very soon but it will be interesting to see how long it takes to reach SHIPPED status.
I was eyeing that a few min ago. I might break down and buy it.
I figure Chinese new year accounts for a lot of stuff getting behind. No orders filled or production during that time is bound to cause everything to backlog but I could be wrong.
- Status
Similar threads
- Locked
