I have this one already, LOVED IT!!!
But be careful, I put on a different drip tip and cracked it at the top.
The FastTech Thread for All FastTech Posts (Part 2)
- Thread starter Ref Minor
- Start date
- th_trl_thread_readers 0
- Status
I have this one already, LOVED IT!!!
But be careful, I put on a different drip tip and cracked it at the top.
Just checked and sure enough you're right. The cap is drilled but the ring isn't. What's crazy is I thought I had found another to add to the list of double drilled RDAs on ft. It's amazing how few there are on the site. Tridents and Omegas are, and I think just a couple others are. Not much. It's why my Patriot is only doing duty as single coil. Time to get the dremel out.
On another note. I guess this is why ft waits 2 months before giving you a refund.
March 12, 2014 , 10:25 am
Out for Delivery
PLANO, TX 75075
March 12, 2014 , 10:15 am
Sorting Complete
PLANO, TX 75075
March 12, 2014 , 6:14 am
Arrival at Unit
PLANO, TX 75075
March 12, 2014
Depart USPS Sort Facility
COPPELL, TX 75099
March 12, 2014 , 1:48 am
Processed through USPS Sort Facility
COPPELL, TX 75099
February 26, 2014 , 9:49 am
Processed Through Sort Facility
SHENZHEN EMS, CHINA
Origin Post is Preparing Shipment
February 25, 2014 , 4:32 pm
Acceptance
CHINA
Two weeks and it never showed that it was even in US. Suddenly it shows up here and out for delivery. Nice. That one has an Omega in it and I can get to building dual coils.
Last edited:
getting one of these for the crack lol, just got to wait on pay day to get it with my kayfun lite and other bits. 
$1.56 Glow in the Dark Middle Finger 510 Drip Tip - acrylic at FastTech - Worldwide Free Shipping
$1.56 Glow in the Dark Middle Finger 510 Drip Tip - acrylic at FastTech - Worldwide Free Shipping
Wow, Kayfun Nano kit for only $5.19!
$5.19 Kayfun Nano Body Kit at FastTech - Worldwide Free Shipping
$5.19 Kayfun Nano Body Kit at FastTech - Worldwide Free Shipping
Got my Sony vt3s today. Would have been yesterday but no one could sign for it.
My new order:
$17.51 Rocket V2 Rebuildable Atomizer Kit (4.0-5.0mL) - adjustable air flow at FastTech - Worldwide Free Shipping
$15.52 Kayfun v3.1 ES Styled Rebuildable Atomizer Kit (4.5mL) - chromed brass version at FastTech - Worldwide Free Shipping
$1.10 CE4/CE5/CE6 to 510 Drip Tip Adapter - chromed brass at FastTech - Worldwide Free Shipping
$1.78 Carrying Pouch w/ Lanyard for Vamo / Chi You / Caravela Mods - 145mm*50mm at FastTech - Worldwide Free Shipping
Had to check the V2 Rocket since the price dropped. I really like the V1.
$17.51 Rocket V2 Rebuildable Atomizer Kit (4.0-5.0mL) - adjustable air flow at FastTech - Worldwide Free Shipping
$15.52 Kayfun v3.1 ES Styled Rebuildable Atomizer Kit (4.5mL) - chromed brass version at FastTech - Worldwide Free Shipping
$1.10 CE4/CE5/CE6 to 510 Drip Tip Adapter - chromed brass at FastTech - Worldwide Free Shipping
$1.78 Carrying Pouch w/ Lanyard for Vamo / Chi You / Caravela Mods - 145mm*50mm at FastTech - Worldwide Free Shipping
Had to check the V2 Rocket since the price dropped. I really like the V1.
Can't believe I keep ordering. Nothing I actually need.
3x https://www.fasttech.com/products/1/10006473/1649900-kayfun-nano-body-kit
1x https://www.fasttech.com/products/0/10007252/1646400-omega-style-rebuildable-dripping-atomizer
2x https://www.fasttech.com/products/0/10006771/1634600-replacement-coil-heads-for-evod-c-clearomizer-5
1x https://www.fasttech.com/products/0...ss-510-drip-tip-for-vivi-nova-dct-protank-bcc
1x https://www.fasttech.com/products/0/10006152/1583000-empty-dropper-bottles-for-e-liquids-5-pack-50ml
Going to have to loose the link.......yea right!
3x https://www.fasttech.com/products/1/10006473/1649900-kayfun-nano-body-kit
1x https://www.fasttech.com/products/0/10007252/1646400-omega-style-rebuildable-dripping-atomizer
2x https://www.fasttech.com/products/0/10006771/1634600-replacement-coil-heads-for-evod-c-clearomizer-5
1x https://www.fasttech.com/products/0...ss-510-drip-tip-for-vivi-nova-dct-protank-bcc
1x https://www.fasttech.com/products/0/10006152/1583000-empty-dropper-bottles-for-e-liquids-5-pack-50ml
Going to have to loose the link.......yea right!
Update on my first (and probably last) FastTech order:
Ordered: 02/08
Shipped: 02/20
Giving credit where credit is due: tracking number was given.
Processed: 03/12 through sort facility, Kuala Lumpur Malaysia. I do believe this is finally in the hands of USPS.
I think I'm only a few weeks away now at this point. On second thought, that could be the wait time to make it though customs. I think I should have my package in maybe another 3 or 4 weeks. YEA BABY! lol
Ordered: 02/08
Shipped: 02/20
Giving credit where credit is due: tracking number was given.
Processed: 03/12 through sort facility, Kuala Lumpur Malaysia. I do believe this is finally in the hands of USPS.
I think I'm only a few weeks away now at this point. On second thought, that could be the wait time to make it though customs. I think I should have my package in maybe another 3 or 4 weeks. YEA BABY! lol
Finally my package made it to us soil. Only one state to go til it gets to me, so hopefully by friday!
Sent from my myTouch_4G_Slide using Tapatalk 2
Sent from my myTouch_4G_Slide using Tapatalk 2
For a total of $8.61 I say this is a dam good steal.
http://www.fasttech.com/products/1431800
http://www.fasttech.com/products/1609400
IGO stock cap has one hole in it that's a tighter draw than a clogged up carto. But PMMA top cap has two holes for dual coil that isn't a bad draw. Just don't sub ohm without drilling them out more. I put a 1 ohm single coil of twisted 30 gauge and the airflow is great. Awesome flavor and vapor.
The Omega has some good and bad. Holes in posts are so low getting thicker wire through them is a pain. And they are so small that you couldn't put two 26 gauge through it on center post for dual coils.
I'll have to work it a bit but mine sit above the air holes so it heats real freaking fast at .4 ohms. But the holes are generously HUGE. Tons of airflow. Other than the well being IMO too deep, the only problem, which to me is kinda big, the cap spins way too freely. Just grabbing it you can close the holes off and tighten your draw or close completely. Have to check it every time you use it.
Other than some other nick nacks that came today, I can only say this.....
GET THE NEMESIS SWITCH MAGNETS
It will be the best thing you can ever do with your nemesis. I got one ten pack and am getting another. Two of them I tried didn't fit and I used three total. No more janky switch that clicks randomly and doesn't work sometimes. I can even set it standing up unlocked and doesn't fire. So nice now.
http://www.fasttech.com/products/1431800
http://www.fasttech.com/products/1609400
IGO stock cap has one hole in it that's a tighter draw than a clogged up carto. But PMMA top cap has two holes for dual coil that isn't a bad draw. Just don't sub ohm without drilling them out more. I put a 1 ohm single coil of twisted 30 gauge and the airflow is great. Awesome flavor and vapor.
The Omega has some good and bad. Holes in posts are so low getting thicker wire through them is a pain. And they are so small that you couldn't put two 26 gauge through it on center post for dual coils.
I'll have to work it a bit but mine sit above the air holes so it heats real freaking fast at .4 ohms. But the holes are generously HUGE. Tons of airflow. Other than the well being IMO too deep, the only problem, which to me is kinda big, the cap spins way too freely. Just grabbing it you can close the holes off and tighten your draw or close completely. Have to check it every time you use it.
Other than some other nick nacks that came today, I can only say this.....
GET THE NEMESIS SWITCH MAGNETS
It will be the best thing you can ever do with your nemesis. I got one ten pack and am getting another. Two of them I tried didn't fit and I used three total. No more janky switch that clicks randomly and doesn't work sometimes. I can even set it standing up unlocked and doesn't fire. So nice now.
I've been looking at getting a mechanical mod, but not looking to spend $100+ for it. Can any of you point me in the right direction? I was looking at something like the M16, but any help would be appreciated. Thanks guys.
Edit: Also, I just got an RDA and I was wondering what advantages there are to having different drip tips (if any), and if so, which are recommended.
Edit: Also, I just got an RDA and I was wondering what advantages there are to having different drip tips (if any), and if so, which are recommended.
Last edited:
My thinking exactly.... I have 20M incoming!
The only downside I see to the twisted wire is that it seems to gum up much faster with dark liquids. I did compare coils of the same resistance built with 24 gauge wire vs. twisted 33 gauge. The twisted wire coils performed just as you said, much, much faster heating time.
Is it usual that they change shipping days/status?
Ordered nemmy on 3rd/3 it said it would be shipped 10th. Now it's changed to 18th and on the nemmy page it still says 7 biz days....
Tad annoying I hope they ship it at the 18th...
Ordered nemmy on 3rd/3 it said it would be shipped 10th. Now it's changed to 18th and on the nemmy page it still says 7 biz days....
Tad annoying
I hope they ship it at the 18th...
Is it usual that they change shipping days/status?
Ordered nemmy on 3rd/3 it said it would be shipped 10th. Now it's changed to 18th and on the nemmy page it still says 7 biz days....
Tad annoying
lol, welcome to the wonderful world of shopping at FastTech. Happens a LOT.
- Status
Similar threads
- Locked
